Create readme.md

:D

.gitignore

@@ -0,0 +1,9 @@
+*.pyc
+*.swp
+.project
+.pydevproject
+.settings
+pagekite*
+.idea
+MANIFEST
+dist

README.md

@@ -0,0 +1,4 @@
+nagios-plugins
+==============
+
+Small army of nagios-plugins either made or maintained by opinkerfi

check_apcext.pl/check_apcext.pl

@@ -1,4 +1,5 @@
 #!/usr/bin/perl
+# nagios: -epn
 #
 # check_apcext.pl - APC Extra gear monitoring plugin for Nagios
 # 05.02.07 Paul Venezia
@@ -14,6 +15,7 @@ use vars qw/ %opt /;
 use strict;
 
 sub getmasked_values ($$);
+sub f2c ($);
 
 if ($ARGV[0] =~ /(--help|-h|help)/ || !defined$ARGV[0]) {
 	&usage;
@@ -40,11 +42,11 @@ my %rpduamps;
 my %oids = ( 
 	'nbmstemp' => {
 		'label' => 'Temp',
-		'unit'	=> ($metric ? 'degC' : 'degF'),
+		'unit'	=> 'degF',
 		'oidbase' => '.1.3.6.1.4.1.5528.100.4.1.1.1',
 		'sensor_key' => 5,
-		'sensor_val' => 2,
+		'sensor_val' => 9,
-		'cdef'  => ($metric ? '$val * 0.1' : '($val * .18) + 32')
+		#'cdef' => '$val * 0.1'
 		},
 	'nbmshum' => {
 		'label' => 'Humidity',
@@ -94,13 +96,13 @@ my %oids = (
 		},
 	'acscsupair' => {
 		'label' => 'Supply Air',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.8.0',
 		'cdef'  => '$val * .10'
 		},
 	'acscretair' => {
 		'label' => 'Return Air',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.10.0',
 		'cdef'  => '$val * .10'
 		},
@@ -111,19 +113,19 @@ my %oids = (
 		},
 	'acscracktemp' => {
 		'label' => 'Rack Inlet Temp',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.6.0',
 		'cdef'  => '$val * .10'
 		},
 	'acsccondin' => {
 		'label' => 'Cond Inlet Temp',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.30.0',
 		'cdef'  => '$val * .10'
 		},
 	'acsccondout' => {
 		'label' => 'Cond Outlet Temp',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.28.0',
 		'cdef'  => '$val * .10'
 		},
@@ -151,19 +153,19 @@ my %oids = (
 		},
 	'acrcracktemp' => {
 		'label' => 'Rack Inlet Temp',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.6.0',
 		'cdef'  => '$val * .10'
 		},
 	'acrcsupair' => {
 		'label' => 'Supply Air',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.8.0',
 		'cdef'  => '$val * .10'
 		},
 	'acrcretair' => {
 		'label' => 'Return Air',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.10.0',
 		'cdef'  => '$val * .10'
 		},
@@ -182,13 +184,13 @@ my %oids = (
 		},
 	'acrcflenttemp' => {
 		'label' => 'Entering Fluid Temp',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.23.0',
 		'cdef'  => '$val * .10'
 		},
 	'acrcflrettemp' => {
 		'label' => 'Returning Fluid Temp',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.25.0',
 		'cdef'  => '$val * .10'
 		},
@@ -367,6 +369,11 @@ if ($param eq "rpduamps") {
 			$fval = $val;
 		}
 
+		if ($metric and $oids{$param}->{unit} eq 'degF') {
+			$oids{$param}->{unit} = 'degC';
+			$fval = sprintf("%.1f", f2c($fval));
+		}
+
 		if ($fval > $crit) {
         		$retval = 2;
 			$outmsg = "CRITICAL";
@@ -417,6 +424,12 @@ APC ACRC In-Row
 
 }
 
+sub f2c($) {
+	my $f = shift;
+
+	return ($f - 32) * (5/9);
+}
+
 sub getmasked_values ($$) {
 	my ($baseoid, $values) = @_;
 

check_apcext.pl/nagios-okplugin-apc.spec

@@ -2,7 +2,7 @@
 
 Summary:	A Nagios plugin to check APC devices
 Name:		nagios-okplugin-apc
-Version:	0.0.2
+Version:	2.1.2
 Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
@@ -11,6 +11,7 @@ Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_apcext.pl/rel
 Requires:	nagios-plugins
 BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
 Packager:	Tomas Edwardsson <tommi@ok.is>
+BuildArch:	noarch
 
 
 %description
@@ -37,5 +38,21 @@ rm -rf %{buildroot}
 %{_libdir}/nagios/plugins/*
 
 %changelog
+* Mon Jun 09 2014 Tomas Edwardsson <tommi@tommi.org> 2.1.2-1
+- Disable embedded perl (tommi@tommi.org)
+
+* Thu Mar 20 2014 Tomas Edwardsson <tommi@tommi.org> 2.1.1-1
+- Merge github.com:opinkerfi/misc (palli@opensource.is)
+- Use the right value for the job nbmstemp (tommi@tommi.org)
+- Fixed metric conversion for all mibs (tommi@opensource.is)
+- Added fahrenheit to celsius conversion (tommi@tommi.org)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 2.1.0-1
+- Version number bumped to 2.1.0 (palli@opensource.is)
+- Added noarch buildarch (tommi@tommi.org)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.3-1
+- new package built with tito
+
 * Mon Mar  1 2010  Tomas Edwardsson <tommi@ok.is> 0.1-1
 - Initial packaging

check_apcext.pl/releases/0.0.1/nagios-okplugin-apc.spec

@@ -1,41 +0,0 @@
-%define debug_package %{nil}
-
-Summary:	A Nagios plugin to check APC devices
-Name:		nagios-okplugin-apc
-Version:	0.0.1
-Release:	1%{?dist}
-License:	GPLv2+
-Group:		Applications/System
-URL:		http://opensource.ok.is/trac/wiki/Nagios-OKPlugin-APC
-Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_apcext.pl/releases/nagios-okplugin-apc-%{version}.tar.gz
-Requires:	nagios-plugins
-BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Packager:	Tomas Edwardsson <tommi@ok.is>
-
-
-%description
-Checks APC devices, both netbotz and UPS
-
-%prep
-%setup -q
-#perl -pi -e "s|/usr/lib|%{_libdir}|g" check_sip
-
-%build
-
-
-%install
-rm -rf %{buildroot}
-install -D -p -m 0755 check_apcext.pl %{buildroot}%{_libdir}/nagios/plugins/check_apcext.pl
-install -D -p -m 0755 check_snmp_apc_ups %{buildroot}%{_libdir}/nagios/plugins/snmp_apc_ups
-
-%clean
-rm -rf %{buildroot}
-
-%files
-%defattr(-,root,root,-)
-%doc README
-%{_libdir}/nagios/plugins/*
-
-%changelog
-* Mon Mar  1 2010  Tomas Edwardsson <tommi@ok.is> 0.1-1
-- Initial packaging

check_apcext.pl/trunk/README

@@ -1 +0,0 @@
-check_apcext.pl - APC Extra gear checks (netbotz/pdus)

check_apcext.pl/trunk/check_apcext.pl

@@ -1,447 +0,0 @@
-#!/usr/bin/perl
-#
-# check_apcext.pl - APC Extra gear monitoring plugin for Nagios
-# 05.02.07 Paul Venezia
-#
-# v0.0.1
-#
-#
-
-use Net::SNMP;
-use Getopt::Std;
-use Data::Dumper;
-use vars qw/ %opt /;
-use strict;
-
-sub getmasked_values ($$);
-
-if ($ARGV[0] =~ /(--help|-h|help)/ || !defined$ARGV[0]) {
-	&usage;
-	exit 0;
-}
-
-my $opts = 's:lmC:H:p:w:c:';
-getopts ( "$opts", \%opt ) or &usage;
-
-
-my $host = $opt{H};
-my $comm = $opt{C};
-my $param = $opt{p};
-my $warn = $opt{w};
-my $crit = $opt{c};
-my $metric = $opt{m};
-my $list = $opt{l};
-my $sensor_int_name = $opt{s};
-
-my ($oid, $oidbase, $fval, $unit, $outmsg);
-my $retval = 0;
-my %rpduamps;
-
-my %oids = ( 
-	'nbmstemp' => {
-		'label' => 'Temp',
-		'unit'	=> ($metric ? 'degC' : 'degF'),
-		'oidbase' => '.1.3.6.1.4.1.5528.100.4.1.1.1',
-		'sensor_key' => 5,
-		'sensor_val' => 2,
-		'cdef'  => ($metric ? '$val * 0.1' : '($val * .18) + 32')
-		},
-	'nbmshum' => {
-		'label' => 'Humidity',
-		'unit'	=> '%',
-		'oidbase' 	=> '.1.3.6.1.4.1.5528.100.4.1.2.1',
-		'sensor_key' => 5,
-		'sensor_val' => 8,
-		},
-	'nbmsairflow' => {
-		'label' => 'Air Flow',
-		'unit'	=> 'CFM',
-		'oidbase' 	=> '.1.3.6.1.4.1.5528.100.4.1.5.1',
-		'sensor_val' => 8,
-		'sensor_key' => 5,
-		'mod'	=> 'lt'
-		},
-	'nbmsaudio' => {
-		'label' => 'Audio Level',
-		'unit'	=> '',
-		'oidbase' 	=> '.1.3.6.1.4.1.5528.100.4.1.4.1',
-		'sensor_val' => 7,
-		'sensor_key' => 5,
-		'mod'	=> ''
-		},
-	'rpduamps' => {
-		'label' => 'Power Output',
-		'unit'	=> 'Amps',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.12.2.3.1.1.2.',
-		'cdef'  => '$val * .10'
-		},
-	'acscstatus' => {
-		'label' => 'Status',
-		'unit'	=> '',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.1.0'
-		},
-	'acscload' => {
-		'label' => 'Cooling Load',
-		'unit'	=> 'kW',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.3.0',
-		'cdef'  => '$val * .10'
-		},
-	'acscoutput' => {
-		'label' => 'Cooling output',
-		'unit'	=> 'kW',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.2.0',
-		'cdef'  => '$val * .10'
-		},
-	'acscsupair' => {
-		'label' => 'Supply Air',
-		'unit'	=> 'F',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.8.0',
-		'cdef'  => '$val * .10'
-		},
-	'acscretair' => {
-		'label' => 'Return Air',
-		'unit'	=> 'F',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.10.0',
-		'cdef'  => '$val * .10'
-		},
-	'acscairflow' => {
-		'label' => 'Airflow',
-		'unit'	=> 'CFM',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.4.0',
-		},
-	'acscracktemp' => {
-		'label' => 'Rack Inlet Temp',
-		'unit'	=> 'F',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.6.0',
-		'cdef'  => '$val * .10'
-		},
-	'acsccondin' => {
-		'label' => 'Cond Inlet Temp',
-		'unit'	=> 'F',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.30.0',
-		'cdef'  => '$val * .10'
-		},
-	'acsccondout' => {
-		'label' => 'Cond Outlet Temp',
-		'unit'	=> 'F',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.28.0',
-		'cdef'  => '$val * .10'
-		},
-	'acrcstatus' => {
-		'label' => 'Status',
-		'unit'	=> '',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.1.0'
-		},
-	'acrcload' => {
-		'label' => 'Cooling Load',
-		'unit'	=> 'kW',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.2.0',
-		'cdef'  => '$val * .10'
-		},
-	'acrcoutput' => {
-		'label' => 'Cooling Output',
-		'unit'	=> 'kW',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.3.0',
-		'cdef'  => '$val * .10'
-		},
-	'acrcairflow' => {
-		'label' => 'Airflow',
-		'unit'	=> 'CFM',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.4.0'
-		},
-	'acrcracktemp' => {
-		'label' => 'Rack Inlet Temp',
-		'unit'	=> 'F',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.6.0',
-		'cdef'  => '$val * .10'
-		},
-	'acrcsupair' => {
-		'label' => 'Supply Air',
-		'unit'	=> 'F',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.8.0',
-		'cdef'  => '$val * .10'
-		},
-	'acrcretair' => {
-		'label' => 'Return Air',
-		'unit'	=> 'F',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.10.0',
-		'cdef'  => '$val * .10'
-		},
-	'acrcfanspeed' => {
-		'label' => 'Fan Speed',
-		'unit'	=> '%',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.16.0',
-		'cdef'	=> '$val * .10',
-		},
-	'acrcfluidflow' => {
-		'label' => 'Fluid Flow',
-		'unit'	=> 'GPM',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.21.0',
-		'cdef'	=> '$val * .10',
-		'mod'	=> 'lt'
-		},
-	'acrcflenttemp' => {
-		'label' => 'Entering Fluid Temp',
-		'unit'	=> 'F',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.23.0',
-		'cdef'  => '$val * .10'
-		},
-	'acrcflrettemp' => {
-		'label' => 'Returning Fluid Temp',
-		'unit'	=> 'F',
-		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.25.0',
-		'cdef'  => '$val * .10'
-		},
-	);
-
-if ($list) {
-        my ($baseoid, $int_name_id, $value_id) = @_;
-
-	my ($session, $error) = Net::SNMP->session(
-                                           -hostname  => $host,
-                                           -community => $comm,
-                                           -version   => 1,
-               #                                           -translate => [-octetstring => 0x0],
-                                           -port      => "161"
-                                         );
-	my $response = $session->get_table(-baseoid => ".1.3.6.1.4.1.5528.100.2.1.1");
-        my $err = $session->error;
-        if ($err){
-                $retval = 3;
-                $outmsg = "UNKNOWN";
-                $session->close();
-                print "$outmsg $err - SNMP Error connecting to $host\n";
-                exit $retval;
-        }
-	my %sensor;
-	foreach my $k (keys %{$response}) {
-		my ($type, $id) = (split(/\./, $k))[-2,-1];
-		next if ($type != 1 and $type != 4);
-		next if ($id <  2000000000);
-		if ($type == 1) {
-			$sensor{$id}->{"int_name"} = $response->{$k};
-		} else {
-			$sensor{$id}->{"friendly_name"} = $response->{$k};
-		}
-	}
-
-	print <<"	EO";
-Specify a sensor by using the -s and the INTERNAL name of the sensor
-
-Detected sensors:
-
-	EO
-	printf("\t%-32s %s\n", "Friendly Name", "Internal Name");
-	foreach my $id (sort { $sensor{$a}->{"friendly_name"} cmp $sensor{$b}->{"friendly_name"} } keys %sensor) {
-		printf ("\t%-32s %s\n", "\"$sensor{$id}->{friendly_name}\"", "\"$sensor{$id}->{int_name}\"");
-	}
-	exit 0;
-
-
-} elsif (!$oids{$param}) {
-	print "No test parameter specified";
-	exit 3;
-} else {
-	$oid = $oids{$param}->{oid};
-	$oidbase = $oids{$param}->{oidbase};
-}
-
-my ($session, $error) = Net::SNMP->session(
-                                           -hostname  => $host,
-                                           -community => $comm,
-                                           -version   => 1,
-               #                                           -translate => [-octetstring => 0x0],
-                                           -port      => "161"
-                                         );
-
-	
-if ($param eq "rpduamps") {
-#	$param = "RackPDU";
-	my $i;
-	for ($i=1;$i<4;$i++) {
-	  my $phoid = $oid . $i;
-	  my $response = $session->get_request($phoid);
-	my $err = $session->error;
-	if ($err){
-	        $retval = 3;
-		$outmsg = "UNKNOWN";
-		$session->close();
-		print "$outmsg $err - SNMP Error connecting to $host\n";
-		exit $retval;		
-	}
-	  $rpduamps{$i} = $response->{$phoid};
-	}
-		$session->close;
-		#$crit = ($crit * 10);
-		#$warn = ($warn * 10);
-
-	$unit = "Amps";
-	foreach my $ph ( sort keys %rpduamps ) {
-		my $tphase = ($rpduamps{$ph} * .1);
-
-		if (($tphase >= $crit) && ($retval < 2)) {
-			$retval = 2;
-			$outmsg = "CRITICAL";
-			
-		} elsif (($tphase >= $warn) && ($retval < 1)) {
-			$retval = 1;
-			$outmsg = "WARNING";
-		
-		} elsif ($retval < 1) {
-			$retval = 0;
-			$outmsg = "OK";
-		}
-		
-		$fval .= "Phase $ph: " . $tphase;
-		#$fval .= "Phase $ph: " . ($tphase * .1);
-		if ($ph lt 3) {
-			$fval .= " Amps, ";
-		#} else {
-		#	$fval .= " ";
-		}
-		
-	}
-	
-} else {
-	my $val;
-	if ($oid) {
-		my $response = $session->get_request($oid);
-
-		my $err = $session->error;
-		if ($err){
-	        	$retval = 3;
-			$outmsg = "UNKNOWN";
-			$session->close();
-			print "$outmsg $err - SNMP Error connecting to $host\n";
-			exit $retval;		
-		}
-	
-	
-		$val = $response->{$oid};
-		$session->close();
-	
-	
-	} else {
-		my $snmpd = getmasked_values($oidbase, { $oids{$param}->{sensor_key} => 'sensor_key',
-						$oids{$param}->{sensor_val} => 'sensor_val' });
-
-		if ((keys %{$snmpd}) > 1 && !$sensor_int_name) {
-			print "UNKNOWN - Many sensors found but none specified, see -s and -l\n";
-			exit 3;
-		} elsif ((keys %{$snmpd}) == 0) {
-			print "UNKNOWN - no sensors found on this device\n";
-			exit 3;
-		} else {
-			my $id = (keys %{$snmpd})[0];
-			$val = $snmpd->{$id}->{sensor_val};
-		}
-
-		if ($sensor_int_name) {
-			foreach my $k (keys %{$snmpd}) {
-				if (lc($snmpd->{$k}->{sensor_key}) eq lc($sensor_int_name)) {
-					$val = $snmpd->{$k}->{sensor_val};
-				}
-			}
-		}
-		if ($val eq "") {
-			print Dumper $snmpd;
-			print "UNKNOWN Unable to get sensor status\n";
-			exit 3;
-		}
-	}
-	if ($param eq "acscstatus" || $param eq "acrcstatus") {
-		if ($val == 1) {
-			$fval = "Standby";
-	       		$retval = 1;
-			$outmsg = "WARNING";
-		} elsif ($val == 2) {
-			$fval = "On";
-	       		$retval = 0;
-			$outmsg = "OK";
-		}
-	} else {
-
-		if ($oids{$param}->{cdef}) {
-			$fval = eval "$oids{$param}->{cdef}";
-		} else {
-			$fval = $val;
-		}
-
-		if ($fval > $crit) {
-        		$retval = 2;
-			$outmsg = "CRITICAL";
-		} elsif ($fval > $warn) {	
-        		$retval = 1;
-			$outmsg = "WARNING";
-		} else {
-			$retval = 0;
-			$outmsg = "OK";
-		}
-	}
-} 
-
-print "$outmsg - " . $oids{$param}->{label} . " " .$fval . " " . $oids{$param}->{unit} . " | $param=$fval$oids{$param}->{unit}\n";
-
-
-exit $retval;
-
-sub usage {
-
-print "Usage: $0 -H <hostip> -C <community> -p <parameter> -w <warnval> -c <critval> [-l] [-s sensor]\n";
-print "\nParameters:\n";
-print  <<"	EO";
-APC NetBotz 
-	nbmstemp	NetBotz main sensor temp	| nbmshum 	NetBotz main sensor humidity
-	nbmsairflow	NetBotz main sensor airflow	| nbmsaudio	NetBotz main sensor audio
-	-l 		List connected sensors		| -s sensor	Sensor we want info from
-
-APC Metered Rack PDU
-	rpduamps	Amps on each phase
-
-APC ACSC In-Row
-	acscstatus	System status (on/standby)	| acscload	Cooling load
-	acscoutput	Cooling output			| acscsupair	Supply air
-	acscairflow	Air flow			| acscracktemp	Rack inlet temp
-	acsccondin	Condenser input temp		| acsccondout	Condenser outlet temp 
-
-APC ACRC In-Row
-	acrcstatus	System status (on/standby)	| acrcload	Cooling load
-	acrcoutput	Cooling output			| acrcairflow	Air flow
-	acrcracktemp	Rack inlet temp			| acrcsupair	Supply air
-	acrcretair	Return air			| acrcfanspeed	Fan speed
-	acrcfluidflow	Fluid flow			| acrcflenttemp	Fluid entering temp
-	acrcflrettemp	Fluid return temp
-	EO
-
-	exit 3;
-
-}
-
-sub getmasked_values ($$) {
-	my ($baseoid, $values) = @_;
-
-	my ($session, $error) = Net::SNMP->session(
-                                           -hostname  => $host,
-                                           -community => $comm,
-                                           -version   => 1,
-                                           -port      => "161"
-                                         );
-	my $response = $session->get_table(-baseoid => $baseoid);
-        my $err = $session->error;
-        if ($err){
-                $retval = 3;
-                $outmsg = "UNKNOWN";
-                $session->close();
-                print "$err - SNMP Error connecting to $host\n";
-                exit $retval;
-        }
-
-	my %snmpdata;
-	foreach my $k (keys %{$response}) {
-		my ($type, $id) = (split(/\./, $k))[-2,-1];
-		if ($values->{$type}) {
-			$snmpdata{$id}->{$values->{$type}} = $response->{$k};
-		}
-	}
-	return \%snmpdata;
-}

check_apcext.pl/trunk/check_snmp_apc_ups

@@ -1,562 +0,0 @@
-#!/usr/bin/perl
-
-#    Copyright (C) 2004 Altinity Limited
-#    E: info@altinity.com    W: http://www.altinity.com/
-#    
-#    Edited by Roderick Derks (roderick@r71.nl)
-#    I changed the output of this plugin so it can bu used with Nagiosgrapher
-#    to create nice graphs (output is in hours is changed to minutes). 
-#
-#    This program is free software; you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation; either version 2 of the License, or
-#    (at your option) any later version.
-#    
-#    This program is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.    See the
-#    GNU General Public License for more details.
-#    
-#    You should have received a copy of the GNU General Public License
-#    along with this program; if not, write to the Free Software
-#    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA    02111-1307    USA
-#
-#    Adjusted by Roderick Derks (roderick@r71.nl)
-#    Output of snmp query for remaing battery runtime is in minutes or in hours. This
-#    is a problem when you want to create some nice graphs because of the different
-#    output. Now hours are converted to minutes.
-#
-
-use Net::SNMP;
-use Getopt::Std;
-
-$script    = "check_snmp_apcups";
-$script_version = "2.1.0";
-
-$metric = 1;
-
-$ipaddress = "192.168.1.1"; 	# default IP address, if none supplied
-$version = "1";			# SNMP version
-$timeout = 2;			# SNMP query timeout
-# $warning = 100;			
-# $critical = 150;
-$status = 0;
-$returnstring = "";
-
-$community = "public"; 			# Default community string
-
-
-# .1.3.6.1.4.1.
-# enterprises.318.1.1.1.1.1.1.0 = STRING: "SMART-UPS 1000"		upsIdent
-
-# enterprises.318.1.1.1.2.2.1.0			Battery capacity (%)
-# enterprises.318.1.1.1.2.2.2.0			Temperature (Celcius)
-# enterprises.318.1.1.1.2.2.3.0			Battery runtime remaining
-# enterprises.318.1.1.1.2.2.4.0			Battery replace indicator (1=ok, 2=replace)
-# enterprises.318.1.1.1.2.2.5.0			Number of battery packs
-# enterprises.318.1.1.1.2.2.6.0			Number of bad battery packs
- 
-# enterprises.318.1.1.1.3.2.1.0			Input voltage
-# enterprises.318.1.1.1.3.2.4.0			Input frequency
-# enterprises.318.1.1.1.3.2.5.0			Reason for last transfer to UPS battery power:
-
-# enterprises.318.1.1.1.4.2.1.0			Output voltage
-# enterprises.318.1.1.1.4.2.2.0			Output frequency
-# enterprises.318.1.1.1.4.2.3.0			Output load as % of capacity
-# enterprises.318.1.1.1.4.2.4.0			Output current in ampheres
-
-# enterprises.318.1.1.1.4.2.1.0			Configured voltage
-# enterprises.318.1.1.1.8.1.0			Whether agent is communicating with UPS (1)
-
-$oid_upstype = ".1.3.6.1.4.1.318.1.1.1.1.1.1.0";
-$oid_battery_capacity = ".1.3.6.1.4.1.318.1.1.1.2.2.1.0";
-$oid_battery_temperature = ".1.3.6.1.4.1.318.1.1.1.2.2.2.0";
-$oid_battery_runtimeremain = ".1.3.6.1.4.1.318.1.1.1.2.2.3.0";
-$oid_battery_replace = ".1.3.6.1.4.1.318.1.1.1.2.2.4.0";
-$oid_input_voltage = ".1.3.6.1.4.1.318.1.1.1.3.2.1.0";
-$oid_input_frequency = ".1.3.6.1.4.1.318.1.1.1.3.2.4.0";
-$oid_input_reasonforlasttransfer = ".1.3.6.1.4.1.318.1.1.1.3.2.5.0";
-$oid_output_voltage = ".1.3.6.1.4.1.318.1.1.1.4.2.1.0";
-$oid_output_frequency = ".1.3.6.1.4.1.318.1.1.1.4.2.2.0";
-$oid_output_load = ".1.3.6.1.4.1.318.1.1.1.4.2.3.0";
-$oid_output_current = ".1.3.6.1.4.1.318.1.1.1.4.2.4.0";
-$oid_output_configuredvoltage = ".1.3.6.1.4.1.318.1.1.1.4.2.1.0";
-$oid_comms = ".1.3.6.1.4.1.318.1.1.1.8.1.0";
-$oid_test_result = ".1.3.6.1.4.1.318.1.1.1.7.2.3.0";
-$oid_test_date = ".1.3.6.1.4.1.318.1.1.1.7.2.4.0";
-$oid_sysDescr = ".1.3.6.1.2.1.1.1.0";
-
-$upstype = "";
-$battery_capacity = 0;
-$battery_temperature = 0;
-$battery_runtimeremain = 0;
-$battery_replace = "";
-$input_voltage = 0;
-$input_frequency = 0;
-$input_reasonforlasttransfer = "";
-$output_voltage = 0;
-$output_frequency = 0;
-$output_load = 0;
-$output_current = 0;
-$output_configuredvoltage = 0;
-$outagecause = "";
-$test_result = "";
-$test_date = "";
-
-
-# Do we have enough information?
-if (@ARGV < 1) {
-     print "Too few arguments\n";
-     usage();
-}
-
-getopts("h:H:C:w:c:");
-if ($opt_h){
-    usage();
-    exit(0);
-}
-if ($opt_H){
-    $hostname = $opt_H;
-}
-else {
-    print "No hostname specified\n";
-    usage();
-}
-if ($opt_C){
-    $community = $opt_C;
-}
-else {
-}
-
-
-
-# Create the SNMP session
-my ($s, $e) = Net::SNMP->session(
-     -community  =>  $community,
-     -hostname   =>  $hostname,
-     -version    =>  $version,
-     -timeout    =>  $timeout,
-);
-
-main();
-
-# Close the session
-$s->close();
-
-if ($returnstring eq ""){
-    $status = 3;
-}
-
-if ($status == 0){
-    print "Status is OK - $returnstring\n";
-    # print "$returnstring\n";
-}
-elsif ($status == 1){
-    print "Status is a WARNING level - $returnstring\n";
-}
-elsif ($status == 2){
-    print "Status is CRITICAL - $returnstring\n";
-}
-else{
-    print "Problem with plugin. No response from SNMP agent.\n";
-}
- 
-exit $status;
-
-
-####################################################################
-# This is where we gather data via SNMP and return results         #
-####################################################################
-
-sub main {
-
-    #######################################################
- 
-    if (!defined($s->get_request($oid_comms))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-     foreach ($s->var_bind_names()) {
-         $temp = $s->var_bind_list()->{$_};
-    }
-    
-    if ($temp eq "1"){
-    }
-    else {
-        append("SNMP agent not communicating with UPS");
-        $status = 2;
-        return 1;
-    }
-    
-    
-    #######################################################
- 
-    if (!defined($s->get_request($oid_upstype))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-     foreach ($s->var_bind_names()) {
-         $upstype = $s->var_bind_list()->{$_};
-    }
-    
-    #######################################################
- 
-    if (!defined($s->get_request($oid_battery_capacity))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-     foreach ($s->var_bind_names()) {
-         $battery_capacity = $s->var_bind_list()->{$_};
-    }
-    #######################################################
- 
-    if (!defined($s->get_request($oid_battery_temperature))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-     foreach ($s->var_bind_names()) {
-         $battery_temperature = $s->var_bind_list()->{$_};
-    }
-    #######################################################
- 
-    if (!defined($s->get_request($oid_battery_runtimeremain))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-     foreach ($s->var_bind_names()) {
-         $battery_runtimeremain = $s->var_bind_list()->{$_};
-    }
-
-    # RRD if output is in hours, change it to minutes so we can make a nice graph
-    if ( $battery_runtimeremain =~ "hour" ) {
-       $battery_runtimeremain2 = "$battery_runtimeremain";
-       $battery_runtimeremain =~s/hour.*//g;
-       $battery_runtimeremain = $battery_runtimeremain*60;
-       $battery_runtimeremain = "$battery_runtimeremain minutes";
-    }
-
-    #######################################################
- 
-    if (!defined($s->get_request($oid_battery_replace))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-     foreach ($s->var_bind_names()) {
-         $battery_replace = $s->var_bind_list()->{$_};
-    }
-    #######################################################
- 
-    if (!defined($s->get_request($oid_input_voltage))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-     foreach ($s->var_bind_names()) {
-         $input_voltage = $s->var_bind_list()->{$_};
-    }
-    #######################################################
- 
-    if (!defined($s->get_request($oid_input_frequency))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-     foreach ($s->var_bind_names()) {
-         $input_frequency = $s->var_bind_list()->{$_};
-    }
-    #######################################################
- 
-    if (!defined($s->get_request($oid_input_reasonforlasttransfer))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-     foreach ($s->var_bind_names()) {
-         $input_reasonforlasttransfer = $s->var_bind_list()->{$_};
-    }
-    #######################################################
- 
-    if (!defined($s->get_request($oid_output_voltage))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-     foreach ($s->var_bind_names()) {
-         $output_voltage = $s->var_bind_list()->{$_};
-    }
-    #######################################################
- 
-    if (!defined($s->get_request($oid_output_frequency))) {
-        if (!defined($s->get_request($oid_sysDescr))) {            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-     foreach ($s->var_bind_names()) {
-         $output_frequency = $s->var_bind_list()->{$_};
-    }
-    #######################################################
- 
-    if (!defined($s->get_request($oid_output_load))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-     foreach ($s->var_bind_names()) {
-         $output_load = $s->var_bind_list()->{$_};
-    }
-    #######################################################
- 
-    if (!defined($s->get_request($oid_test_result))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-    foreach ($s->var_bind_names()) {
-         $test_result = $s->var_bind_list()->{$_};
-    }
-    #######################################################
-
-    if (!defined($s->get_request($oid_test_date))) {
-        if (!defined($s->get_request($oid_sysDescr))) {
-            $returnstring = "SNMP agent not responding";
-            $status = 1;
-            return 1;
-        }
-        else {
-            $returnstring = "SNMP OID does not exist";
-            $status = 1;
-            return 1;
-        }
-    }
-    foreach ($s->var_bind_names()) {
-         $test_date = $s->var_bind_list()->{$_};
-    }
-    #######################################################
-     
-    $issue = "";
-
-    if ($input_reasonforlasttransfer eq "1"){
-        $outagecause = "No events"
-    }
-    elsif ($input_reasonforlasttransfer eq "2"){
-        $outagecause = "High line voltage"
-    }
-    elsif ($input_reasonforlasttransfer eq "3"){
-        $outagecause = "Brownout"
-    }
-    elsif ($input_reasonforlasttransfer eq "4"){
-        $outagecause = "Loss of mains power"
-    }
-    elsif ($input_reasonforlasttransfer eq "5"){
-        $outagecause = "Small temporary power drop"
-    }
-    elsif ($input_reasonforlasttransfer eq "6"){
-        $outagecause = "Large temporary power drop"
-    }
-    elsif ($input_reasonforlasttransfer eq "7"){
-        $outagecause = "Small spike"
-    }
-    elsif ($input_reasonforlasttransfer eq "8"){
-        $outagecause = "Large spike"
-    }
-    elsif ($input_reasonforlasttransfer eq "9"){
-        $outagecause = "UPS self test"
-    }
-    elsif ($input_reasonforlasttransfer eq "10"){
-        $outagecause = "Excessive input voltage fluctuation"
-    }
-    else {
-        $outagecause = "Cannot establish reason"
-    }
-
-
-    if ($test_result eq "1") {
-        $test_result_string = "Passed";
-    }
-    elsif ($test_result eq "2") {
-        $test_result_string = "Failed";
-    }
-    elsif ($test_result eq "4") {
-        $test_result_string = "In Progress";
-    }
-    else {
-        $test_result_string = "Unknown";
-    }
-
-
-    if ($battery_capacity < 50) {
-        $issue = $issue . "BATTERY CAPACITY WARNING! ";
-        $status = 1;
-    }
-    if ($output_load > 80) {
-        $status = 1;
-        $issue = $issue . "OUTPUT LOAD WARNING! ";
-    }
-    if ($test_result eq "2") {
-        $issue = $issue . "SELF TEST FAILED! ";
-        $status = 1;
-    }
-    if ($input_voltage < 1){
-        $status = 2;
-        $issue = $issue . "RUNNING ON BATTERY! ";
-    }
-    if ($battery_capacity < 25) {
-        $issue = $issue . "BATTERY RUNNING LOW! ";
-        $status = 2;
-    }
-    if ($output_load > 90) {
-        $issue = $issue . "HIGH OUTPUT LOAD! ";
-        $status = 2;
-    }
-    if ($battery_replace eq "2") {
-        $issue = $issue . "REPLACE BATTERY! ";
-        $status = 2; 
-    }
-
-    # Modified by Pall Sigurdsson <palli@opensource.is> to add some perfdata
-    # Modified 2010-06-03
-    my $perfdata="| 'battery_capacity'=$battery_capacity% 'temperature'=$battery_temperature  'input_voltage'=$input_voltage input_frequency=$input_frequency output_voltage=$output_voltage output_frequency=$output_frequency output_load=$output_load%";
-
-
-    if ($status == 0){
-        $temp = sprintf "$upstype - BATTERY:(capacity $battery_capacity%%, temperature $battery_temperature C, runtime $battery_runtimeremain) INPUT:(voltage $input_voltage V, frequency $input_frequency Hz) OUTPUT:(voltage $output_voltage V, frequency $output_frequency Hz, load $output_load%%) SELF TEST:($test_result_string on $test_date) LAST EVENT:($outagecause) $perfdata";
-    }
-    else {
-        $temp = sprintf "$issue - $upstype - BATTERY:(capacity $battery_capacity%%, temperature $battery_temperature C, runtime $battery_runtimeremain) INPUT:(voltage $input_voltage V, frequency $input_frequency Hz) OUTPUT:(voltage $output_voltage V, frequency $output_frequency Hz, load $output_load%%)    LAST EVENT:$outagecause $perfdata ";
-    }
-    append($temp);
-
-}
-
-####################################################################
-# help and usage information                                       #
-####################################################################
-
-sub usage {
-    print << "USAGE";
------------------------------------------------------------------	 
-$script v$script_version
-
-Monitors APC SmartUPS via AP9617 SNMP management card.
-
-Usage: $script -H <hostname> -c <community> [...]
-
-Options: -H 	Hostname or IP address
-         -C 	Community (default is public)
-	 
------------------------------------------------------------------	 
-Copyright 2004 Altinity Limited	 
-	 
-This program is free software; you can redistribute it or modify
-it under the terms of the GNU General Public License
------------------------------------------------------------------
-
-USAGE
-     exit 1;
-}
-
-####################################################################
-# Appends string to existing $returnstring                         #
-####################################################################
-
-sub append {
-    my $appendstring =    @_[0];    
-    $returnstring = "$returnstring$appendstring";
-}
-

check_bl/nagios-okplugin-mailblacklist.spec

@@ -2,8 +2,8 @@
 
 Summary:	A Nagios plugin to check SMTP blacklists
 Name:		nagios-okplugin-mailblacklist
-Version:	0.0.1
+Version:	1.1
-Release:	1%{?dist}
+Release:	2%{?dist}
 License:	GPLv2+
 Group:		Applications/System
 URL:		http://opensource.ok.is/trac/wiki/Nagios-OKPlugin-MailBlacklist
@@ -11,7 +11,8 @@ Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_bl/releases/%
 Requires:	nagios-plugins
 Requires:	nagios-plugins-perl
 BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Packager:	Tomas Edwardsson <tommi@ok.is>
+Packager:	Gardar Thorsteinsson <gardar@ok.is>
+BuildArch:	noarch
 
 
 %description
@@ -21,6 +22,8 @@ Checks DNS Blacklists for existance of hosts
 %setup -q
 perl -pi -e "s|/usr/lib|%{_libdir}|g" check_bl
 
+%global __requires_exclude %{?__requires_exclude:%__requires_exclude}|}^perl\\(utils\\)
+
 %build
 
 
@@ -37,5 +40,17 @@ rm -rf %{buildroot}
 %{_libdir}/nagios/plugins/*
 
 %changelog
+* Fri May 04 2018 Richard Allen <ra@ok.is> 1.1-2
+- Filter out perl-utils dependancy
+
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 1.1-1
+- 
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.0-1
+- Updated buildarch to noarch (tommi@tommi.org)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.2-1
+- new package built with tito
+
 * Mon Mar  1 2010  Tomas Edwardsson <tommi@ok.is> 0.1-1
 - Initial packaging

check_bl/releases/0.0.1/check_bl

@@ -1,160 +0,0 @@
-#!/usr/bin/perl -w
-#
-# check_bl plugin for nagios
-# $Revision: 1.0 $ 
-# 
-# Nagios plugin designed to warn you if you mail servers appear in one of the 
-# many anti-spam 'blacklists'
-#
-# By Sam Bashton, Bashton Ltd
-# bashton.com/content/nagios-plugins
-#
-#    This program is free software; you can redistribute it and/or modify
-#    it under the terms of the GNU General Public License as published by
-#    the Free Software Foundation; either version 2 of the License, or
-#    (at your option) any later version.
-#
-#    This program is distributed in the hope that it will be useful,
-#    but WITHOUT ANY WARRANTY; without even the implied warranty of
-#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-#    GNU General Public License for more details.
-#
-#    You should have received a copy of the GNU General Public License
-#    along with this program; if not, write to the Free Software
-#    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-
-use strict;
-use lib "/usr/lib/nagios/plugins";
-use utils qw($TIMEOUT %ERRORS &print_revision &support);
-use Net::DNS;
-use vars qw($PROGNAME);
-my ($verbose,$host),;
-my ($opt_V,$opt_h,$opt_B,$opt_H,$opt_c);
-$opt_V = $opt_h = $opt_B = $opt_H = $opt_c = '';
-my $state = 'UNKNOWN';
-sub print_help();
-sub print_usage();
-
-$PROGNAME = "check_bl";
-
-$ENV{'BASH_ENV'}=''; 
-$ENV{'ENV'}='';
-$ENV{'PATH'}='';
-$ENV{'LC_ALL'}='C';
-
-use Getopt::Long;
-Getopt::Long::Configure('bundling');
-GetOptions(
-  "V"   => \$opt_V,   "version"       => \$opt_V,
-  "h"   => \$opt_h,   "help"          => \$opt_h,
-  "H=s" => \$opt_H,   "hostname=s"    => \$opt_H,
-  "B=s" => \$opt_B,   "blacklists=s"  => \$opt_B,
-  "c=s" => \$opt_c,   "critical=s"    => \$opt_c
-);
-
-# -h means display verbose help screen
-if ($opt_h) { print_help(); exit $ERRORS{'OK'}; }
-
-# -V means display version number
-if ($opt_V) { 
-  print_revision($PROGNAME,'$Revision: 1.0 $ '); 
-  exit $ERRORS{'OK'}; 
-}
-
-# First check the hostname is OK..
-unless ($opt_H) { print_usage(); exit $ERRORS{'UNKNOWN'}; }
-
-if (! utils::is_hostname($opt_H)){
-  print "$opt_H is not a valid host name\n";
-  print_usage();
-  exit $ERRORS{"UNKNOWN"};
-}else{
-  if ($opt_H =~ /[a-zA-Z]/ )
-  # If the host contains letters we assume it's a hostname, not an IP
-  {  
-    $host = lookup($opt_H);
-  }
-  else { $host = $opt_H }
-}
-
-
-# $opt_c is a count of the blacklists a mail server is in,
-# after which state will be CRITICAL rather than WARNING
-# By default any listing is CRITICAL
-my $critcount = 0;
-if ($opt_c) { $critcount = $opt_c };
-
-# $opt_B is a comma seperated list of blacklists
-$opt_B = shift unless ($opt_B);
-unless ($opt_B) { print_usage(); exit -1 }
-my @bls = split(/,/, $opt_B);
-
-
-# Just in case of problems, let's not hang Nagios
-$SIG{'ALRM'} = sub {
-  print ("ERROR: No response from BL server (alarm)\n");
-  exit $ERRORS{"UNKNOWN"};
-};
-alarm($TIMEOUT);
-
-my %listed; # Hash of blacklists we're listed in.
-foreach(@bls)
-{
-  if (blcheck($host,$_)) { $listed{$_} = 1 }
-}
-
-if (scalar(keys(%listed)) == 0) { $state = 'OK' }
-elsif (scalar(keys(%listed)) < $critcount) { $state = 'WARNING' }
-else { $state = 'CRITICAL' }
-
-if (%listed) 
-{
-  print "Listed at"; 
-  foreach (keys(%listed)) { print " $_" }
-  print "\n";
-}
-else { print "Not black-listed\n" }
-
-exit $ERRORS{$state};
-
-
-########  Subroutines ==========================
-
-
-sub print_help() {
-  print_revision($PROGNAME,'$Revision: 1.0 $ ');
-  print "\n";
-  support();
-}
-
-sub print_usage () {
-  print "Usage: \n";
-  print " $PROGNAME -H host -B [blacklist1],[blacklist2] [-c critnum]\n";
-  print " $PROGNAME [-h | --help]\n";
-  print " $PROGNAME [-V | --version]\n";
-}
-
-sub blcheck
-{
-  my ($ip, $bl) = @_;
-  my $lookupip = $ip;
-  $lookupip =~
-  s/([0-9]{1,3})\.([0-9]{1,3})\.([0-9]{1,3})\.([0-9]{1,3})/$4.$3.$2.$1.$bl/;
-  if (lookup($lookupip)) { return 1 }
-  else { return 0 }
-}
-
-sub lookup
-{
-  my $tolookup = shift;
-  my $res = Net::DNS::Resolver->new;
-  my $query = $res->search($tolookup);
-  if ($query)
-  {
-    foreach my $rr ($query->answer)
-    {
-      next unless $rr->type eq "A"; # We're not interested in TXT records
-      return $rr->address;
-    }
-  }
-}

check_bl/trunk/README

@@ -1,44 +0,0 @@
-Nagios check_bl plugin (C)Copyright 2005 Bashton Ltd
-----------------------------------------------------
-
-A Nagios plugin to check whether a server is in any known anti-spam
-blocklists.  Licensed under the GNU GPL v2.0 or later (at your option).  For
-full copyright and warranty details, please see the COPYING file included in
-this package.
-
-By Sam Bashton, Bashton Ltd - sam@bashton.com www.bashton.com
-
-Comments, bug reports etc are welcome.
-
-Pre-Requisites
---------------
-
-- Working Nagios install
-- Perl 5 (tested with Perl 5.6.1 and 5.8)
-- Net::DNS Perl library and associated dependencies
-
-Installation
-------------
-
-- Copy to your nagios plugins directory (possibly /usr/lib/nagios/plugins)
-- Add the following to your checkcommands.cfg:
-
-define command{
-        command_name    check_bl
-        command_line    $USER1$/check_bl -H $HOSTADDRESS$ -B sbl-xbl.spamhaus.or
-g,bl.spamcop.net,t1.dnsbl.net.au
-}
-
-- Alter your services.cfg to include a check against the check_bl command
-
-Variables
----------
-
-check_bl requires the following variables:
-
--H host : Hostname to check
--B blacklist1,blacklist2 : Comma separated list of blacklists to check against
-
-The following optional variable is also available:
-
--c critnum : Number of blacklists the server must be listed in before the status is 'critical'.  By default, any listing is regarded as critical.

check_bl/trunk/nagios-okplugin-mailblacklist.spec

@@ -1,41 +0,0 @@
-%define debug_package %{nil}
-
-Summary:	A Nagios plugin to check SMTP blacklists
-Name:		nagios-okplugin-mailblacklist
-Version:	0.0.1
-Release:	1%{?dist}
-License:	GPLv2+
-Group:		Applications/System
-URL:		http://opensource.ok.is/trac/wiki/Nagios-OKPlugin-MailBlacklist
-Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_bl/releases/%{name}-%{version}.tar.gz
-Requires:	nagios-plugins
-Requires:	nagios-plugins-perl
-BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Packager:	Tomas Edwardsson <tommi@ok.is>
-
-
-%description
-Checks DNS Blacklists for existance of hosts
-
-%prep
-%setup -q
-perl -pi -e "s|/usr/lib|%{_libdir}|g" check_bl
-
-%build
-
-
-%install
-rm -rf %{buildroot}
-install -D -p -m 0755 check_bl %{buildroot}%{_libdir}/nagios/plugins/check_bl
-
-%clean
-rm -rf %{buildroot}
-
-%files
-%defattr(-,root,root,-)
-%doc README COPYING
-%{_libdir}/nagios/plugins/*
-
-%changelog
-* Mon Mar  1 2010  Tomas Edwardsson <tommi@ok.is> 0.1-1
-- Initial packaging

check_bond/nagios-okplugin-bond.spec

@@ -2,8 +2,8 @@
 
 Summary:	A Nagios plugin to check network bond devices
 Name:		nagios-okplugin-bond
-Version:	0.0.1
+Version:	0.0.4
-Release:	2%{?dist}
+Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
 URL:		http://opensource.ok.is/trac/wiki/Nagios-OKPlugin-Bond
@@ -40,6 +40,16 @@ rm -rf %{buildroot}
 %config(noreplace) %{_sysconfdir}/nrpe.d/check_bond.cfg
 
 %changelog
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 0.0.4-1
+- Merge pull request #5 from pallvalmundsson/check_yum_security_patch (palli-
+  github@minor.is)
+
+* Wed Mar 13 2013 Pall Sigurdsson <palli@opensource.is> 0.0.3-1
+- 
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.2-1
+- new package built with tito
+
 * Sun Oct 16 2011  Tomas Edwardsson <tommi@opensource.is> 0.1-2
 - Added configuration into package
 

check_bond/releases/0.0.1/check_bond

@@ -1,125 +0,0 @@
-#!/usr/bin/python
-
-# Copyright 2010, Tomas Edwardsson 
-#
-# check_bond.py is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# check_bond.py is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-import pprint
-import re
-import sys
-import getopt
-
-
-
-def readbond( interface ):
-	intfile = "/proc/net/bonding/%s" % interface
-
-	# Read interface info
-	try:
-		bondfh = open (intfile, 'r')
-	except IOError, (errno, strerror):
-		print "Unable to open bond %s: %s" %  (intfile, strerror)
-		sys.exit(3)
-	except:
-		print "Unexpected error:", sys.exc_info()[0]
-		sys.exit(3)
-
-	# Initialize bond data
-	bond = {}
-	bond['slaves'] = []
-	
-	# Which interface are we working with
-	current_int = ''
-
-	# Loop throught the file contents
-	for line in bondfh.readlines():
-		# Remove newlines and split on colon, ignore other
-		try:
-			k, v = line.replace('\n', '').split(': ', 1)
-		except:
-			pass
-
-		# Remove leading whitespaces
-		k = re.sub('^\s*', '', k)
-		# Bonding mode for the channel
-		if k == "Bonding Mode":
-			bond['bonding_mode'] = v
-		# Record current slave interface
-		elif k == "Slave Interface":
-			current_int = v
-		# Slave interface mii status
-		elif current_int and k == "MII Status":
-			bond['slaves'].append( { 'int' : current_int, 'mii_status' : v })
-		# Bond mii status
-		elif k == "MII Status":
-			bond['mii_status'] = v
-			
-	return bond
-
-def usage():
-    print "Usage: %s -i bond0" % sys.argv[0]
-    sys.exit(3)
-
-def main(argv):
-    # Set variables
-    interface = ''
-    outstring = ''
-    retval = 0
-
-    # Nagios return code states
-    states = { 0 : 'OK', 1 : 'Warning', 2 : 'Critical', 3 : 'Unknown' }
-
-    # Try to read the arguments
-    try:                                
-        opts, args = getopt.getopt(argv, "hi:", ["help", "interface="])
-    except getopt.GetoptError:
-        usage()
-        sys.exit(3)
-
-
-    for opt, arg in opts:
-	if opt in ("-h", "--help"):
-	    usage()
-	    sys.exit(3)
-	elif opt in ("-i", "--interface"):
-	    interface = arg
-
-    if (interface == ""):
-	usage()
-	sys.exit(3)
-
-    bond = readbond(interface)
-
-    # The whole bond is down
-    if bond['mii_status'] != 'up':
-	print "Critical: bonding device %s %s" % (interface, bond['mii_status'])
-	sys.exit(2)
-
-	# Some interface in the bond is down
-	for slave in bond['slaves']:
-		if slave['mii_status'] != 'up':
-			outstring = "%s%s down " % (outstring, slave['int'])
-			if retval < 1:
-				retval = 1
-
-	if retval:
-		print "%s: %s%s %s" % (states[retval], outstring, "in bonding device", interface)
-		sys.exit(retval)
-
-	print "OK: bonding device %s up and running" % interface
-	sys.exit(0)
-
-
-if __name__ == "__main__":
-    main(sys.argv[1:])

check_bond/releases/0.0.1/nagios-okplugin-bond.spec

@@ -1,39 +0,0 @@
-%define debug_package %{nil}
-
-Summary:	A Nagios plugin to check network bond devices
-Name:		nagios-okplugin-bond
-Version:	0.0.1
-Release:	1%{?dist}
-License:	GPLv2+
-Group:		Applications/System
-URL:		http://opensource.ok.is/trac/wiki/Nagios-OKPlugin-Bond
-Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_bond/releases/%{name}-%{version}.tar.gz
-Requires:	nagios-plugins
-BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Packager:	Tomas Edwardsson <tommi@ok.is>
-
-
-%description
-Checks the network bond device on a Linux machine
-
-%prep
-%setup -q
-
-%build
-
-
-%install
-rm -rf %{buildroot}
-install -D -p -m 0755 check_bond %{buildroot}%{_libdir}/nagios/plugins/check_bond
-
-%clean
-rm -rf %{buildroot}
-
-%files
-%defattr(-,root,root,-)
-%doc README
-%{_libdir}/nagios/plugins/*
-
-%changelog
-* Mon Mar  1 2010  Tomas Edwardsson <tommi@ok.is> 0.1-1
-- Initial packaging

check_bond/trunk/README

@@ -1,3 +0,0 @@
-check_bond
-
-Simple Nagios plugin that checks the status of bond devices

check_brocade/nagios-okplugin-brocade.spec

@@ -2,15 +2,15 @@
 
 Summary:	A Nagios plugin to check Brocade devices
 Name:		nagios-okplugin-brocade
-Version:	0.0.3
+Version:	0.0.5
-Release:	1%{?dist}
+Release:	2%{?dist}
 License:	GPLv2+
 Group:		Applications/System
 URL:		http://opensource.ok.is/trac/wiki/Nagios-OKPlugin-Brocade
 Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_brocade/releases/nagios-okplugin-brocade-%{version}.tar.gz
 Requires:	perl-Nagios-Plugin
 BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Packager:	Tomas Edwardsson <tommi@ok.is>
+Packager:	Gardar Thorsteinsson <gardar@ok.is>
 
 
 %description
@@ -20,6 +20,8 @@ Checks Brocade devices
 %setup -q
 perl -pi -e "s|/usr/lib|%{_libdir}|g" check_brocade_env
 
+%global __requires_exclude %{?__requires_exclude:%__requires_exclude}|}^perl\\(utils\\)
+
 %build
 
 
@@ -36,5 +38,14 @@ rm -rf %{buildroot}
 %{_libdir}/nagios/plugins/*
 
 %changelog
+* Fri May 09 2018 Gardar Thorsteinsson <gardar@ok.is> 0.0.5-2
+- filter out perl-utils dep
+
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 0.0.5-1
+- 
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.4-1
+- new package built with tito
+
 * Mon Nov 21 2010  Tomas Edwardsson <tommi@ok.is> 0.0.3-1
 - Initial packaging

check_cifs/check_cifs

@@ -23,7 +23,7 @@ use Nagios::Plugin;
 # Create the Nagios plugin object
 my $np = Nagios::Plugin->new(
         usage => "Usage: %s -H <hostname> -u <username> -p <password> -s <share>",
-        version => "0.01",
+        version => "1.0",
 );
 
 # Add valid arguments

check_cifs/nagios-okplugin-cifs.spec

@@ -2,8 +2,8 @@
 
 Summary:	A Nagios plugin to check CIFS shares
 Name:		nagios-okplugin-cifs
-Version:	0.0.3
+Version:	1.1
-Release:	1%{?dist}
+Release:	2%{?dist}
 License:	GPLv2+
 Group:		Applications/System
 URL:		http://opensource.ok.is/trac/wiki/Nagios-OKPlugin-Brocade
@@ -11,7 +11,8 @@ Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_cifs/releases
 Requires:	perl-Nagios-Plugin
 Requires:	samba-client, krb5-workstation
 BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Packager:	Tomas Edwardsson <tommi@ok.is>
+Packager: Gardar Thorsteinsson <gardar@ok.is>	
+BuildArch:	noarch
 
 
 %description
@@ -22,6 +23,8 @@ NTML authentication
 %setup -q
 perl -pi -e "s|/usr/lib|%{_libdir}|g" check_cifs
 
+%global __requires_exclude %{?__requires_exclude:%__requires_exclude}|}^perl\\(utils\\)
+
 %build
 
 
@@ -38,5 +41,18 @@ rm -rf %{buildroot}
 %{_libdir}/nagios/plugins/*
 
 %changelog
+* Fri May 09 2018 Gardar Thorsteinsson <gardar@ok.is> 1.1-2
+- Filter out perl-utils dep
+
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 1.1-1
+- Merge github.com:opinkerfi/misc (palli@opensource.is)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.0-1
+- version number of scripts bumped (palli@opensource.is)
+- Updates buildarch to noarch (tommi@tommi.org)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.4-1
+- new package built with tito
+
 * Mon Nov 21 2010  Tomas Edwardsson <tommi@ok.is> 0.0.3-1
 - Initial packaging

check_cpu.py/nagios-okplugin-check_cpu.spec

@@ -0,0 +1,59 @@
+%define debug_package %{nil}
+
+Summary:	A Nagios plugin to check CPU on Linux servers
+Name:		nagios-okplugin-check_cpu
+Version:	1.1
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		https://github.com/opinkerfi/nagios-plugins/
+Source0:	https://github.com/opinkerfi/nagios-plugins/archive/%{name}-%{version}-%{release}.tar.gz
+Requires:	nagios-okplugin-common
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Tomas Edwardsson <tommi@tommi.org>
+BuildArch:	noarch
+
+%description
+Check cpu states on line machines
+
+%prep
+%setup -q
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 okplugin_check_cpu %{buildroot}%{_libdir}/nagios/plugins/okplugin_check_cpu
+install -D -p -m 0755 nrpe.d/okplugin_check_cpu.cfg %{buildroot}/etc/nrpe.d/okplugin_check_cpu.cfg
+
+
+%clean
+rm -rf %{buildroot}
+
+%post
+/sbin/service nrpe reload
+
+%files
+%defattr(-,root,root,-)
+%{_libdir}/nagios/plugins/*
+%{_sysconfdir}/nrpe.d/*
+
+
+
+%changelog
+* Mon Jan 20 2014 Tomas Edwardsson <tommi@tommi.org> 1.1-1
+- new package built with tito
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.0-1
+- Version number bumped
+- Updates buildarch to noarch (tommi@tommi.org)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.3-1
+- new package built with tito
+
+* Thu Nov 25 2010  Pall Sigurdsson <palli@opensource.is> 0.1-2
+- Nrpe config now ships with plugin by default
+* Mon Mar  1 2010  Tomas Edwardsson <tommi@ok.is> 0.1-1
+- Initial packaging
+

check_cpu.py/nrpe.d/okplugin_check_cpu.cfg

@@ -0,0 +1 @@
+command[okplugin_check_cpu]=/usr/lib/nagios/plugins/okplugin_check_cpu

check_cpu.py/okplugin_check_cpu

@@ -0,0 +1,131 @@
+#!/usr/bin/python
+#
+# Copyright 2014, Tomas Edwardsson
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+"""
+Gathers information on cpu usage on a linux machine
+
+It returns performance data for both the last 5 seconds and from last run.
+"""
+
+from pynag.Plugins import PluginHelper, ok, unknown
+import os
+import time
+
+
+def main():
+    """The main logic of the program"""
+
+    # See man proc and search for /proc/stat
+    stat_fields = ['cpu', 'user', 'nice', 'system', 'idle', 'iowait', 'irq',
+                   'softirq', 'steal', 'guest', 'guest_nice']
+
+    pyplug = PluginHelper()
+
+    # Get the statistics from last run
+    old_stat = get_saved_stat()
+
+    # Get current state
+    stat = get_stat()
+
+    # Resample
+    time.sleep(5)
+    stat2 = get_stat()
+
+    try:
+        save_stat(stat)
+    except IOError, err:
+        pyplug.exit(unknown, "Unable to save cpu statistics: %s" % err)
+
+
+    # Calculate averages for the last few seconds
+    current_averages = diff_stats(stat2, stat)
+    for pos in range(len(current_averages)):
+        pyplug.add_metric(label=stat_fields[pos+1],
+                          value=current_averages[pos],
+                          uom="%")
+
+    # Calculate averages from last run
+    if old_stat:
+        last_run_avg = diff_stats(old_stat, stat)
+        for pos in range(len(current_averages)):
+            pyplug.add_metric(label=stat_fields[pos+1]+"_avg",
+                              value=last_run_avg[pos],
+                              uom="%")
+
+    pyplug.add_status(ok)
+    pyplug.add_summary("CPU load %.2f%%" % (100.0 - current_averages[3]))
+    pyplug.exit()
+
+def diff_stats(older, newer):
+    """Calculates the percentage between two stat arrays"""
+    if older:
+        diff = []
+        for pos in range(len(newer)):
+            diff.append(newer[pos] - older[pos])
+        averages =  calc_avg(diff)
+    else:
+        averages =  calc_avg(newer)
+
+    return averages
+
+
+def remove_stale_state():
+    """Removes the last state file if we have rebooted"""
+
+    try:
+        state_mtime = os.stat("/var/lib/nagios-okplugin/check_cpu").st_mtime
+        boot_time = os.stat("/proc/1").st_mtime
+        if state_mtime < boot_time:
+            os.unlink("/var/lib/nagios-okplugin/check_cpu")
+    except OSError:
+        return None
+
+    return state_mtime
+
+def calc_avg(stat):
+    """Calculates the average of each int in array"""
+    stat_sum = sum(stat)
+    avg = []
+    for pos in range(len(stat)):
+        avg.append(float(stat[pos]) / stat_sum * 100)
+    return avg
+
+def get_stat():
+    """Fetches the first line from /proc/stat and returns the numbers"""
+    stat_fh = open("/proc/stat")
+    return [int(pos) for pos in stat_fh.readline().split()[1:]]
+
+def get_saved_stat():
+    """Fetches information about the last run to be able to do averages"""
+
+    remove_stale_state()
+    try:
+        stat_fh = open("/var/lib/nagios-okplugin/check_cpu")
+    except IOError:
+        return None
+    return [int(pos) for pos in stat_fh.readline().split()[1:]]
+
+def save_stat(stat):
+    """Save statistics to compare to in next run"""
+    stat_fh = open("/var/lib/nagios-okplugin/check_cpu", "w")
+
+    stat_fh.write("cpu " + " ".join([str(pos) for pos in stat]) + "\n")
+    stat_fh.close()
+
+if __name__ == "__main__":
+    main()
+
+# vim: sts=4 expandtab

check_cpu.sh/check_cpu.sh

@@ -167,6 +167,11 @@ must be lower than the critical level!"
         exit $ST_UK
     fi
 fi
+which bc >> /dev/null
+if [ $? -gt 0 ]; then
+	echo "UNKNOWN - command 'bc' not found in path. Exiting..."
+	exit 3
+fi
 
 get_cpuvals
 do_output

check_cpu.sh/nagios-plugins-check_cpu.spec

@@ -2,15 +2,16 @@
 
 Summary:	A Nagios plugin to check CPU on Linux servers
 Name:		nagios-plugins-check_cpu
-Version:	0.2
+Version:	2
 Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
 URL:		http://www.matejunkie.com/cpu-check-plugin-for-nagios/
 Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_cpu/releases/nagios-plugins-check_cpu-%{version}.tar.gz
-Requires:	nrpe
+Requires:	nrpe bc
 BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
 Packager:	Tomas Edwardsson <tommi@ok.is>
+BuildArch:	noarch
 
 %description
 This shell script checks cpu utilization (user,system,iowait,idle in %) 
@@ -33,6 +34,9 @@ install -D -p -m 0755 nrpe.d/check_cpu.cfg %{buildroot}/etc/nrpe.d/check_cpu.cfg
 %clean
 rm -rf %{buildroot}
 
+%post
+/sbin/service nrpe reload
+
 %files
 %defattr(-,root,root,-)
 #%doc README LICENSE
@@ -41,6 +45,18 @@ rm -rf %{buildroot}
 
 
 %changelog
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 2-1
+- Added nrpe reload to post section (tommi@tommi.org)
+- Merge github.com:opinkerfi/misc (palli@opensource.is)
+- Added dependency on bc (palli@opensource.is)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.0-1
+- Version number bumped
+- Updates buildarch to noarch (tommi@tommi.org)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.3-1
+- new package built with tito
+
 * Thu Nov 25 2010  Pall Sigurdsson <palli@opensource.is> 0.1-2
 - Nrpe config now ships with plugin by default
 * Mon Mar  1 2010  Tomas Edwardsson <tommi@ok.is> 0.1-1

check_dataprotector/check_dp_tablespace

@@ -64,7 +64,6 @@ def check_tablespaces():
 		global default_warning_threshold
 		global nagios_status
 		warn = default_warning_threshold
-		warn = 60
 		max_size = i['max_size'] * 1024
 		curr_size = i['curr_size'] * 1024
 		occupancy = 100.0 * curr_size / max_size 

check_dataprotector/nagios-okplugin-check_dataprotector.spec

@@ -2,7 +2,7 @@
 
 Summary:	Nagios Plugins to monitor HP Dataprotector
 Name:		nagios-okplugin-check_dataprotector
-Version:	AUTOVERSION
+Version:	2
 Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
@@ -45,5 +45,12 @@ rm -rf %{buildroot}
 /etc/nrpe.d/check_dataprotector.cfg
 
 %changelog
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 2-1
+- removed warning threshold of 60 (palli@opensource.is)
+- contrib removed from plugin path (palli@opensource.is)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 1.0.1-1
+- new package built with tito
+
 * Mon Sep  15 2010  Pall Sigurdsson <palli@opensource.is> 0.1-1
 - Initial packaging

check_dataprotector/nrpe.d/check_dataprotector.cfg

@@ -0,0 +1,8 @@
+
+
+command[check_dp_pool]=/usr/lib/nagios/plugins/check_dp_pool "$ARG1$"
+command[check_dp_tablespace]=/usr/lib/nagios/plugins/check_dp_tablespace
+command[check_dp_services]=/usr/lib/nagios/plugins/check_dp_services
+command[check_dp_mountrequest]=/usr/lib/nagios/plugins/check_dp_mountrequest
+command[check_dp_idb]=/usr/lib/nagios/plugins/check_dp_idb
+command[check_dp_backups]=/usr/lib/nagios/plugins/check_dp_backups

check_dataprotector/trunk/nrpe.d/check_dataprotector.cfg

@@ -1,7 +0,0 @@
-
-
-command[check_dp_pool]=/usr/lib/nagios/plugins/contrib/check_dp_pool "$ARG1$"
-command[check_dp_tablespace]=/usr/lib/nagios/plugins/contrib/check_dp_tablespace
-command[check_dp_services]=/usr/lib/nagios/plugins/contrib/check_dp_services
-command[check_dp_mountrequest]=/usr/lib/nagios/plugins/contrib/check_dp_mountrequest
-command[check_dp_idb]=/usr/lib/nagios/plugins/contrib/check_dp_idb

check_disks.pl/check_disks.pl

@@ -24,6 +24,7 @@
      -h | --help     : Display this help
      -w | --warning  : % free space to send warning alert (default 10)
      -c | --critical : % free space to send critical alert (default 5)
+     -I | --inodes  : Check for inodes
      -H | --host     : host you want to check by NRPE (default localhost)
      -u | --user     : user for NRPE connection (default nagios)
      -i | --ignore   : Filesystem you want to ignore
@@ -94,6 +95,9 @@ not be used.
 
     $Log: check_disk.pl,v $
 
+    Revision 1.10 2013/03/01 14:28:00 tryggvi@ok.is
+    o Added support for inodes
+
     Revision 1.9 2010/02/27 00:55:00   palli@ok.is
     o Changed UNKNOWN return code from -1 to 3
     o Modified to use check_nrpe instead of ssh
@@ -129,7 +133,7 @@ use Pod::Usage;
 use strict;
 
 my ($opt_c, $opt_w, $opt_h, $opt_i,$opt_f,$opt_s,$opt_u,$opt_H,$opt_C,$opt_v,
-    $opt_html, $opt_srvperf, $opt_r, $opt_R);
+    $opt_html, $opt_srvperf, $opt_r, $opt_R, $opt_inodes);
 
 $ENV{'PATH'} = "/usr/lib/nagios/plugins:/usr/lib64/nagios/plugins:/usr/local/libexec:/usr/libexec:/usr/local/nagios/libexec";
 
@@ -140,12 +144,13 @@ $opt_c = "5";       # Valeur par defaut de critical
 $opt_H = "localhost";
 $opt_R = q/^$/;
 $opt_r = "";
+my $cmd = "/bin/df -k";
+my $multiply = 1024; # For bytes
 
 my $exclude_re = "(^//|^none)";
 
 my %alldisks; # Tous les disques trouves avec la commande df
 my %checkdisks; # seulement les disque a verifier
-my $cmd = "/bin/df -k";
 my $output ;
 my $retour = 'OK';
 my %EXIT_CODES = (
@@ -168,6 +173,7 @@ GetOptions(
         "i=s" => \$opt_i,   "ignore=s"            => \$opt_i,
         "f=s" => \$opt_f,   "filesystem=s"        => \$opt_f,
         "C=s" => \$opt_C,   "conf=s"              => \$opt_C,
+        "I" => \$opt_inodes,   "inodes"              => \$opt_inodes,
         "v"   => \$opt_v,   "verbose"             => \$opt_v,
         "r=s" => \$opt_r,   "R=s"                 => \$opt_R,
         "html"   => \$opt_html,
@@ -197,26 +203,37 @@ my $args;
 #           ->{critical} : taux critique en % espace libre
 #
 
+if(defined($opt_inodes)){
+    # Using -i for inodes
+    $cmd = "/bin/df -i";
+    $multiply = 1000;
+}
+
 #Si on est en local inutile de faire du nrpe
 if($opt_H ne "localhost" and $opt_H ne "127.0.0.1") {
     #$cmd = "ssh $opt_u\@$opt_H '$cmd'";
-    $cmd = "check_nrpe -H $opt_H -c get_disks";
+    if(defined($opt_inodes)){
+        $cmd = "check_nrpe -H $opt_H -c get_disks_inodes";
+    } else {
+        $cmd = "check_nrpe -H $opt_H -c get_disks";
+    }
     #$cmd = "cat /tmp/df";
     #print "$cmd";
 }
 
 # Envoi commande et renseignement Hashage %disks
 my @output = `$cmd`;
+
 my $ret = $?;
+$ret >>= 8;
 
 if ($ret == -1) {
 	print "Could not find " . (split(' ', $cmd))[0] . "\n";
 	exit $EXIT_CODES{'UNKNOWN'};
 }
 
-$ret >>= 8;
 # 2010/02/25 palli@ok.is : Check if $cmd ran successfully
-if ($ret > 0) {
+if ($ret > 1) {
    print "Failed to execute $cmd: " . join("\n", @output) . "\n";
    exit $EXIT_CODES{'UNKNOWN'} ;
 }
@@ -234,16 +251,16 @@ if ($ret > 0) {
 #
 
 foreach my $l (@output) {
+    next if ($l =~ m/$opt_R/);
+    next if ($l !~ m/$opt_r/);
+    next if ($l =~ m/$exclude_re/);
     if($l =~ /(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\%\s+([\/\w\d\.-]+)$/) {
-        next if ($l =~ m/$opt_R/);
-        next if ($l !~ m/$opt_r/);
-        next if ($l =~ m/$exclude_re/);
         my ($s,$u,$f,$pu,$d) = ($1,$2,$3,$4,$5);
         $alldisks{$d}->{pused} = $pu;
         $alldisks{$d}->{pfree} = 100-$pu;
-        $alldisks{$d}->{somme} = $s*1024;
+        $alldisks{$d}->{somme} = $s*$multiply;
-        $alldisks{$d}->{used} = $u*1024;
+        $alldisks{$d}->{used} = $u*$multiply;
-        $alldisks{$d}->{free} = $f*1024;
+        $alldisks{$d}->{free} = $f*$multiply;
 
         # par defaut on prend les taux Warn et Crit specifies
         updateRates($d,$opt_w,$opt_c,$alldisks{$d}->{somme});
@@ -251,16 +268,16 @@ foreach my $l (@output) {
 # This is the output of df.exe on Windows
 #C:\    9097126      6094081      3003045    67% argon-c (ntfs)
     else {
-	if ($l =~ /(\w)\:\\\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\%\s+(.*)$/) {
         next if ($l =~ m/$opt_R/);
         next if ($l !~ m/$opt_r/);
         next if ($l =~ m/$exclude_re/);
+	if ($l =~ /(\w)\:\\\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\%\s+(.*)$/) {
         my ($d,$s,$u,$f,$pu) = ("/$1",$2,$3,$4,$5);
         $alldisks{$d}->{pused} = $pu;
         $alldisks{$d}->{pfree} = 100-$pu;
-        $alldisks{$d}->{somme} = $s*1024;
+        $alldisks{$d}->{somme} = $s*$multiply;
-        $alldisks{$d}->{used} = $u*1024;
+        $alldisks{$d}->{used} = $u*$multiply;
-        $alldisks{$d}->{free} = $f*1024;
+        $alldisks{$d}->{free} = $f*$multiply;
 	#print $l;
 	#print "pused = $pu\n";
 	#print "pfree = 100-$pu\n";
@@ -307,7 +324,7 @@ if($opt_f) {
             if(defined($alldisks{$f})) {
                 $checkdisks{$f}=$alldisks{$f};
             }
-        } elsif ($f =~ /([\/\w\d]+)\:(\w+)\:(\w+)/) {
+        } elsif ($f =~ /^(.+?)\:(\w+)\:(\w+)/) {
             if(defined($alldisks{$1})) {
                 $checkdisks{$1}=$alldisks{$1};
                 updateRates($1,$2,$3,$checkdisks{$1}->{somme});
@@ -437,14 +454,15 @@ sub byte2percent {
         print "Erreur : unite inconnue ($unit)\n";
         return 0;
     }
+
     if($unit eq 'K') {
-        $return = sprintf("%d",100*(1024*$value)/$max);
+        $return = sprintf("%d",100*($multiply*$value)/$max);
     } elsif ($unit eq 'M') {
-        $return = sprintf("%d",100*(1024*1024*$value)/$max);
+        $return = sprintf("%d",100*($multiply*$multiply*$value)/$max);
     } elsif ($unit eq 'G') {
-        $return = sprintf("%d",100*(1024*1024*1024*$value)/$max);
+        $return = sprintf("%d",100*($multiply*$multiply*$multiply*$value)/$max);
     } elsif ($unit eq 'T') {
-        $return = sprintf("%d",100*(1024*1024*1024*1024*$value)/$max);
+        $return = sprintf("%d",100*($multiply*$multiply*$multiply*$multiply*$value)/$max);
     }
     #Borne a 100 %
     if($return > 100) { 
@@ -459,8 +477,8 @@ sub byte2human {
 
     my @units = qw/B K M G T/;
 
-    while (($value / 1024) >= 1) {
+    while (($value / $multiply) >= 1) {
-	$value /= 1024;
+	$value /= $multiply;
 	$i++;
     }
     return sprintf('%.1f%s',$value, $units[$i]);

check_disks.pl/nagios-okplugin-check_disks.spec

@@ -2,8 +2,8 @@
 
 Summary:	A Nagios plugin to check disks via NRPE
 Name:		nagios-okplugin-check_disks
-Version:	AUTOVERSION
+Version:	1.0.7
-Release:	2%{?dist}
+Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
 URL:		http://opensource.is/trac/wiki/check_disks
@@ -40,6 +40,29 @@ rm -rf %{buildroot}
 %{_libdir}/nagios/plugins/check_disks.pl
 
 %changelog
+* Wed Oct 29 2014 Tomas Edwardsson <tommi@tommi.org> 1.0.7-1
+- Fix invalid regex if mountpoint has . in path (tommi@tommi.org)
+- Regex filtering broke disk checks (tommi@tommi.org)
+
+* Tue Mar 25 2014 Tomas Edwardsson <tommi@tommi.org> 1.0.6-1
+- Bumped version
+
+* Tue Mar 25 2014 Tomas Edwardsson <tommi@tommi.org> 1.0.5-1
+- Added support for inodes (tryggvi@linux.is)
+
+* Sat Mar 02 2013 Tryggvi Farestveit <tryggvi@linux.is> 1.0.4-1
+- Added support for inodes
+
+* Wed May 16 2012 Tomas Edwardsson <tommi@tommi.org> 1.0.3-1
+- Updated version of nagios-okplugin-check_disks (tommi@tommi.org)
+- Issue #56, temporary fix for selinux and disk checks (tommi@tommi.org)
+
+* Mon May 16 2012 Tomas Edwardsson <tommi@opensource.is> 1.0.2-1
+- Ignore warning states from nrpe
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 1.0.1-1
+- new package built with tito
+
 * Sun Oct 16 2011  Tomas Edwardsson <tommi@opensource.is> 0.1-2
 - Fixed dependencies and build arch
 

check_drbd/nagios-okplugin-check_drbd.spec

@@ -0,0 +1,59 @@
+%define debug_package %{nil}
+
+%define plugin_name	check_drbd
+
+
+Summary:	A Nagios plugin to check Linux Devicemapper Multipathing
+Name:		nagios-okplugin-%{plugin_name}
+Version:	0.0.4
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		http://opensource.is/trac/wiki/%{plugin_name}
+Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/%{plugin_name}/releases/%{name}-%{version}.tar.gz
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Pall Sigurdsson <palli@opensource.is>
+
+
+%description
+%{summary}
+
+%prep
+%setup -q
+perl -pi -e "s|/usr/lib|%{_libdir}|g" nrpe.d/%{plugin_name}.cfg
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 check_drbd %{buildroot}%{_libdir}/nagios/plugins/check_drbd
+install -D -p -m 0755 nrpe.d/%{plugin_name}.cfg %{buildroot}/etc/nrpe.d/%{plugin_name}.cfg
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+#%doc README LICENSE
+%{_libdir}/nagios/plugins/*
+/etc/nrpe.d/%{plugin_name}.cfg
+
+%changelog
+* Wed Mar 14 2012 Pall Sigurdsson <palli@opensource.is> 0.0.4-1
+- licence and readme removed from specfile (palli@opensource.is)
+
+* Wed Mar 14 2012 Pall Sigurdsson <palli@opensource.is>
+- licence and readme removed from specfile (palli@opensource.is)
+
+* Wed Mar 14 2012 Pall Sigurdsson <palli@opensource.is>
+- licence and readme removed from specfile (palli@opensource.is)
+
+* Wed Mar 14 2012 Pall Sigurdsson <palli@opensource.is>
+- licence and readme removed from specfile (palli@opensource.is)
+
+* Wed Mar 14 2012 Pall Sigurdsson <palli@opensource.is> 0.0.3-1
+- new package built with tito
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.2-1
+- new package built with tito

check_emc_clariion/check_emc_clariion.pl

@@ -288,7 +288,7 @@ sub check_disk {
 	}
 	close (NAVICLIOUT);
 	if ($disk_ok_count eq 0) {
-		print "No disk were founded !\n";
+		print "No disk were found !\n";
 		$state = 'UNKNOWN';
 	} elsif ($crit_count > 0) {
 		$state='CRITICAL';

check_eva/check_eva.py

@@ -0,0 +1,767 @@
+#!/usr/bin/python
+#
+# Copyright 2010, Pall Sigurdsson <palli@opensource.is>
+#
+# check_eva.py is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# check_eva.py is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# About this script
+#
+# This script will check the status of all EVA arrays via the sssu binary.
+# You will need the sssu binary in path (/usr/bin/sssu is a good place)
+# If you do not have sssu, check your commandview CD, it should have both
+# binaries for Windows and Linux
+
+
+# Some Defaults
+show_perfdata = True
+show_longserviceoutput = True
+debugging = False
+
+
+# check_eva defaults
+hostname = "localhost"
+username = "eva"
+password = "eva1234"
+mode = "check_systems"
+path = ''
+nagios_server = "94.142.154.10"
+nagios_port = 80
+nagios_myhostname = None
+do_phone_home = False
+escape_newlines = False
+check_system = None  # By default check all systems
+proxyserver = None
+timeout = 0  # 0 means no timeout
+
+
+# set to true, if you do not have sssu binary handy
+server_side_troubleshooting = False
+
+# No real need to change anything below here
+version = "1.0.1"
+ok = 0
+warning = 1
+critical = 2
+unknown = 3
+not_present = -1
+
+
+state = {}
+state[not_present] = "Not Present"
+state[ok] = "OK"
+state[warning] = "Warning"
+state[critical] = "Critical"
+state[unknown] = "Unknown"
+
+longserviceoutput = "\n"
+perfdata = ""
+
+valid_modes = ("check_systems", "check_controllers", "check_diskgroups",
+               "check_disks", "check_diskshelfs", "check_diskshelves")
+
+from sys import exit
+from sys import argv
+from os import getenv, environ
+import signal
+import subprocess
+import xmlrpclib
+import httplib
+
+# we need to set socket default timeout in case we are using the phone-home part
+import socket
+socket.setdefaulttimeout(5)
+
+
+def print_help():
+    print "check_eva version %s" % version
+    print "This plugin checks HP EVA Array with the sssu command"
+    print ""
+    print "Usage: %s [OPTIONS]" % argv[0]
+    print "OPTIONS:"
+    print " [--host <host>]"
+    print " [--username <user>]"
+    print " [--password <password]"
+    print " [--path </path/to/sssu>]"
+    print " [--mode <mode>] "
+    print " [--test]"
+    print " [--timeout <timeout>]"
+    print " [--debug]"
+    print " [--help]"
+    print ""
+    print " Valid modes are: %s" % ', '.join(valid_modes)
+    print ""
+    print "Example: %s --host commandview.example.net --username eva --password myPassword --mode check_systems" % (argv[0])
+
+
+def error(errortext):
+    print "* Error: %s" % errortext
+    print_help()
+    print "* Error: %s" % errortext
+    exit(unknown)
+
+
+def debug(debugtext):
+    global debugging
+    if debugging:
+        print debugtext
+
+# parse arguments
+
+arguments = argv[1:]
+while len(arguments) > 0:
+    arg = arguments.pop(0)
+    if arg == 'invalid':
+        pass
+    elif arg == '-H' or arg == '--host':
+        hostname = arguments.pop(0)
+    elif arg == '-U' or arg == '--username':
+        username = arguments.pop(0)
+    elif arg == '-P' or arg == '--password':
+        password = arguments.pop(0)
+    elif arg == '-T' or arg == '--test':
+        testmode = 1
+    elif arg == '--timeout':
+        timeout = int(arguments.pop(0))
+    elif arg == '--path':
+        path = arguments.pop(0) + '/'
+    elif arg == '-M' or arg == '--mode':
+        mode = arguments.pop(0)
+        if mode not in valid_modes:
+            error("Invalid --mode %s" % arg)
+    elif arg == '-d' or arg == '--debug':
+        debugging = True
+    elif arg == '--longserviceoutput':
+        show_longserviceoutput = True
+    elif arg == '--no-longserviceoutput':
+        show_longserviceoutput = False
+    elif arg == '--perfdata':
+        show_perfdata = True
+    elif arg == '--no-perfdata':
+        show_perfdata = False
+    elif arg == '--nagios_myhostname':
+        nagios_myhostname = arguments.pop(0)
+    elif arg == '--nagios_server':
+        nagios_server = arguments.pop(0)
+    elif arg == '--nagios_port':
+        nagios_port = arguments.pop(0)
+    elif arg == '--system':
+        check_system = arguments.pop(0)
+    elif arg == '--phone-home':
+        do_phone_home = True
+    elif arg == '--proxy':
+        proxyserver = arguments.pop(0)
+    elif arg == '--escape-newlines':
+        escape_newlines = True
+    elif arg == '-h' or arg == '--help':
+        print_help()
+        exit(ok)
+    else:
+        error("Invalid argument %s" % arg)
+
+
+subitems = {}
+subitems['fan'] = 'fans'
+subitems['source'] = 'powersources'
+subitems['hostport'] = 'hostports'
+subitems['module'] = 'modules'
+subitems['sensor'] = 'sensors'
+subitems['powersupply'] = 'powersupplies'
+subitems['bus'] = 'communicationbuses'
+subitems['port'] = 'fibrechannelports'
+
+
+def runCommand(command):
+    """ runCommand: Runs command from the shell prompt. Exit Nagios style if unsuccessful """
+    proc = subprocess.Popen(
+        command, shell=True, stdout=subprocess.PIPE, stderr=subprocess.PIPE,)
+    stdout, stderr = proc.communicate('through stdin to stdout')
+    if proc.returncode > 0:
+        print "Error %s: %s\n command was: '%s'" % (proc.returncode, stderr.strip(), command)
+        # File not found, lets print path
+        if proc.returncode == 127 or proc.returncode == 1:
+            path = getenv("PATH")
+            print "Current Path: %s" % path
+            exit(unknown)
+    else:
+        return stdout
+
+
+def run_sssu(system=None, command="ls system full"):
+    """Runs the sssu command. This one is responsible for error checking from sssu"""
+    commands = []
+
+    continue_on_error = "set option on_error=continue"
+    login = "select manager %s USERNAME=%s PASSWORD=%s" % (
+        hostname, username, password)
+
+    commands.append(continue_on_error)
+    commands.append(login)
+    if system is not None:
+        commands.append('select SYSTEM "%s"' % system)
+    commands.append(command)
+
+    commandstring = "sssu "
+    for i in commands:
+        commandstring += '"%s" ' % i
+    global server_side_troubleshooting
+    if server_side_troubleshooting == True:
+        commandstring = 'cat "debug/%s"' % command
+
+    # print mystring
+    # if command == "ls system full":
+    #	output = runCommand("cat sssu.out")
+    # elif command == "ls disk_groups full":
+    #	output = runCommand("cat ls_disk*")
+    # elif command == "ls controller full":
+    #	output = runCommand("cat ls_controller")
+    # else:
+    #	print "What command is this?", command
+    #	exit(unknown)
+    output = runCommand(commandstring)
+    debug(commandstring)
+
+    output = output.split('\n')
+
+    # Lets process the top few results from the sssu command. Make sure the
+    # results make sense
+    error = 0
+    if output.pop(0).strip() != '':
+        error = 1
+    if output.pop(0).strip() != '':
+        error = 2
+    if output.pop(0).strip().find('SSSU for HP') != 0:
+        error = 3
+    if output.pop(0).strip().find('Version:') != 0:
+        error = 4
+    if output.pop(0).strip().find('Build:') != 0:
+        error = 5
+    if output.pop(0).strip().find('NoSystemSelected> ') != 0:
+        error = 6
+    #if output.pop(0).strip() != '': error = 1
+    #if output.pop(0).strip().find('NoSystemSelected> ') != 0: error=1
+    #if output.pop(0).strip() != '': error = 1
+    str_buffer = ""
+    for i in output:
+        str_buffer = str_buffer + i + "\n"
+        if i.find('Error') > -1:
+            print "This is the command i was trying to execute: %s" % i
+            error = 1
+        if i.find('information:') > 0:
+            break
+    if error > 0:
+        print "Error running the sssu command: " + str(error)
+        print commandstring
+        print str_buffer
+        exit(unknown)
+    objects = []
+    current_object = None
+    for line in output:
+        if len(line) == 0:
+            continue
+        line = line.strip()
+        tmp = line.split()
+        if len(tmp) == 0:
+            if current_object:
+                if not current_object['master'] in objects:
+                    objects.append(current_object['master'])
+                current_object = None
+            continue
+        key = tmp[0].strip()
+        if current_object and not current_object['master'] in objects:
+            objects.append(current_object['master'])
+        if key == 'object':
+            current_object = {}
+            current_object['master'] = current_object
+        if key == 'controllertemperaturestatus':
+            current_object = current_object['master']
+        if key == 'iomodules':
+            key = 'modules'
+        # if key in subitems.values():
+        #	object['master'][key] = []
+        if key in subitems.keys():
+            mastergroup = subitems[key]
+            master = current_object['master']
+            current_object = {}
+            current_object['object_type'] = key
+            current_object['master'] = master
+            if not current_object['master'].has_key(mastergroup):
+                current_object['master'][mastergroup] = []
+            current_object['master'][mastergroup].append(current_object)
+
+        if line.find('.:') > 0:
+            # We work on first come, first serve basis, so if
+            # we accidentally see same key again, we will ignore
+            if not current_object.has_key(key):
+                value = ' '.join(tmp[2:]).strip()
+                current_object[key] = value
+    # Check if we were instructed to check only one eva system
+    global check_system
+    if command == "ls system full" and check_system is not None:
+        tmp_objects = []
+        for i in objects:
+            if i['objectname'] == check_system:
+                tmp_objects.append(i)
+        objects = tmp_objects
+    return objects
+
+
+def end(summary, perfdata, longserviceoutput, nagios_state):
+    global show_longserviceoutput
+    global show_perfdata
+    global nagios_server
+    global do_phone_home
+    global nagios_port
+    global nagios_myhostname
+    global hostname
+    global mode
+    global escape_newlines
+    global check_system
+
+    message = "%s - %s" % (state[nagios_state], summary)
+    if show_perfdata:
+        message = "%s | %s" % (message, perfdata)
+    if show_longserviceoutput:
+        message = "%s\n%s" % (message, longserviceoutput.strip())
+    if escape_newlines == True:
+        lines = message.split('\n')
+        message = '\\n'.join(lines)
+    debug("do_phone_home = %s" % do_phone_home)
+    if do_phone_home == True:
+        try:
+            if nagios_myhostname is None:
+                if environ.has_key('HOSTNAME'):
+                    nagios_myhostname = environ['HOSTNAME']
+                elif environ.has_key('COMPUTERNAME'):
+                    nagios_myhostname = environ['COMPUTERNAME']
+                else:
+                    nagios_myhostname = hostname
+            try:
+                phone_home(nagios_server,
+                           nagios_port,
+                           status=nagios_state,
+                           message=message,
+                           hostname=nagios_myhostname,
+                           servicename=mode,
+                           system=check_system
+                           )
+            except Exception:
+                pass
+
+        except:
+            raise
+    print message
+    exit(nagios_state)
+
+
+class ProxiedTransport(xmlrpclib.Transport):
+
+    def set_proxy(self, proxy):
+        self.proxy = proxy
+
+    def make_connection(self, host):
+        self.realhost = host
+        h = httplib.HTTP(self.proxy)
+        return h
+
+    def send_request(self, connection, handler, request_body):
+        connection.putrequest("POST", 'http://%s%s' % (self.realhost, handler))
+
+    def send_host(self, connection, host):
+        connection.putheader('Host', self.realhost)
+
+
+def phone_home(nagios_server, nagios_port, status, message, hostname=None, servicename=None, system=None):
+    """phone_home: Sends results to remote nagios server via python xml-rpc"""
+    debug("phoning home: %s" % servicename)
+    if system is not None:
+        servicename = str(servicename) + str(system)
+    uri = "http://%s:%s" % (nagios_server, nagios_port)
+
+    global proxyserver
+    if proxyserver is not None:
+        p = ProxiedTransport()
+        p.set_proxy(proxyserver)
+        s = xmlrpclib.Server(uri, transport=p)
+    else:
+        s = xmlrpclib.ServerProxy(uri)
+    s.nagiosupdate(hostname, servicename, status, message)
+    return 0
+
+
+def check_systems():
+    summary = ""
+    perfdata = ""
+    # longserviceoutput="\n"
+    nagios_state = ok
+    objects = run_sssu()
+    for i in objects:
+        name = i['objectname']
+        operationalstate = i['operationalstate']
+        # Lets see if this array is working
+        if operationalstate != 'good':
+            nagios_state = max(nagios_state, warning)
+        # Lets add to the summary
+        summary += " %s=%s " % (name, operationalstate)
+        # Collect the performance data
+        interesting_perfdata = 'totalstoragespace|usedstoragespace|availablestoragespace'
+        perfdata += get_perfdata(
+            i, interesting_perfdata.split('|'), identifier="%s_" % name)
+        # Collect extra info for longserviceoutput
+        longoutput("%s = %s (%s)\n" %
+                   (i['objectname'], i['operationalstate'], i['operationalstatedetail']))
+        interesting_fields = 'licensestate|systemtype|firmwareversion|nscfwversion|totalstoragespace|usedstoragespace|availablestoragespace'
+        for x in interesting_fields.split('|'):
+            longoutput("- %s = %s \n" % (x, i[x]))
+        longoutput("\n")
+    end(summary, perfdata, longserviceoutput, nagios_state)
+
+
+def get_perfdata(my_object, interesting_fields, identifier=""):
+    perfdata = ""
+    for i in interesting_fields:
+        if i == '':
+            continue
+        perfdata += "'%s%s'=%s " % (identifier, i, my_object[i])
+    return perfdata
+
+
+def add_perfdata(text):
+    global perfdata
+    text = text.strip()
+    perfdata += " %s " % text
+
+
+def longoutput(text):
+    global longserviceoutput
+    longserviceoutput = longserviceoutput + text
+
+
+def get_longserviceoutput(my_object, interesting_fields):
+    longserviceoutput = ""
+    for i in interesting_fields:
+        longserviceoutput += "%s = %s \n" % (i, my_object[i])
+    return longserviceoutput
+
+
+def check_operationalstate(my_object, print_failed_objects=False, namefield='objectname', detailfield='operationalstatedetail', statefield='operationalstate', valid_states=None):
+    if not valid_states:
+        valid_states = ['good']
+    if not my_object.has_key(detailfield):
+        detailfield = statefield
+    if not my_object.has_key(statefield):
+        if print_failed_objects:
+            longoutput("- Warning, %s does not have any '%s'" %
+                       (my_object[namefield], statefield))
+        return warning
+    if my_object[statefield] not in valid_states:
+        if print_failed_objects:
+            longoutput("- Warning, %s=%s (%s)\n" %
+                       (my_object[namefield], my_object['operationalstate'], my_object[detailfield]))
+        return warning
+    debug("OK, %s=%s (%s)\n" %
+          (my_object[namefield], my_object['operationalstate'], my_object[detailfield]))
+    return ok
+
+
+def check_generic(command="ls disk full", namefield="objectname", perfdata_fields=None, longserviceoutputfields=None, detailedsummary=False):
+    if not perfdata_fields:
+        perfdata_fields = []
+    if not longserviceoutputfields:
+        longserviceoutputfields = []
+    global perfdata
+    nagios_state = ok
+    systems = run_sssu()
+    objects = []
+    if command == 'ls system full':
+        objects = systems
+        for i in systems:
+            i['systemname'] = ''  # i['objectname']
+    else:
+        for i in systems:
+            result = run_sssu(system=i['objectname'], command=command)
+            for x in result:
+                x['systemname'] = i['objectname']
+                objects.append(x)
+    summary = "%s objects found " % len(objects)
+    usedstoragespacegb = 0
+    occupancyalarmlvel = 0
+    warninggb = 0
+    for i in objects:
+        systemname = i['systemname']
+        # Some versions of commandview use "objectname" instead of namefield
+        if i.has_key(namefield):
+            objectname = i[namefield]
+        else:
+            objectname = i['objectname']
+        # Some versions of CV also return garbage objects, luckily it is easy
+        # to find these
+        if i.has_key('objecttype') and i['objecttype'] == 'typenotset':
+            longoutput(
+                "Object %s was skipped because objecttype == typenotset\n" % objectname)
+            continue
+        # Lets see if this object is working
+        nagios_state = max(check_operationalstate(i), nagios_state)
+
+        # Lets add to the summary
+        if i['operationalstate'] != 'good' or detailedsummary == True:
+            summary += " %s/%s=%s " % (
+                systemname, objectname, i['operationalstate'])
+
+        # Lets get some perfdata
+        identifier = "%s/%s_" % (systemname, objectname)
+        i['identifier'] = identifier
+
+        for field in perfdata_fields:
+            if field == '':
+                continue
+            add_perfdata("'%s%s'=%s " %
+                         (identifier, field, i.get(field, None)))
+
+        # Disk group gets a special perfdata treatment
+        if command == "ls disk_group full":
+            totalstoragespacegb = float(i['totalstoragespacegb'])
+            usedstoragespacegb = float(i['usedstoragespacegb'])
+            occupancyalarmlvel = float(i['occupancyalarmlevel'])
+            warninggb = totalstoragespacegb * occupancyalarmlvel / 100
+            add_perfdata(" '%sdiskusage'=%s;%s;%s " %
+                         (identifier, usedstoragespacegb, warninggb, totalstoragespacegb))
+
+        # Long Serviceoutput
+
+        # There are usually to many disks for nagios to display. Skip.
+        if command != "ls disk full":
+            longoutput("\n%s/%s = %s (%s)\n" %
+                       (systemname, objectname, i['operationalstate'], i['operationalstatedetail']))
+
+        # If diskgroup has a problem because it is over allocated. Lets inform
+        # about that
+        if command == "ls disk_group full" and usedstoragespacegb > warninggb:
+                longoutput(
+                    "- %s - diskgroup usage is over %s%% threshold !\n" %
+                    (state[warning], occupancyalarmlvel))
+        # If a disk has a problem, lets display some extra info on it
+        elif command == "ls disk full" and i['operationalstate'] != 'good':
+            longoutput("Warning - %s=%s (%s)\n" %
+                       (i['diskname'], i['operationalstate'], i['operationalstatedetail']))
+            fields = "modelnumber firmwareversion serialnumber failurepredicted  diskdrivetype".split(
+            )
+            for field in fields:
+                longoutput("- %s = %s\n" % (field, i[field]))
+
+        nagios_state = max(nagios_state, check_multiple_objects(i, 'sensors'))
+        nagios_state = max(nagios_state, check_multiple_objects(i, 'fans'))
+        nagios_state = max(
+            nagios_state, check_multiple_objects(i, 'powersupplies'))
+        nagios_state = max(
+            nagios_state, check_multiple_objects(i, 'communicationbuses'))
+        nagios_state = max(
+            nagios_state, check_multiple_objects(i, 'fibrechannelports'))
+        nagios_state = max(nagios_state, check_multiple_objects(i, 'modules'))
+        for x in longserviceoutputfields:
+            if i.has_key(x):
+                longoutput("- %s = %s\n" % (x, i[x]))
+
+    end(summary, perfdata, longserviceoutput, nagios_state)
+
+
+def check_multiple_objects(my_object, name):
+    item_status = not_present
+    if my_object.has_key(name):
+        item_status = not_present
+        valid_states = ['good']
+        namefield = "name"
+        detailfield = 'operationalstatedetail'
+
+        if name == 'fans' or name == 'sensors':
+            valid_states = [
+                'good', 'notavailable', 'unsupported', 'notinstalled']
+        elif name == 'fibrechannelports':
+            valid_states.append('notinstalled')
+        num_items = len(my_object[name])
+        for item in my_object[name]:
+            stat = check_operationalstate(
+                item, print_failed_objects=True, namefield=namefield, valid_states=valid_states, detailfield=detailfield)
+            item_status = max(stat, item_status)
+        longoutput('- %s on %s (%s detected)\n' %
+                   (state[item_status], name, num_items))
+        add_perfdata(" '%s%s'=%s" %
+                     (my_object['identifier'], name, num_items))
+    return item_status
+
+
+def check_controllers():
+    perfdata = ""
+    # longserviceoutput="\n"
+    nagios_state = ok
+    systems = run_sssu()
+    controllers = []
+    for i in systems:
+        result = run_sssu(system=i['objectname'], command="ls controller full")
+        for controller in result:
+            controller['systemname'] = i['objectname']
+            controllers.append(controller)
+    summary = "%s objects found " % len(controllers)
+    for i in controllers:
+        systemname = i['systemname']
+        if i.has_key('controllername'):
+            controllername = i['controllername']
+        else:
+            controllername = i['objectname']
+        # Lets see if this controller is working
+        nagios_state = max(check_operationalstate(i), nagios_state)
+
+        # Lets add to the summary
+        if not i.has_key('operationalstate'):
+            summary += " %s does not have any operationalstate " % controllername
+            nagios_state = max(unknown, nagios_state)
+            continue
+        elif i['operationalstate'] != 'good':
+            summary += " %s/%s=%s " % (
+                systemname, controllername, i['operationalstate'])
+
+        # Lets get some perfdata
+        interesting_fields = "controllermainmemory"
+        identifier = "%s/%s_" % (systemname, controllername)
+        perfdata += get_perfdata(
+            i, interesting_fields.split('|'), identifier=identifier)
+
+        # Long Serviceoutput
+        #longserviceoutput = longserviceoutput + get_longserviceoutput(i, interesting_fields.split('|') )
+        #longserviceoutput = longserviceoutput + "\n%s/%s\n"%(systemname,controllername)
+        longoutput("\n%s/%s = %s (%s)\n" %
+                   (systemname, controllername, i['operationalstate'], i['operationalstatedetail']))
+        longoutput("- firmwareversion = %s \n" % (i['firmwareversion']))
+        longoutput("- serialnumber = %s \n" % (i['serialnumber']))
+
+        controllertemperaturestatus = not_present
+        fanstate = not_present
+        hostportstate = not_present
+        sensorstate = ok
+        source_state = not_present
+        module_state = not_present
+
+        # Check the cache status
+        if i['cachecondition'] == 'good':
+            cache_state = ok
+        else:
+            cache_state = warning
+
+        # Check Temperature
+        if i.has_key("controllertemperaturestatus"):
+            if i['controllertemperaturestatus'] == 'normal':
+                controllertemperaturestatus = ok
+            else:
+                controllertemperaturestatus = warning
+
+        # Process the subsensors
+        for hostport in i['hostports']:
+            #long(" %s = %s\n" % (hostport['portname'], hostport['operationalstate']))
+            hostportstate = max(hostportstate, ok)
+            if hostport['operationalstate'] != 'good':
+                hostportstate = max(warning, hostportstate)
+                message = "Hostport %s state = %s\n" % (
+                    hostport['portname'], hostport['operationalstate'])
+                longoutput(message)
+        if i.has_key('fans'):
+            for fan in i['fans']:
+                fanstate = max(fanstate, ok)
+                #long(" %s = %s\n" % (fan['fanname'], fan['status']))
+                if fan.has_key('status'):
+                    status = fan['status']
+                elif fan.has_key('installstatus'):
+                    status = fan['installstatus']
+                if status != 'normal' and status != 'yes':
+                    fanstate = max(warning, fanstate)
+                    longoutput("Fan %s status = %s\n" %
+                               (fan['fanname'], status))
+        if i.has_key('powersources'):
+            for source in i['powersources']:
+                source_state = max(source_state, ok)
+                if not source.has_key('status'):
+                    continue
+                if source['state'] != 'good':
+                    source_state = max(warning, source_state)
+                    longoutput("Powersource %s status = %s\n" %
+                               (source['type'], source['state']))
+        if i.has_key('modules'):
+            for module in i['modules']:
+                module_state = max(module_state, ok)
+                if module['operationalstate'] not in ('good', 'not_present'):
+                    module_state = max(warning, module_state)
+                    longoutput("Battery Module %s status = %s\n" %
+                               (module['name'], module['operationalstate']))
+
+        for i in (fanstate, hostportstate, sensorstate, source_state, module_state, cache_state, controllertemperaturestatus):
+            nagios_state = max(nagios_state, i)
+
+        longoutput("- %s on fans\n" % (state[fanstate]))
+        longoutput("- %s on cachememory\n" % (state[cache_state]))
+        longoutput("- %s on temperature\n" %
+                   (state[controllertemperaturestatus]))
+        longoutput("- %s on hostports\n" % (state[hostportstate]))
+        longoutput("- %s on sensors\n" % (state[sensorstate]))
+        longoutput("- %s on powersupplies\n" % (state[source_state]))
+        longoutput("- %s on batterymodules\n" % (state[module_state]))
+
+        longoutput('\n')
+    end(summary, perfdata, longserviceoutput, nagios_state)
+
+
+def set_path():
+    global path
+    current_path = getenv('PATH')
+    if path == '':
+        if current_path.find('C:\\') > -1:  # We are on this platform
+            path = ";C:\\Program Files\\Hewlett-Packard\\Sanworks\\Element Manager for StorageWorks HSV"
+        else:
+            path = ":/usr/local/bin"
+    current_path = "%s%s" % (current_path, path)
+    environ['PATH'] = current_path
+set_path()
+
+
+# Create an alarm so that plugin can exit properly if timeout occurs
+exit_with_timeout = lambda x, y: error("Timeout of %s seconds exceeded" % timeout)
+signal.signal(signal.SIGALRM, exit_with_timeout)
+signal.alarm(timeout)
+
+if mode == 'check_systems':
+    perfdata_fields = 'totalstoragespace usedstoragespace availablestoragespace'.split(
+    )
+    longserviceoutputfields = 'licensestate systemtype firmwareversion nscfwversion totalstoragespace usedstoragespace availablestoragespace'.split(
+    )
+    command = "ls system full"
+    namefield = "objectname"
+    check_generic(command=command, namefield=namefield,
+                  longserviceoutputfields=longserviceoutputfields, perfdata_fields=perfdata_fields)
+elif mode == 'check_controllers':
+    check_controllers()
+elif mode == 'check_diskgroups':
+    command = "ls disk_group full"
+    namefield = 'diskgroupname'
+    longserviceoutputfields = "totaldisks levelingstate levelingprogress totalstoragespacegb usedstoragespacegb  occupancyalarmlevel".split(
+    )
+    perfdata_fields = "totaldisks".split()
+    check_generic(command=command, namefield=namefield,
+                  longserviceoutputfields=longserviceoutputfields, perfdata_fields=perfdata_fields)
+elif mode == 'check_disks':
+    check_generic(command="ls disk full", namefield="objectname")
+elif mode == 'check_diskshelfs' or mode == 'check_diskshelves':
+    check_generic(command="ls diskshelf full", namefield="diskshelfname",
+                  longserviceoutputfields=[], perfdata_fields=[])
+else:
+    print "* Error: Mode %s not found" % mode
+    print_help()
+    print "* Error: Mode %s not found" % mode
+    exit(unknown)

check_eva/nagios-okplugin-check_eva.spec

@@ -0,0 +1,67 @@
+%define debug_package %{nil}
+
+Summary:	A Nagios plugin to check HP EVA Disk Systems
+Name:		nagios-okplugin-check_eva
+Version:	2
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		http://opensource.is/trac/wiki/check_eva
+Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_eva/releases/nagios-okplugin-check_eva-%{version}.tar.gz
+Requires:	sssu,nagios-plugins
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Pall Sigurdsson <palli@opensource.is>
+
+
+
+%description
+Checks HP EVA Disk Systems with the sssu binary
+
+
+%prep
+%setup -q
+perl -pi -e "s|/usr/lib|%{_libdir}|g" nrpe.d/check_eva.cfg
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 check_eva.py %{buildroot}%{_libdir}/nagios/plugins/check_eva.py
+install -D -p -m 0755 nrpe.d/check_eva.cfg %{buildroot}/etc/nrpe.d/check_eva.cfg
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+%doc README LICENSE
+%{_libdir}/nagios/plugins/*
+/etc/nrpe.d/check_eva.cfg
+
+%changelog
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 2-1
+- Merge pull request #10 from gitmopp/patch-2 (palli-github@minor.is)
+- bug in for loop. Looped only once (mopp@gmx.net)
+- Fixed output to be more compatible (mopp@gmx.net)
+- check_eva new Make sure --timeout is an integer (palli@opensource.is)
+- check_eva new command line option --timeout (palli@opensource.is)
+- check_eva Fix undefined fix typos (palli@opensource.is)
+- PEP8 cleanup (palli@opensource.is)
+- merged (palli@opensource.is)
+- check_eva - minor bugfixes (palli@opensource.is)
+- check_eva.py more code cleanup with pycharm inspections (palli@opensource.is)
+- check_eva.py - Make code more readable (palli@opensource.is)
+- convert from tabs to spaces (palli@opensource.is)
+- check_eva - fix mixed tab/spaces (palli@opensource.is)
+- Update check_eva.py (sander.grendelman@gmail.com)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.0.2-1
+- changed sssu subcommands from being singlequoted to doublequoted for windows
+  compatibility (palli@opensource.is)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 1.0.1-1
+- new package built with tito
+
+* Mon Mar  1 2010  Pall Sigurdsson <palli@opensource.is> 0.1-1
+- Initial packaging

check_eva/trunk/check_eva.py

@@ -1,693 +0,0 @@
-#!/usr/bin/python
-#
-# Copyright 2010, Pall Sigurdsson <palli@opensource.is>
-#
-# check_eva.py is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# check_eva.py is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# About this script
-# 
-# This script will check the status of all EVA arrays via the sssu binary.
-# You will need the sssu binary in path (/usr/bin/sssu is a good place)
-# If you do not have sssu, check your commandview CD, it should have both
-# binaries for Windows and Linux
-
-
-
-
-
-
-# Some Defaults
-show_perfdata = True
-show_longserviceoutput = True
-debugging = False
-
-
-
-# check_eva defaults
-hostname="localhost"
-username="eva"
-password="eva1234"
-mode="check_systems"
-path=''
-nagios_server = "94.142.154.10"
-nagios_port = 80
-nagios_myhostname = None
-do_phone_home = False
-escape_newlines = False
-check_system = None # By default check all systems
-proxyserver = None
-
-server_side_troubleshooting = False # set to true, if you do not have sssu binary handy
-
-# No real need to change anything below here
-version="1.0"
-ok=0
-warning=1
-critical=2
-unknown=3
-not_present = -1
-
-
-
-state = {}
-state[not_present] = "Not Present"
-state[ok] = "OK"
-state[warning] = "Warning"
-state[critical] = "Critical"
-state[unknown] = "Unknown"
-
-longserviceoutput="\n"
-perfdata=""
-
-valid_modes = ( "check_systems", "check_controllers", "check_diskgroups","check_disks", "check_diskshelfs", "check_diskshelves")
-
-from sys import exit
-from sys import argv
-from os import getenv,putenv,environ
-import subprocess
-import xmlrpclib,httplib
-import socket
-socket.setdefaulttimeout(5) 
-
-
-def print_help():
-	print "check_eva version %s" % version
-	print "This plugin checks HP EVA Array with the sssu command"
-	print ""
-	print "Usage: %s [OPTIONS]" % argv[0]
-	print "OPTIONS:"
-	print  " [--host <host>]"
-	print  " [--username <user>]"
-	print  " [--password <password]"
-	print  " [--path </path/to/sssu>]"
-	print  " [--mode <mode>] "
-	print  " [--test]"
-	print  " [--debug]"
-	print  " [--help]"
-	print  ""
-	print  " Valid modes are: %s" % ', '.join(valid_modes)
-	print  ""
-	print  "Example: %s --host commandview.example.net --username eva --password myPassword --mode check_systems" % (argv[0])
-
-
-def error(errortext):
-	print "* Error: %s" % errortext
-	print_help()
-	print "* Error: %s" % errortext
-	exit(unknown)
-
-def debug( debugtext ):
-	global debugging
-	if debugging:
-		print  debugtext
-
-# parse arguments
-
-arguments=argv[1:]
-while len(arguments) > 0:
-	arg=arguments.pop(0)
-	if arg == 'invalid':
-		pass
-	elif arg == '-H' or arg == '--host':
-		hostname=arguments.pop(0)
-	elif arg == '-U' or arg == '--username':
-		username=arguments.pop(0)
-	elif arg == '-P' or arg == '--password':
-		password = arguments.pop(0)
-	elif arg == '-T' or arg == '--test':
-		testmode=1
-	elif arg == '--path':
-		path = arguments.pop(0) + '/'
-	elif arg == '-M' or arg == '--mode':
-		mode=arguments.pop(0)
-		if mode not in valid_modes:
-			error("Invalid --mode %s" % arg)
-	elif arg == '-d' or arg == '--debug':
-		debugging=True
-	elif arg == '--longserviceoutput':
-		show_longserviceoutput = True
-	elif arg == '--no-longserviceoutput':
-		show_longserviceoutput = False
-	elif arg == '--perfdata':
-		show_perfdata = True
-	elif arg == '--no-perfdata':
-		show_perfdata = False
-	elif arg == '--nagios_myhostname':
-		nagios_myhostname = arguments.pop(0)
-	elif arg == '--nagios_server':
-		nagios_server = arguments.pop(0)
-	elif arg == '--nagios_port':
-		nagios_port = arguments.pop(0)
-	elif arg == '--system':
-		check_system = arguments.pop(0)
-	elif arg == '--phone-home':
-		do_phone_home = True
-	elif arg == '--proxy':
-		proxyserver = arguments.pop(0)
-	elif arg == '--escape-newlines':
-		escape_newlines = True
-	elif arg == '-h' or arg == '--help':
-		print_help()
-		exit(ok)
-	else:
-		error( "Invalid argument %s"% arg)
-
-
-
-
-subitems = {}
-subitems['fan'] = 'fans'
-subitems['source'] = 'powersources'
-subitems['hostport'] = 'hostports'
-subitems['module'] = 'modules'
-subitems['sensor'] = 'sensors'
-subitems['powersupply'] = 'powersupplies'
-subitems['bus'] = 'communicationbuses'
-subitems['port'] = 'fibrechannelports'
-
-
-'''runCommand: Runs command from the shell prompt. Exit Nagios style if unsuccessful'''
-def runCommand(command):
-  proc = subprocess.Popen(command, shell=True, stdout=subprocess.PIPE,stderr=subprocess.PIPE,)
-  stdout, stderr = proc.communicate('through stdin to stdout')
-  if proc.returncode > 0:
-    print "Error %s: %s\n command was: '%s'" % (proc.returncode,stderr.strip(),command)
-    if proc.returncode == 127 or proc.returncode == 1: # File not found, lets print path
-	path=getenv("PATH")
-	print "Current Path: %s" % (path)
-    exit(unknown)
-  else:
-    return stdout
-
-
-
-
-'''Runs the sssu command. This one is responsible for error checking from sssu'''
-def run_sssu(system=None, command="ls system full"):
-	commands = []
-
-	continue_on_error="set option on_error=continue"
-	login="select manager %s USERNAME=%s PASSWORD=%s"%(hostname,username,password)
-
-	commands.append(continue_on_error)
-	commands.append(login)
-	if system != None:
-		commands.append('select SYSTEM "%s"' % system)
-	commands.append(command)
-
-	commandstring = "sssu "
-	for i in commands: commandstring = commandstring + "'%s' " % i 
-	global server_side_troubleshooting
-	if server_side_troubleshooting == True:	
-		commandstring = 'cat "debug/%s"' % command
-	
-	#print mystring
-	#if command == "ls system full":
-	#	output = runCommand("cat sssu.out")
-	#elif command == "ls disk_groups full":
-	#	output = runCommand("cat ls_disk*")
-	#elif command == "ls controller full":
-	#	output = runCommand("cat ls_controller")
-	#else:
-	#	print "What command is this?", command
-	#	exit(unknown)
-	output = runCommand(commandstring)
-	debug( commandstring )
-
-	output = output.split('\n')
-
-	# Lets process the top few results from the sssu command. Make sure the results make sense
-	error = 0
-	if output.pop(0).strip() != '': error = 1
-	if output.pop(0).strip() != '': error = 1
-	if output.pop(0).strip() != 'SSSU for HP StorageWorks Command View EVA': error = 1
-	if output.pop(0).strip().find('Version:') != 0: error=1
-	if output.pop(0).strip().find('Build:') != 0: error=1
-	if output.pop(0).strip().find('NoSystemSelected> ') != 0: error=1
-	#if output.pop(0).strip() != '': error = 1
-	#if output.pop(0).strip().find('NoSystemSelected> ') != 0: error=1
-	#if output.pop(0).strip() != '': error = 1
-	buffer = ""
-	for i in output:
-		buffer = buffer + i + "\n"
-		if i.find('Error') > -1:
-			print "This is the command i was trying to execute: %s" % i
-			error = 1
-		if i.find('information:') > 0: break
-	if error > 0: 
-		print "Error running the sssu command"
-		print commandstring
-		print buffer
-		exit(unknown)
-	
-	objects = []
-	object = None
-	parent_object = None
-	for line in output:
-		if len(line) == 0:
-			continue
-		line = line.strip()
-		tmp = line.split()
-		if len(tmp) == 0:
-			if object:
-				if not object['master'] in objects: objects.append( object['master'] )
-				object = None
-			continue
-		key = tmp[0].strip()
-		if object and not object['master'] in objects: objects.append( object['master'] )
-		if key == 'object':
-			object = {}
-			object['master'] = object
-		if key == 'controllertemperaturestatus':
-			object = object['master']
-		if key == 'iomodules':
-			key = 'modules'
-		#if key in subitems.values():
-		#	object['master'][key] = []
-		if key in subitems.keys():
-			mastergroup = subitems[key]
-			master = object['master']
-			object = {}
-			object['object_type'] = key
-			object['master'] = master
-			if not object['master'].has_key(mastergroup):
-				object['master'][mastergroup] = []
-			object['master'][mastergroup].append(object)
-			
-			
-
-		if line.find('.:') > 0:
-			# We work on first come, first serve basis, so if 
-			# we accidentally see same key again, we will ignore
-			if not object.has_key(key):
-				value = ' '.join( tmp[2:] ).strip()
-				object[key] = value
-	# Check if we were instructed to check only one eva system
-	global check_system
-	if command == "ls system full" and check_system !=  None:
-		tmp_objects = []
-		for i in objects:
-			if i['objectname'] == check_system:
-				tmp_objects.append( i )
-		objects = tmp_objects
-	return objects
-
-def end(summary,perfdata,longserviceoutput,nagios_state):
-	global show_longserviceoutput
-	global show_perfdata
-	global nagios_server
-	global do_phone_home
-	global nagios_port
-	global nagios_myhostname
-	global hostname
-	global mode
-	global escape_newlines
-	global check_system
-
-	message = "%s - %s" % ( state[nagios_state], summary)
-	if show_perfdata:
-		message = "%s | %s" % ( message, perfdata)
-	if show_longserviceoutput:
-		message = "%s\n%s" % ( message, longserviceoutput.strip())
-	if escape_newlines == True:
-		lines = message.split('\n')
-		message = '\\n'.join(lines)
-	debug( "do_phone_home = %s" %(do_phone_home) )
-	if do_phone_home == True:
-		try:
-			if nagios_myhostname is None:
-				if environ.has_key( 'HOSTNAME' ):
-					nagios_myhostname = environ['HOSTNAME']
-				elif environ.has_key( 'COMPUTERNAME' ):
-					nagios_myhostname = environ['COMPUTERNAME']
-				else:
-					nagios_myhostname = hostname
-			try: phone_home(nagios_server,nagios_port, status=nagios_state, message=message, hostname=nagios_myhostname, servicename=mode,system=check_system)
-			except:pass
-
-		except:
-			raise
-	print message
-	exit(nagios_state)
-class ProxiedTransport(xmlrpclib.Transport):
-    def set_proxy(self, proxy):
-        self.proxy = proxy
-    def make_connection(self, host):
-        self.realhost = host
-        h = httplib.HTTP(self.proxy)
-        return h
-    def send_request(self, connection, handler, request_body):
-        connection.putrequest("POST", 'http://%s%s' % (self.realhost, handler))
-    def send_host(self, connection, host):
-        connection.putheader('Host', self.realhost)
-
-
-
-''' phone_home: Sends results to remote nagios server via python xml-rpc '''
-def phone_home(nagios_server,nagios_port, status, message, hostname=None, servicename=None,system=None):
-	debug("phoning home: %s" % (servicename) )
-	if system is not None:
-		servicename = str(servicename) + str(system)
-	uri = "http://%s:%s" % (nagios_server,nagios_port)
-	
-	global proxyserver
-	if proxyserver != None:
-		p = ProxiedTransport()
-		p.set_proxy(proxyserver)
-		s = xmlrpclib.Server( uri, transport=p ) 
-	else:
-		s = xmlrpclib.ServerProxy( uri )
-	s.nagiosupdate(hostname, servicename, status, message)
-	return 0
-
-def check_systems():
-	summary=""
-	perfdata=""
-	#longserviceoutput="\n"
-	nagios_state = ok
-	objects = run_sssu()
-	for i in objects:
-		name = i['objectname']
-		operationalstate = i['operationalstate']
-		# Lets see if this array is working
-		if operationalstate != 'good':
-			nagios_state = max(nagios_state, warning)
-		# Lets add to the summary
-		summary = summary + " %s=%s " %(name, operationalstate)
-		# Collect the performance data
-		interesting_perfdata = 'totalstoragespace|usedstoragespace|availablestoragespace'
-		perfdata = perfdata + get_perfdata(i,interesting_perfdata.split('|'), identifier="%s_"% name)
-		# Collect extra info for longserviceoutput
-		long("%s = %s (%s)\n" % ( i['objectname'], i['operationalstate'], i['operationalstatedetail']) )
-		interesting_fields = 'licensestate|systemtype|firmwareversion|nscfwversion|totalstoragespace|usedstoragespace|availablestoragespace'
-		for x in interesting_fields.split('|'):
-			long( "- %s = %s \n" %(x, i[x]) )
-		long("\n")
-	end(summary,perfdata,longserviceoutput,nagios_state)
-
-
-
-def get_perfdata(object, interesting_fields, identifier=""):
-	perfdata = ""
-	for i in interesting_fields:
-		if i == '': continue
-		perfdata = perfdata + "'%s%s'=%s " % (identifier, i, object[i])
-	return perfdata
-
-def add_perfdata(text):
-	global perfdata
-	text = text.strip()
-	perfdata = perfdata + " %s " % (text)
-
-def long(text):
-	global longserviceoutput
-	longserviceoutput = longserviceoutput + text
-def get_longserviceoutput(object, interesting_fields):
-	longserviceoutput = ""
-	for i in interesting_fields:
-		longserviceoutput = longserviceoutput + "%s = %s \n" %(i, object[i])
-	return longserviceoutput
-
-def check_operationalstate(object, print_failed_objects=False,namefield='objectname',detailfield='operationalstatedetail',statefield='operationalstate',valid_states=['good']):
-	if not object.has_key(detailfield): detailfield = statefield
-	if not object.has_key(statefield):
-		if print_failed_objects:
-			long("- Warning, %s does not have any '%s'" % ( object[namefield], statefield ) )
-		return warning
-	if object[statefield] not in valid_states:
-		if print_failed_objects:
-			long("- Warning, %s=%s (%s)\n" % ( object[namefield], object['operationalstate'], object[detailfield] ))
-		return warning
-	debug( "OK, %s=%s (%s)\n" % ( object[namefield], object['operationalstate'], object[detailfield] ) )
-	return ok
-
-
-
-def check_generic(command="ls disk full",namefield="objectname", perfdata_fields=[], longserviceoutputfields=[], detailedsummary=False):
-        summary=""
-	global perfdata
-        nagios_state = ok
-        systems = run_sssu()
-        objects = []
-	if command == 'ls system full':
-		objects = systems
-		for i in systems: i['systemname'] = '' #i['objectname']
-	else:
-        	for i in systems:
-        	        result = run_sssu(system=i['objectname'], command=command)
-        	        for x in result:
-        	                x['systemname'] = i['objectname']
-        	                objects.append( x )
-	summary = "%s objects found " % len(objects)
-        for i in objects:
-                systemname = i['systemname']
-		
-		# Some versions of commandview use "objectname" instead of namefield
-		if i.has_key( namefield ):
-			objectname = i[namefield]
-		else:
-			objectname = i['objectname']
-                # Some versions of CV also return garbage objects, luckily it is easy to find these
-		if i.has_key('objecttype') and i['objecttype'] == 'typenotset':
-			long("Object %s was skipped because objecttype == typenotset\n" % objectname )
-			continue
-		# Lets see if this object is working
-                nagios_state = max( check_operationalstate(i), nagios_state )
-
-                
-		# Lets add to the summary
-		if  i['operationalstate'] != 'good' or detailedsummary == True:
-                	summary = summary + " %s/%s=%s " %(systemname,objectname, i['operationalstate'])
-
-                # Lets get some perfdata
-                identifier = "%s/%s_" % (systemname,objectname)
-		i['identifier'] = identifier
-
-
-		for field in perfdata_fields:
-			if field == '': continue
-			add_perfdata( "'%s%s'=%s " % (identifier, field, i[field]) )
-		
-		# Disk group gets a special perfdata treatment
-		if command == "ls disk_group full":
-			totalstoragespacegb= float( i['totalstoragespacegb'] )
-			usedstoragespacegb= float ( i['usedstoragespacegb'] )
-			occupancyalarmlvel = float( i['occupancyalarmlevel'] ) 
-			warninggb= totalstoragespacegb * occupancyalarmlvel / 100
-			add_perfdata( " '%sdiskusage'=%s;%s;%s "% (identifier, usedstoragespacegb,warninggb,totalstoragespacegb) )
-		
-                # Long Serviceoutput
-		
-		# There are usually to many disks for nagios to display. Skip.
-		if command != "ls disk full":
-			long( "\n%s/%s = %s (%s)\n"%(systemname,objectname,i['operationalstate'], i['operationalstatedetail']) )
-		
-		# If diskgroup has a problem because it is over allocated. Lets inform about that
-		if command == "ls disk_group full" and usedstoragespacegb > warninggb:
-				long("- %s - diskgroup usage is over %s%% threshold !\n" % (state[warning], occupancyalarmlvel) )
-		# If a disk has a problem, lets display some extra info on it
-		elif command == "ls disk full" and i['operationalstate'] != 'good':
-			long( "Warning - %s=%s (%s)\n" % (i['diskname'], i['operationalstate'], i['operationalstatedetail'] ))
-			fields="modelnumber firmwareversion serialnumber failurepredicted  diskdrivetype".split()
-			for field in fields:
-				long( "- %s = %s\n" % (field, i[field]) )
-
-
-		nagios_state = max(nagios_state, check_multiple_objects(i, 'sensors'))
-		nagios_state = max(nagios_state, check_multiple_objects(i, 'fans'))
-		nagios_state = max(nagios_state, check_multiple_objects(i, 'powersupplies'))
-		nagios_state = max(nagios_state, check_multiple_objects(i, 'communicationbuses'))
-		nagios_state = max(nagios_state, check_multiple_objects(i, 'fibrechannelports'))
-		nagios_state = max(nagios_state, check_multiple_objects(i, 'modules'))
-                for x in longserviceoutputfields:
-			if i.has_key( x ):
-				long( "- %s = %s\n" % (x, i[x]))
-
-        end(summary,perfdata,longserviceoutput,nagios_state)
-
-def check_multiple_objects(object, name):
-	item_status = not_present
-	if object.has_key(name): 
-		item_status = not_present
-		valid_states=['good']
-		namefield="name"	
-		detailfield = 'operationalstatedetail'
-
-
-
-		if name == 'fans' or name == 'sensors':
-			valid_states = ['good','notavailable','unsupported','notinstalled']
-		elif name == 'fibrechannelports':
-			valid_states.append( 'notinstalled' )
-		num_items = len(object[name])
-		for item in object[name]:
-			stat = check_operationalstate( item,print_failed_objects=True, namefield=namefield, valid_states=valid_states,detailfield=detailfield)
-			item_status = max( stat, item_status )
-		long('- %s on %s (%s detected)\n'% (state[item_status], name, num_items) )
-		add_perfdata( " '%s%s'=%s" % (object['identifier'],name, num_items) )
-	return item_status
-	
-
-
-def check_controllers():
-	summary=""
-	perfdata=""
-	#longserviceoutput="\n"
-	nagios_state = ok
-	systems = run_sssu()
-	controllers =[]
-	for i in systems:
-		result = run_sssu(system=i['objectname'], command="ls controller full")
-		for controller in result:
-			controller['systemname'] = i['objectname']
-			controllers.append( controller )
-	summary = "%s objects found " % len(controllers)	
-	for i in controllers:
-		systemname = i['systemname']
-		if i.has_key('controllername'):
-			controllername = i['controllername']
-		else:
-			controllername = i['objectname']
-		# Lets see if this controller is working
-		nagios_state = max( check_operationalstate(i), nagios_state )
-
-		# Lets add to the summary
-		if not i.has_key('operationalstate'):
-			summary = summary + " %s does not have any operationalstate " % controllername
-			nagios_state = max( unknown, nagios_state )
-			continue
-		elif  i['operationalstate'] != 'good':
-			summary = summary + " %s/%s=%s " %(systemname,controllername, i['operationalstate'])
-		
-		# Lets get some perfdata
-		interesting_fields = "controllermainmemory"
-		identifier = "%s/%s_" % (systemname,controllername)
-		perfdata = perfdata + get_perfdata(i, interesting_fields.split('|'), identifier=identifier)
-
-		# Long Serviceoutput
-		interesting_fields = "operationalstate|operationalstatedetail|firmwareversion|serialnumber"
-		#longserviceoutput = longserviceoutput + get_longserviceoutput(i, interesting_fields.split('|') )
-		#longserviceoutput = longserviceoutput + "\n%s/%s\n"%(systemname,controllername)
-		long( "\n%s/%s = %s (%s)\n"%(systemname,controllername,i['operationalstate'], i['operationalstatedetail']) )
-		long( "- firmwareversion = %s \n" %(i['firmwareversion']))
-		long( "- serialnumber = %s \n" %(i['serialnumber']))
-
-
-		controllertemperaturestatus = not_present
-		cache_state = not_present
-		fanstate = not_present
-		hostportstate = not_present
-		sensorstate = ok
-		source_state = not_present
-		module_state = not_present
-
-		# Check the cache status
-		if i['cachecondition'] == 'good':
-			cache_state = ok
-		else:
-			cache_state = warning
-		
-		# Check Temperature
-		if i.has_key("controllertemperaturestatus"):
-			if i['controllertemperaturestatus'] == 'normal':
-				controllertemperaturestatus = ok
-			else:
-				controllertemperaturestatus = warning
-		
-		
-		# Process the subsensors
-		for hostport in i['hostports']:
-			#long(" %s = %s\n" % (hostport['portname'], hostport['operationalstate']))
-			hostportstate = max(hostportstate,ok)
-			if hostport['operationalstate'] != 'good':
-				hostportstate = max(warning,hostport_state)
-				long("Hostport %s state = %s\n" % hostport['portname'], hostport['operationalstate'])
-		if i.has_key('fans'):
-			for fan in i['fans']:
-				fanstate = max(fanstate,ok)
-				#long(" %s = %s\n" % (fan['fanname'], fan['status']))
-				if fan.has_key('status'): status = fan['status']
-				elif fan.has_key('installstatus'): status = fan['installstatus']
-				if status != 'normal' and status != 'yes':
-					fanstate = max(warning,fanstate)
-					long("Fan %s status = %s\n" % (fan['fanname'],status))
-		if i.has_key('powersources'):
-			for source in i['powersources']:
-				source_state = max(source_state,ok)
-				if not source.has_key('status'): continue
-				if source['state'] != 'good':
-					source_state = max(warning,source_state)
-					long("Powersource %s status = %s\n" % (source['type'],source['state']))
-		if i.has_key('modules'):
-			for module in i['modules']:
-				module_state = max(module_state,ok)
-				if module['operationalstate'] not in ('good','not_present'):
-					module_state = max(warning,module_state)
-					long("Battery Module %s status = %s\n" % (module['name'],module['operationalstate']))
-		
-
-		for i in (fanstate,hostportstate,sensorstate,source_state,module_state,cache_state,controllertemperaturestatus):
-			nagios_state = max(nagios_state, i)
-	
-		long("- %s on fans\n"%( state[fanstate] ) )
-		long("- %s on cachememory\n"%( state[cache_state] ) )
-		long("- %s on temperature\n"%( state[controllertemperaturestatus] ) )
-		long("- %s on hostports\n"%( state[hostportstate] ) )
-		long("- %s on sensors\n"%( state[sensorstate] ) )
-		long("- %s on powersupplies\n"%( state[source_state] ) )
-		long("- %s on batterymodules\n"%( state[module_state] ) )
-			
-			
-		long('\n')
-	end(summary,perfdata,longserviceoutput,nagios_state)
-
-def set_path():
-	global path
-	current_path = getenv('PATH')
-	if path == '':
-		if current_path.find('C:\\') > -1: # We are on this platform
-			path = ";C:\\Program Files\\Hewlett-Packard\\Sanworks\\Element Manager for StorageWorks HSV"
-		else:
-			path = ":/usr/local/bin"
-	current_path = "%s%s" % (current_path,path)
-        environ['PATH'] = current_path
-set_path()
-
-
-
-if mode == 'check_systems':
-                perfdata_fields = 'totalstoragespace usedstoragespace availablestoragespace'.split()
-                longserviceoutputfields = 'licensestate systemtype firmwareversion nscfwversion totalstoragespace usedstoragespace availablestoragespace'.split()
-		command = "ls system full"
-		namefield="objectname"
-		check_generic(command=command,namefield=namefield,longserviceoutputfields=longserviceoutputfields, perfdata_fields=perfdata_fields)
-		#check_systems
-elif mode == 'check_controllers':
-	check_controllers()
-elif mode == 'check_diskgroups':
-	command = "ls disk_group full"
-	namefield='diskgroupname'
-	longserviceoutputfields = "totaldisks levelingstate levelingprogress totalstoragespacegb usedstoragespacegb  occupancyalarmlevel".split()
-	perfdata_fields="totaldisks".split()	
-	check_generic(command=command,namefield=namefield,longserviceoutputfields=longserviceoutputfields, perfdata_fields=perfdata_fields)
-elif mode == 'check_disks':
-	check_generic(command="ls disk full",namefield="objectname")
-elif mode == 'check_diskshelfs' or mode == 'check_diskshelves':
-        check_generic(command="ls diskshelf full",namefield="diskshelfname",longserviceoutputfields=[], perfdata_fields=[])
-else:
-	print "* Error: Mode %s not found" % mode
-	print_help()
-	print "* Error: Mode %s not found" % mode
-	exit(unknown)
-

check_eva/trunk/nagios-okplugin-check_eva.spec

@@ -1,44 +0,0 @@
-%define debug_package %{nil}
-
-Summary:	A Nagios plugin to check HP EVA Disk Systems
-Name:		nagios-okplugin-check_eva
-Version:	AUTOVERSION
-Release:	1%{?dist}
-License:	GPLv2+
-Group:		Applications/System
-URL:		http://opensource.is/trac/wiki/check_eva
-Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_eva/releases/nagios-okplugin-check_eva-%{version}.tar.gz
-Requires:	sssu,nagios-plugins
-BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Packager:	Pall Sigurdsson <palli@opensource.is>
-
-
-
-%description
-Checks HP EVA Disk Systems with the sssu binary
-
-
-%prep
-%setup -q
-perl -pi -e "s|/usr/lib|%{_libdir}|g" nrpe.d/check_eva.cfg
-
-%build
-
-
-%install
-rm -rf %{buildroot}
-install -D -p -m 0755 check_eva.py %{buildroot}%{_libdir}/nagios/plugins/check_eva.py
-install -D -p -m 0755 nrpe.d/check_eva.cfg %{buildroot}/etc/nrpe.d/check_eva.cfg
-
-%clean
-rm -rf %{buildroot}
-
-%files
-%defattr(-,root,root,-)
-%doc README LICENSE
-%{_libdir}/nagios/plugins/*
-/etc/nrpe.d/check_eva.cfg
-
-%changelog
-* Mon Mar  1 2010  Pall Sigurdsson <palli@opensource.is> 0.1-1
-- Initial packaging

check_firewall_active/check_firewall_active.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+EXIT_OK=0
+EXIT_WARN=1
+EXIT_CRIT=2
+
+PATH=/sbin:/usr/sbin:$PATH
+
+if [ "$(id -u)" != "0" ]; then
+	echo "This script must be run as root" 1>&2
+	exit $EXIT_CRIT
+fi
+
+blocks=$(iptables -L -v -n | egrep 'REJECT|DROP' | wc -l)
+
+if [ $blocks -eq 0 ]; then
+	echo "CRITICAL: No firewall detected"
+	exit $EXIT_CRIT
+fi
+
+echo "OK: Firewall is active"
+exit $EXIT_OK
+

check_firewall_active/nagios-okplugin-check_firewall_active.spec

@@ -0,0 +1,52 @@
+%define debug_package %{nil}
+
+Summary:	A Nagios plugin to check if iptables are actually enforcing rules
+Name:		nagios-okplugin-check_firewall_active
+Version:	1.0.2
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		https://github.com/opinkerfi/nagios-plugins/issues
+Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_firewall_active/releases/nagios-okplugin-check_firewall_active-%{version}.tar.gz
+Requires:	nagios-nrpe
+Requires:	iptables
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Richard Allen <ra@ok.is>
+
+
+
+%description
+A Nagios plugin to check if iptables are actually enforcing rules
+
+
+%prep
+%setup -q
+#perl -pi -e "s|/usr/lib64|%{_libdir}|g" nrpe.d/check_firewall_active.cfg
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 check_firewall_active.sh %{buildroot}%{_libdir}/nagios/plugins/check_firewall_active.sh
+install -D -p -m 0755 nrpe.d/check_firewall_active.cfg %{buildroot}/etc/nrpe.d/check_firewall_active.cfg
+install -D -p -m 0644 sudoers.d/check_firewall_active %{buildroot}/etc/sudoers.d/check_firewall_active
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+#%doc README LICENSE
+%{_libdir}/nagios/plugins/*
+/etc/nrpe.d/check_firewall_active.cfg
+/etc/sudoers.d/check_firewall_active
+
+%post
+restorecon -v %{_libdir}/nagios/plugins/check_firewall_active.sh /etc/nrpe.d/check_firewall_active.cfg /etc/sudoers.d/check_firewall_active
+
+%changelog
+* Thu Dec 21 2016  Gardar Thorsteinsson <gardart@gmail.com> 1.0.1-1
+* Thu Dec 21 2016  Gardar Thorsteinsson <gardart@gmail.com> 1.0.0-3
+* Thu Dec 20 2016  Richard Allen <ra@ok.is> 0.1-1
+- Initial packaging

check_firewall_active/nrpe.d/check_firewall_active.cfg

@@ -0,0 +1,3 @@
+
+
+command[check_firewall_active]=sudo /usr/lib64/nagios/plugins/check_firewall_active.sh

check_firewall_active/sudoers.d/check_firewall_active

@@ -0,0 +1,2 @@
+Defaults:nrpe	!requiretty
+nrpe		ALL = (root) NOPASSWD: /usr/lib64/nagios/plugins/check_firewall_active.sh

check_hpacucli/check_hpacucli.py

@@ -0,0 +1,362 @@
+#!/usr/bin/python
+#
+# Copyright 2010, Pall Sigurdsson <palli@opensource.is>
+#
+# check_hpacucli.py is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# check_hpacucli.py is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# About this script
+#
+# This script will check the status of Smart Array Raid Controller
+# You need the hpacucli binary in path (/usr/sbin/hpacucli is a good place)
+# hpacucli comes with the Proliant Support Pack (PSP) from HP
+
+debugging = False
+
+# No real need to change anything below here
+version = "1.1"
+ok = 0
+warning = 1
+critical = 2
+unknown = 3
+not_present = -1
+nagios_status = -1
+
+state = {}
+state[not_present] = "Not Present"
+state[ok] = "OK"
+state[warning] = "Warning"
+state[critical] = "Critical"
+state[unknown] = "Unknown"
+
+
+longserviceoutput = "\n"
+perfdata = ""
+summary = ""
+sudo = False
+
+
+from sys import exit
+from sys import argv
+from os import getenv, putenv, environ
+import subprocess
+
+
+def print_help():
+    print "check_hpacucli version %s" % version
+    print "This plugin checks HP Array with the hpacucli command"
+    print ""
+    print "Usage: %s " % argv[0]
+    print "Usage: %s [--help]" % argv[0]
+    print "Usage: %s [--version]" % argv[0]
+    print "Usage: %s [--path </path/to/hpacucli>]" % argv[0]
+    print "Usage: %s [--no-perfdata]" % argv[0]
+    print "Usage: %s [--no-longoutput]" % argv[0]
+    print  ""
+
+
+def error(errortext):
+    print "* Error: %s" % errortext
+    print_help()
+    print "* Error: %s" % errortext
+    exit(unknown)
+
+
+def debug(debugtext):
+    global debugging
+    if debugging:
+        print  debugtext
+
+
+def runCommand(command):
+    """ Run command from the shell prompt. Exit Nagios style if unsuccessful"""
+    proc = subprocess.Popen(command,
+                            shell=True,
+                            stdout=subprocess.PIPE,
+                            stderr=subprocess.PIPE,
+                            )
+    stdout, stderr = proc.communicate('through stdin to stdout')
+    if proc.returncode > 0:
+        print "Error %s: %s\n command was: '%s'"\
+              % (proc.returncode, stderr.strip(), command)
+    debug("results: %s" % (stdout.strip()))
+    if proc.returncode == 127:  # File not found, lets print path
+        path = getenv("PATH")
+        print "Check if your path is correct %s" % (path)
+    if stderr.find('Password:') == 0 and command.find('sudo') == 0:
+        print "Check if user is in the sudoers file"
+    if stderr.find('sorry, you must have a tty to run sudo') == 0 and command.find('sudo') == 0:
+        print "Please remove 'requiretty' from /etc/sudoers"
+        exit(unknown)
+    else:
+        return stdout
+
+
+def end():
+    global summary
+    global longserviceoutput
+    global perfdata
+    global nagios_status
+    print "%s - %s | %s" % (state[nagios_status], summary, perfdata)
+    print longserviceoutput
+    if nagios_status < 0:
+        nagios_status = unknown
+    exit(nagios_status)
+
+
+def add_perfdata(text):
+    global perfdata
+    text = text.strip()
+    perfdata = perfdata + " %s " % (text)
+
+
+def add_long(text):
+    global longserviceoutput
+    longserviceoutput = longserviceoutput + text + '\n'
+
+
+def add_summary(text):
+    global summary
+    summary = summary + text
+
+
+def set_path(path):
+    current_path = getenv('PATH')
+    if current_path.find('C:\\') > -1:  # We are on this platform
+        if path == '':
+            path = ";C:\Program Files\Hewlett-Packard\Sanworks\Element Manager for StorageWorks HSV"
+            path = path + ";C:\Program Files (x86)\Compaq\Hpacucli\Bin"
+            path = path + ";C:\Program Files\Compaq\Hpacucli\Bin"
+        else:
+            path = ';' + path
+    else:  # Unix/Linux, etc
+        if path == '':
+            path = ":/usr/sbin"
+        else:
+            path = ':' + path
+    current_path = "%s%s" % (current_path, path)
+    environ['PATH'] = current_path
+
+
+def run_hpacucli(run_type='controllers', controller=None):
+    if run_type == 'controllers':
+        command = "hpacucli  controller all show detail"
+    elif run_type in ('logicaldisks', 'physicaldisks'):
+        if 'Slot' not in controller:
+            add_summary("Controller not found")
+            end()
+        identifier = 'slot=%s' % (controller['Slot'])
+        command = "hpacucli  controller %s %s all show detail"
+        if run_type == 'logicaldisks':
+            subcommand = 'ld'
+        elif run_type == 'physicaldisks':
+            subcommand = 'pd'
+        else:
+            end()
+            return
+        command = command % (identifier, subcommand)
+    debug(command)
+    if sudo:
+        command = "sudo " + command
+    output = runCommand(command)
+    # Some basic error checking
+    error_strings = ['Permission denied']
+    error_strings.append('Error: You need to have administrator rights to continue.')
+    for error in error_strings:
+        if output.find(error) > -1 and output.find("sudo") != 0:
+            command = "sudo " + command
+            print command
+            output = runCommand(command)
+    output = output.split('\n')
+    objects = []
+    my_object = None
+    for i in output:
+        if len(i) == 0:
+            continue
+        if i.strip() == '':
+            continue
+        if i.startswith('Note:'):
+            continue
+        if run_type == 'controllers' and i[0] != ' ':   # space on first line
+            if my_object and not my_object in objects:
+                objects.append(my_object)
+            my_object = {}
+            my_object['name'] = i
+        elif run_type == 'logicaldisks' and i.find('Logical Drive:') > 0:
+            if my_object and not my_object in objects:
+                objects.append(my_object)
+            my_object = {}
+            my_object['name'] = i.strip()
+        elif run_type == 'physicaldisks' and i.find('physicaldrive') > 0:
+            if my_object and not my_object in objects:
+                objects.append(my_object)
+            my_object = {}
+            my_object['name'] = i.strip()
+        else:
+            i = i.strip()
+            if i.find(':') < 1:
+                continue
+            i = i.split(':')
+            if i[0] == '':
+                continue  # skip empty lines
+            if len(i) == 1:
+                continue
+            key = i[0].strip()
+            value = ' '.join(i[1:]).strip()
+            my_object[key] = value
+    if my_object and not my_object in objects:
+        objects.append(my_object)
+    return objects
+
+
+controllers = []
+
+
+def check_controllers():
+    global controllers
+    status = -1
+    controllers = run_hpacucli()
+    if len(controllers) == 0:
+        add_summary("No Disk Controllers Found. Exiting...")
+        global nagios_state
+        nagios_state = unknown
+        end()
+    add_summary("Found %s controllers" % (len(controllers)))
+    for i in controllers:
+        controller_status = check(i, 'Controller Status', 'OK')
+        status = max(status, controller_status)
+
+        cache_status = check(i, 'Cache Status')
+        status = max(status, cache_status)
+
+        controller_serial = 'n/a'
+        cache_serial = 'n/a'
+        if 'Serial Number' in i:
+            controller_serial = i['Serial Number']
+        if 'Cache Serial Number' in i:
+            cache_serial = i['Cache Serial Number']
+        add_long("%s" % (i['name']))
+        add_long("- Controller Status: %s (sn: %s)"
+                 % (state[controller_status], controller_serial))
+        add_long("- Cache Status: %s (sn: %s)"
+                  % (state[cache_status], cache_serial))
+
+        if controller_status > ok or cache_status > ok:
+            add_summary(";%s on %s;" % (state[controller_status], i['name']))
+
+    add_summary(', ')
+    return status
+
+
+def check_logicaldisks():
+    global controllers
+    if len(controllers) < 1:
+        controllers = run_hpacucli()
+    logicaldisks = []
+    for controller in controllers:
+        for ld in run_hpacucli(run_type='logicaldisks',
+                                controller=controller):
+            logicaldisks.append(ld)
+    status = -1
+    add_long("\nChecking logical Disks:")
+    add_summary("%s logicaldisks" % (len(logicaldisks)))
+    for i in logicaldisks:
+        ld_status = check(i, 'Status')
+        status = max(status, ld_status)
+
+        if i.get('Status') == 'Failed':
+            status = max(status, critical)
+
+        mount_point = i['Mount Points']
+        add_long("- %s (%s) = %s" % (i['name'], mount_point, state[ld_status]))
+    add_summary(". ")
+
+
+def check_physicaldisks():
+    global controllers
+    disktype = 'physicaldisks'
+    if len(controllers) < 1:
+        controllers = run_hpacucli()
+    disks = []
+    for controller in controllers:
+        for disk in run_hpacucli(run_type=disktype, controller=controller):
+            disks.append(disk)
+    status = -1
+    add_long("\nChecking Physical Disks:")
+    add_summary("%s %s" % (len(disks), disktype))
+    for i in disks:
+        disk_status = check(i, 'Status')
+        status = max(status, disk_status)
+
+        size = i['Size']
+        firmware = i['Firmware Revision']
+        interface = i['Interface Type']
+        serial = i['Serial Number']
+        model = i['Model']
+        add_long("- %s, %s, %s = %s" %
+                 (i['name'], interface, size, state[disk_status])
+        )
+        if disk_status > ok:
+            error_str = "-- Replace drive, firmware=%s, model=%s, serial=%s"
+            add_long(error_str % (firmware, model, serial))
+    if status > ok:
+        add_summary("(errors)")
+        add_summary(". ")
+
+
+def check(my_object, field, valid_states=None):
+    if valid_states is None:
+        valid_states = ['OK']
+    state = -1
+    global nagios_status
+    if field in my_object:
+        if my_object[field] in valid_states:
+            state = ok
+        else:
+            state = warning
+    nagios_status = max(nagios_status, state)
+    return state
+
+
+def parse_arguments():
+    arguments = argv[1:]
+    while len(arguments) > 0:
+        arg = arguments.pop(0)
+        if arg == '--help':
+            print_help()
+            exit(ok)
+        elif arg == '--path':
+            path = arguments.pop(0)
+            set_path(path)
+        elif arg == '--debug':
+            global debugging
+            debugging = True
+        elif arg == '--sudo':
+            global sudo
+            sudo = True
+        else:
+            print_help()
+            exit(unknown)
+
+
+def main():
+    parse_arguments()
+    set_path('')
+    check_controllers()
+    check_logicaldisks()
+    check_physicaldisks()
+    end()
+
+
+if __name__ == '__main__':
+    main()

check_hpacucli/nagios-okplugin-check_hpacucli.spec

@@ -2,7 +2,7 @@
 
 Summary:	A Nagios plugin to check HP Array with hpacucli
 Name:		nagios-okplugin-check_hpacucli
-Version:	0.0.2
+Version:	2
 Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
@@ -19,6 +19,7 @@ Checks HP Array with hpacucli
 %prep
 %setup -q
 perl -pi -e "s|/usr/lib|%{_libdir}|g" nrpe.d/check_hpacucli.cfg
+perl -pi -e "s|/usr/lib64|%{_libdir}|g" sudoers.d/*
 
 %build
 
@@ -27,6 +28,7 @@ perl -pi -e "s|/usr/lib|%{_libdir}|g" nrpe.d/check_hpacucli.cfg
 rm -rf %{buildroot}
 install -D -p -m 0755 check_hpacucli.py %{buildroot}%{_libdir}/nagios/plugins/check_hpacucli.py
 install -D -p -m 0755 nrpe.d/check_hpacucli.cfg %{buildroot}/etc/nrpe.d/check_hpacucli.cfg
+install -D -p -m 0440 sudoers.d/check_hpacucli %{buildroot}/etc/sudoers.d/check_hpacucli
 
 %clean
 rm -rf %{buildroot}
@@ -36,7 +38,28 @@ rm -rf %{buildroot}
 %doc README LICENSE
 %{_libdir}/nagios/plugins/*
 /etc/nrpe.d/check_hpacucli.cfg
+/etc/sudoers.d/check_hpacucli
 
 %changelog
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 2-1
+- check_hpacucli.py - fix typo in hpacucli command (palli@opensource.is)
+- check_hpacucli.py: pep8 cleanup (palli@opensource.is)
+- check_hpacucli - fix tab indentation (palli@opensource.is)
+- check_hpacucli: ignore hpacucli output that starts with "Note:"
+  (palli@opensource.is)
+- sudoers.d added to install (you@example.com)
+- dummy commit (you@example.com)
+- dummy commit (you@example.com)
+- Add sudoers support to check_hpacucli (palli@opensource.is)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.2-2
+- version number of scripts bumped (palli@opensource.is)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.2-1
+- check_command is now sudo'ed (palli@opensource.is)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.3-1
+- new package built with tito
+
 * Mon Mar  1 2010  Pall Sigurdsson <palli@opensource.is> 0.1-1
 - Initial packaging

check_hpacucli/nrpe.d/check_hpacucli.cfg

@@ -0,0 +1,2 @@
+command[check_hpacucli]=sudo /usr/lib/nagios/plugins/check_hpacucli.py
+

check_hpacucli/sudoers.d/check_hpacucli

@@ -0,0 +1,2 @@
+Defaults:nrpe	!requiretty
+nrpe        ALL=(ALL)       NOPASSWD: /usr/lib64/nagios/plugins/check_hpacucli.py

check_hpacucli/trunk/check_hpacucli.py

@@ -1,329 +0,0 @@
-#!/usr/bin/python
-#
-# Copyright 2010, Pall Sigurdsson <palli@opensource.is>
-#
-# check_hpacucli.py is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# check_hpacucli.py is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-# About this script
-# 
-# This script will check the status of Smart Array Raid Controller
-# You will need the hpacucli binary in path (/usr/sbin/hpacucli is a good place)
-# hpacucli comes with the Proliant Support Pack (PSP) from HP
-
-debugging = False
-
-
-
-# No real need to change anything below here
-version="1.0"
-ok=0
-warning=1
-critical=2
-unknown=3 
-not_present = -1 
-nagios_status = -1
-
-
-
-state = {}
-state[not_present] = "Not Present"
-state[ok] = "OK"
-state[warning] = "Warning"
-state[critical] = "Critical"
-state[unknown] = "Unknown"
-
-
-longserviceoutput="\n"
-perfdata=""
-summary=""
-sudo=False
-
-
-from sys import exit
-from sys import argv
-from os import getenv,putenv,environ
-import subprocess
-
-
-
-def print_help():
-        print "check_hpacucli version %s" % version
-        print "This plugin checks HP Array with the hpacucli command"
-        print ""
-        print "Usage: %s " % argv[0]
-        print "Usage: %s [--help]" % argv[0]
-        print "Usage: %s [--version]" % argv[0]
-        print "Usage: %s [--path </path/to/hpacucli>]" % argv[0]
-        print "Usage: %s [--no-perfdata]" % argv[0]
-        print "Usage: %s [--no-longoutput]" % argv[0]
-        print  ""
-
-
-def error(errortext):
-        print "* Error: %s" % errortext
-        print_help()
-        print "* Error: %s" % errortext
-        exit(unknown)
-
-def debug( debugtext ):
-        global debugging
-        if debugging:
-                print  debugtext
-
-
-'''runCommand: Runs command from the shell prompt. Exit Nagios style if unsuccessful'''
-def runCommand(command):
-  proc = subprocess.Popen(command, shell=True, stdout=subprocess.PIPE,stderr=subprocess.PIPE,)
-  stdout, stderr = proc.communicate('through stdin to stdout')
-  if proc.returncode > 0:
-    print "Error %s: %s\n command was: '%s'" % (proc.returncode,stderr.strip(),command)
-    debug("results: %s" % (stdout.strip() ) )
-    if proc.returncode == 127: # File not found, lets print path
-        path=getenv("PATH")
-        print "Check if your path is correct %s" % (path)
-    if stderr.find('Password:') == 0 and command.find('sudo') == 0:
-      print "Check if user is in the sudoers file"
-    if stderr.find('sorry, you must have a tty to run sudo') == 0 and command.find('sudo') == 0:
-      print "Please remove 'requiretty' from /etc/sudoers"
-    exit(unknown)
-  else:
-    return stdout
-
-def end():
-	global summary
-	global longserviceoutput
-	global perfdata
-	global nagios_status
-        print "%s - %s | %s" % (state[nagios_status], summary,perfdata)
-        print longserviceoutput
-	if nagios_status < 0: nagios_status = unknown
-        exit(nagios_status)
-
-def add_perfdata(text):
-        global perfdata
-        text = text.strip()
-        perfdata = perfdata + " %s " % (text)
-
-def add_long(text):
-        global longserviceoutput
-        longserviceoutput = longserviceoutput + text + '\n'
-
-def add_summary(text):
-	global summary
-	summary = summary + text
-
-def set_path(path):
-	current_path = getenv('PATH')
-	if current_path.find('C:\\') > -1: # We are on this platform
-		if path == '':
-			path = ";C:\Program Files\Hewlett-Packard\Sanworks\Element Manager for StorageWorks HSV"
-			path = path + ";C:\Program Files (x86)\Compaq\Hpacucli\Bin"
-			path = path + ";C:\Program Files\Compaq\Hpacucli\Bin"
-		else: path = ';' + path
-	else:	# Unix/Linux, etc
-		if path == '': path = ":/usr/sbin"
-		else: path = ':' + path
-	current_path = "%s%s" % (current_path,path)
-	environ['PATH'] = current_path
-
-
-
-
-def run_hpacucli(type='controllers', controller=None):
-	if type=='controllers':
-		command="hpacucli  controller all show detail"
-	elif type=='logicaldisks' or type=='physicaldisks':
-		if controller.has_key('Slot'):
-			identifier = 'slot=%s' % (controller['Slot'] )
-		else:
-			add_summary( "Controller not found" )
-			end()
-		if type=='logicaldisks':
-			command = "hpacucli  controller %s ld all show detail" % (identifier)
-		if type=='physicaldisks':
-			command = "hpacucli  controller %s pd all show detail" % (identifier)
-	
-	#command="hpacucli  controller slot=1 ld all show detail"
-	#command="hpacucli  controller slot=1 ld all show detail"
-	debug ( command ) 
-	if sudo: command = "sudo " + command
-	output = runCommand(command)
-	# Some basic error checking
-	error_strings = [ 'Permission denied' ]
-	error_strings.append('Error: You need to have administrator rights to continue.')
-	for error in error_strings:
-		if output.find( error ) > -1 and output.find("sudo") != 0:
-			command = "sudo " + command 
-			print command
-			output = runCommand(command)
-	output = output.split('\n')
-	objects = []
-	object = None
-	for i in output:
-		if len(i) == 0: continue
-		if i.strip() == '': continue
-		if type=='controllers' and i[0] != ' ': # No space on first line
-			if object and not object in objects: objects.append(object)
-			object = {}
-			object['name'] = i
-		elif type=='logicaldisks' and i.find('Logical Drive:') > 0:
-			if object and not object in objects: objects.append(object)
-			object = {}
-			object['name'] = i.strip() 
-		elif type=='physicaldisks' and i.find('physicaldrive') > 0:
-			if object and not object in objects: objects.append(object)
-			object = {}
-			object['name'] = i.strip() 
-		else:
-			i = i.strip()
-			if i.find(':') < 1: continue
-			i = i.split(':')
-			if i[0] == '': continue # skip empty lines
-			if len(i) == 1: continue
-			key = i[0].strip()
-			value = ' '.join( i[1:] ).strip()
-			object[key] = value
-	if object and not object in objects: objects.append(object)
-	return objects
-
-controllers = []
-def check_controllers():
-	global controllers
-	status = -1
-	controllers = run_hpacucli()
-	if len(controllers) == 0:
-		add_summary("No Disk Controllers Found. Exiting...")
-		global nagios_state
-		nagios_state = unknown
-		end()
-	add_summary( "Found %s controllers" % ( len(controllers) ) )
-	for i in controllers:
-		controller_status = check(i, 'Controller Status', 'OK' )
-		status = max(status, controller_status)
-		
-		cache_status = check(i, 'Cache Status' )
-		status = max(status, cache_status)
-		
-		controller_serial = 'n/a'
-		cache_serial = 'n/a'
-		if i.has_key('Serial Number'):
-			controller_serial = i['Serial Number']
-		if i.has_key('Cache Serial Number'):
-			cache_serial = i['Cache Serial Number']
-		add_long ( "%s" % (i['name']) )
-		add_long( "- Controller Status: %s (sn: %s)" % ( state[controller_status], controller_serial ) )
-		add_long( "- Cache Status: %s (sn: %s)" % ( state[cache_status], cache_serial ) )
-
-		if controller_status > ok or cache_status > ok:
-			add_summary( ";%s on %s;" % (state[controller_status], i['name']) )
-
-	add_summary(', ')	
-	return status
-
-
-def check_logicaldisks():
-	global controllers
-	if len(controllers) < 1:
-		controllers = run_hpacucli()
-	logicaldisks = []
-	for controller in controllers:
-		for ld in  run_hpacucli(type='logicaldisks', controller=controller):
-			logicaldisks.append ( ld )
-        status = -1
-	add_long("\nChecking logical Disks:" )
-        add_summary( "%s logicaldisks" % ( len(logicaldisks) ) )
-	for i in logicaldisks:
-		ld_status =  check(i, 'Status' )
-		status = max(status, ld_status)
-		
-		mount_point = i['Mount Points']
-		add_long( "- %s (%s) = %s" % (i['name'], mount_point, state[ld_status]) )
-	add_summary(". ")
-
-def check_physicaldisks():
-        global controllers
-	disktype='physicaldisks'
-        if len(controllers) < 1:
-                controllers = run_hpacucli()
-        disks = []
-        for controller in controllers:
-                for disk in  run_hpacucli(type=disktype, controller=controller):
-                        disks.append ( disk )
-        status = -1
-        add_long("\nChecking Physical Disks:" )
-        add_summary( "%s %s" % ( len(disks), disktype ) )
-        for i in disks:
-                disk_status =  check(i, 'Status' )
-                status = max(status, disk_status)
-
-		size = i['Size']
-		firmware = i['Firmware Revision']
-		interface = i['Interface Type']
-		serial = i['Serial Number']
-		model = i['Model']
-                add_long( "- %s, %s, %s = %s" % (i['name'], interface, size, state[disk_status]) )
-		if disk_status > ok:
-			add_long( "-- Replace drive, firmware=%s, model=%s, serial=%s" % (firmware,model, serial))
-	if status > ok:
-		add_summary( "(errors)" )
-        add_summary(". ")
-
-
-def check(object, field, valid_states = ['OK']):
-	state = -1
-	global nagios_status
-	if object.has_key(field):
-		if object[field] in valid_states:
-			state = ok
-		else:
-			state = warning
-	nagios_status = max(nagios_status, state)
-	return state
-
-
-
-def parse_arguments():
-	arguments = argv[1:]
-	while len(arguments) > 0:
-		arg = arguments.pop(0)
-		if arg == '--help':
-			print_help()
-			exit(ok)
-		elif arg == '--path':
-			path = arguments.pop(0)
-			set_path(path)
-		elif arg == '--debug':
-			global debugging
-			debugging = True
-		elif arg == '--sudo':
-			global sudo
-			sudo = True
-		else:
-			print_help()
-			exit(unknown)
-			
-
-
-
-def main():
-	parse_arguments()
-	set_path('')
-	check_controllers()
-	check_logicaldisks()
-	check_physicaldisks()
-	end()	
-
-
-if __name__ == '__main__':
-	main()

check_hpacucli/trunk/nrpe.d/check_hpacucli.cfg

@@ -1,2 +0,0 @@
-command[check_hpacucli]=/usr/lib/nagios/plugins/check_hpacucli.py
-

check_hparray/check_hparray

@@ -81,7 +81,7 @@ check_raid()
 {
         raid_ok=`cat $TEMPFILE |grep -i ok|wc -l`
         raid_warning=`cat $TEMPFILE|grep -i -E  'rebuild|predictive' |wc -l`
-        raid_critical_1=`cat $TEMPFILE|grep -i 'failed|recovery' | wc -l`
+        raid_critical_1=`cat $TEMPFILE|grep -i -E 'failed|recovery' | wc -l`
 
         err_check=`expr $raid_ok + $raid_warning + $raid_critical_1 `
 
@@ -133,7 +133,7 @@ case "$1" in
                 exit 0
                 ;;
 	--all)
-		controllers=`sudo -u root hpacucli controller all show | sed 's/.*Slot \([0-9]*\).*/\1/'`
+		controllers=`sudo -u root $HPACUCLI controller all show | sed 's/.*Slot \([0-9]*\).*/\1/'`
 		for i in $controllers ; do sudo -u root $HPACUCLI controller slot=$i pd all show status;done > $TEMPFILE
 		check_raid
 		;;

check_hpasm/nagios-okplugin-check_hpasm.spec

@@ -0,0 +1,55 @@
+%define debug_package %{nil}
+
+Summary:	A Nagios plugin to check HP Hardware Status 
+Name:		nagios-okplugin-check_hpasm
+Version:	4.1.4
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		http://opensource.is/trac/wiki/check_hpasm
+Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_hpasm/releases/nagios-okplugin-check_hpasm-%{version}.tar.gz
+Requires:	nagios-okconfig-nrpe
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Pall Sigurdsson <palli@opensource.is>
+BuildArch:	noarch
+
+
+
+%description
+A Nagios plugin to check HP Hardware Status
+
+
+%prep
+%setup -q
+
+%build
+perl -pi -e "s|/usr/lib|%{_libdir}|g" sudoers.d/check_hpasm
+perl -pi -e "s|/usr/lib|%{_libdir}|g" nrpe.d/check_hpasm.cfg
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 check_hpasm %{buildroot}%{_libdir}/nagios/plugins/check_hpasm
+install -D -p -m 0440 sudoers.d/check_hpasm %{buildroot}/etc/sudoers.d/check_hpasm
+install -D -p -m 0644 nrpe.d/check_hpasm.cfg %{buildroot}/etc/nrpe.d/check_hpasm.cfg
+
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+#%doc README LICENSE
+#%{_libdir}/nagios/plugins/*
+%{_libdir}/nagios/plugins/check_hpasm
+/etc/sudoers.d/check_hpasm
+/etc/nrpe.d/check_hpasm.cfg
+
+%changelog
+* Fri Oct 03 2014 Tomas Edwardsson <tommi@tommi.org> 4.1.4-1
+- hpasm invalid nrpe check command name (tommi@tommi.org)
+
+* Thu May 15 2014 Tomas Edwardsson <tommi@tommi.org> 4.1.3-1
+- new package built with tito
+
+* Tue Jun 4 2013 Pall Sigurdsson <palli@opensource.is> 4.1.2-1
+- Initial packaging

check_hpasm/nrpe.d/check_hpasm.cfg

@@ -0,0 +1,3 @@
+
+
+command[check_hpasm]=sudo /usr/lib/nagios/plugins/check_hpasm

check_hpasm/sudoers.d/check_hpasm

@@ -0,0 +1,2 @@
+Defaults:nrpe	!requiretty
+nrpe		ALL = (root) NOPASSWD: /usr/lib/nagios/plugins/check_hpasm