Create readme.md

:D

.gitignore

@@ -0,0 +1,9 @@
+*.pyc
+*.swp
+.project
+.pydevproject
+.settings
+pagekite*
+.idea
+MANIFEST
+dist

README.md

@@ -0,0 +1,4 @@
+nagios-plugins
+==============
+
+Small army of nagios-plugins either made or maintained by opinkerfi

check_apcext.pl/check_apcext.pl

@@ -1,4 +1,5 @@
 #!/usr/bin/perl
+# nagios: -epn
 #
 # check_apcext.pl - APC Extra gear monitoring plugin for Nagios
 # 05.02.07 Paul Venezia
@@ -14,6 +15,7 @@ use vars qw/ %opt /;
 use strict;
 
 sub getmasked_values ($$);
+sub f2c ($);
 
 if ($ARGV[0] =~ /(--help|-h|help)/ || !defined$ARGV[0]) {
 	&usage;
@@ -40,11 +42,11 @@ my %rpduamps;
 my %oids = ( 
 	'nbmstemp' => {
 		'label' => 'Temp',
-		'unit'	=> ($metric ? 'degC' : 'degF'),
+		'unit'	=> 'degF',
 		'oidbase' => '.1.3.6.1.4.1.5528.100.4.1.1.1',
 		'sensor_key' => 5,
-		'sensor_val' => 2,
-		'cdef'  => ($metric ? '$val * 0.1' : '($val * .18) + 32')
+		'sensor_val' => 9,
+		#'cdef' => '$val * 0.1'
 		},
 	'nbmshum' => {
 		'label' => 'Humidity',
@@ -94,13 +96,13 @@ my %oids = (
 		},
 	'acscsupair' => {
 		'label' => 'Supply Air',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.8.0',
 		'cdef'  => '$val * .10'
 		},
 	'acscretair' => {
 		'label' => 'Return Air',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.10.0',
 		'cdef'  => '$val * .10'
 		},
@@ -111,19 +113,19 @@ my %oids = (
 		},
 	'acscracktemp' => {
 		'label' => 'Rack Inlet Temp',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.6.0',
 		'cdef'  => '$val * .10'
 		},
 	'acsccondin' => {
 		'label' => 'Cond Inlet Temp',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.30.0',
 		'cdef'  => '$val * .10'
 		},
 	'acsccondout' => {
 		'label' => 'Cond Outlet Temp',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.4.1.2.28.0',
 		'cdef'  => '$val * .10'
 		},
@@ -151,19 +153,19 @@ my %oids = (
 		},
 	'acrcracktemp' => {
 		'label' => 'Rack Inlet Temp',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.6.0',
 		'cdef'  => '$val * .10'
 		},
 	'acrcsupair' => {
 		'label' => 'Supply Air',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.8.0',
 		'cdef'  => '$val * .10'
 		},
 	'acrcretair' => {
 		'label' => 'Return Air',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.10.0',
 		'cdef'  => '$val * .10'
 		},
@@ -182,13 +184,13 @@ my %oids = (
 		},
 	'acrcflenttemp' => {
 		'label' => 'Entering Fluid Temp',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.23.0',
 		'cdef'  => '$val * .10'
 		},
 	'acrcflrettemp' => {
 		'label' => 'Returning Fluid Temp',
-		'unit'	=> 'F',
+		'unit'	=> 'degF',
 		'oid' 	=> '.1.3.6.1.4.1.318.1.1.13.3.2.2.2.25.0',
 		'cdef'  => '$val * .10'
 		},
@@ -367,6 +369,11 @@ if ($param eq "rpduamps") {
 			$fval = $val;
 		}
 
+		if ($metric and $oids{$param}->{unit} eq 'degF') {
+			$oids{$param}->{unit} = 'degC';
+			$fval = sprintf("%.1f", f2c($fval));
+		}
+
 		if ($fval > $crit) {
         		$retval = 2;
 			$outmsg = "CRITICAL";
@@ -417,6 +424,12 @@ APC ACRC In-Row
 
 }
 
+sub f2c($) {
+	my $f = shift;
+
+	return ($f - 32) * (5/9);
+}
+
 sub getmasked_values ($$) {
 	my ($baseoid, $values) = @_;
 

check_apcext.pl/nagios-okplugin-apc.spec

@@ -2,7 +2,7 @@
 
 Summary:	A Nagios plugin to check APC devices
 Name:		nagios-okplugin-apc
-Version:	0.0.3
+Version:	2.1.2
 Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
@@ -11,6 +11,7 @@ Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_apcext.pl/rel
 Requires:	nagios-plugins
 BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
 Packager:	Tomas Edwardsson <tommi@ok.is>
+BuildArch:	noarch
 
 
 %description
@@ -37,6 +38,19 @@ rm -rf %{buildroot}
 %{_libdir}/nagios/plugins/*
 
 %changelog
+* Mon Jun 09 2014 Tomas Edwardsson <tommi@tommi.org> 2.1.2-1
+- Disable embedded perl (tommi@tommi.org)
+
+* Thu Mar 20 2014 Tomas Edwardsson <tommi@tommi.org> 2.1.1-1
+- Merge github.com:opinkerfi/misc (palli@opensource.is)
+- Use the right value for the job nbmstemp (tommi@tommi.org)
+- Fixed metric conversion for all mibs (tommi@opensource.is)
+- Added fahrenheit to celsius conversion (tommi@tommi.org)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 2.1.0-1
+- Version number bumped to 2.1.0 (palli@opensource.is)
+- Added noarch buildarch (tommi@tommi.org)
+
 * Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.3-1
 - new package built with tito
 

check_bl/nagios-okplugin-mailblacklist.spec

@@ -2,8 +2,8 @@
 
 Summary:	A Nagios plugin to check SMTP blacklists
 Name:		nagios-okplugin-mailblacklist
-Version:	0.0.1
-Release:	1%{?dist}
+Version:	1.1
+Release:	2%{?dist}
 License:	GPLv2+
 Group:		Applications/System
 URL:		http://opensource.ok.is/trac/wiki/Nagios-OKPlugin-MailBlacklist
@@ -11,7 +11,8 @@ Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_bl/releases/%
 Requires:	nagios-plugins
 Requires:	nagios-plugins-perl
 BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Packager:	Tomas Edwardsson <tommi@ok.is>
+Packager:	Gardar Thorsteinsson <gardar@ok.is>
+BuildArch:	noarch
 
 
 %description
@@ -21,6 +22,8 @@ Checks DNS Blacklists for existance of hosts
 %setup -q
 perl -pi -e "s|/usr/lib|%{_libdir}|g" check_bl
 
+%global __requires_exclude %{?__requires_exclude:%__requires_exclude}|}^perl\\(utils\\)
+
 %build
 
 
@@ -37,5 +40,17 @@ rm -rf %{buildroot}
 %{_libdir}/nagios/plugins/*
 
 %changelog
+* Fri May 04 2018 Richard Allen <ra@ok.is> 1.1-2
+- Filter out perl-utils dependancy
+
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 1.1-1
+- 
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.0-1
+- Updated buildarch to noarch (tommi@tommi.org)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.2-1
+- new package built with tito
+
 * Mon Mar  1 2010  Tomas Edwardsson <tommi@ok.is> 0.1-1
 - Initial packaging

check_bond/nagios-okplugin-bond.spec

@@ -2,8 +2,8 @@
 
 Summary:	A Nagios plugin to check network bond devices
 Name:		nagios-okplugin-bond
-Version:	0.0.1
-Release:	2%{?dist}
+Version:	0.0.4
+Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
 URL:		http://opensource.ok.is/trac/wiki/Nagios-OKPlugin-Bond
@@ -40,6 +40,16 @@ rm -rf %{buildroot}
 %config(noreplace) %{_sysconfdir}/nrpe.d/check_bond.cfg
 
 %changelog
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 0.0.4-1
+- Merge pull request #5 from pallvalmundsson/check_yum_security_patch (palli-
+  github@minor.is)
+
+* Wed Mar 13 2013 Pall Sigurdsson <palli@opensource.is> 0.0.3-1
+- 
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.2-1
+- new package built with tito
+
 * Sun Oct 16 2011  Tomas Edwardsson <tommi@opensource.is> 0.1-2
 - Added configuration into package
 

check_brocade/nagios-okplugin-brocade.spec

@@ -2,15 +2,15 @@
 
 Summary:	A Nagios plugin to check Brocade devices
 Name:		nagios-okplugin-brocade
-Version:	0.0.3
-Release:	1%{?dist}
+Version:	0.0.5
+Release:	2%{?dist}
 License:	GPLv2+
 Group:		Applications/System
 URL:		http://opensource.ok.is/trac/wiki/Nagios-OKPlugin-Brocade
 Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_brocade/releases/nagios-okplugin-brocade-%{version}.tar.gz
 Requires:	perl-Nagios-Plugin
 BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Packager:	Tomas Edwardsson <tommi@ok.is>
+Packager:	Gardar Thorsteinsson <gardar@ok.is>
 
 
 %description
@@ -20,6 +20,8 @@ Checks Brocade devices
 %setup -q
 perl -pi -e "s|/usr/lib|%{_libdir}|g" check_brocade_env
 
+%global __requires_exclude %{?__requires_exclude:%__requires_exclude}|}^perl\\(utils\\)
+
 %build
 
 
@@ -36,5 +38,14 @@ rm -rf %{buildroot}
 %{_libdir}/nagios/plugins/*
 
 %changelog
+* Fri May 09 2018 Gardar Thorsteinsson <gardar@ok.is> 0.0.5-2
+- filter out perl-utils dep
+
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 0.0.5-1
+- 
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.4-1
+- new package built with tito
+
 * Mon Nov 21 2010  Tomas Edwardsson <tommi@ok.is> 0.0.3-1
 - Initial packaging

check_cifs/check_cifs

@@ -23,7 +23,7 @@ use Nagios::Plugin;
 # Create the Nagios plugin object
 my $np = Nagios::Plugin->new(
         usage => "Usage: %s -H <hostname> -u <username> -p <password> -s <share>",
-        version => "0.01",
+        version => "1.0",
 );
 
 # Add valid arguments

check_cifs/nagios-okplugin-cifs.spec

@@ -2,8 +2,8 @@
 
 Summary:	A Nagios plugin to check CIFS shares
 Name:		nagios-okplugin-cifs
-Version:	0.0.3
-Release:	1%{?dist}
+Version:	1.1
+Release:	2%{?dist}
 License:	GPLv2+
 Group:		Applications/System
 URL:		http://opensource.ok.is/trac/wiki/Nagios-OKPlugin-Brocade
@@ -11,7 +11,8 @@ Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_cifs/releases
 Requires:	perl-Nagios-Plugin
 Requires:	samba-client, krb5-workstation
 BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Packager:	Tomas Edwardsson <tommi@ok.is>
+Packager: Gardar Thorsteinsson <gardar@ok.is>	
+BuildArch:	noarch
 
 
 %description
@@ -22,6 +23,8 @@ NTML authentication
 %setup -q
 perl -pi -e "s|/usr/lib|%{_libdir}|g" check_cifs
 
+%global __requires_exclude %{?__requires_exclude:%__requires_exclude}|}^perl\\(utils\\)
+
 %build
 
 
@@ -38,5 +41,18 @@ rm -rf %{buildroot}
 %{_libdir}/nagios/plugins/*
 
 %changelog
+* Fri May 09 2018 Gardar Thorsteinsson <gardar@ok.is> 1.1-2
+- Filter out perl-utils dep
+
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 1.1-1
+- Merge github.com:opinkerfi/misc (palli@opensource.is)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.0-1
+- version number of scripts bumped (palli@opensource.is)
+- Updates buildarch to noarch (tommi@tommi.org)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.4-1
+- new package built with tito
+
 * Mon Nov 21 2010  Tomas Edwardsson <tommi@ok.is> 0.0.3-1
 - Initial packaging

check_cpu.py/nagios-okplugin-check_cpu.spec

@@ -0,0 +1,59 @@
+%define debug_package %{nil}
+
+Summary:	A Nagios plugin to check CPU on Linux servers
+Name:		nagios-okplugin-check_cpu
+Version:	1.1
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		https://github.com/opinkerfi/nagios-plugins/
+Source0:	https://github.com/opinkerfi/nagios-plugins/archive/%{name}-%{version}-%{release}.tar.gz
+Requires:	nagios-okplugin-common
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Tomas Edwardsson <tommi@tommi.org>
+BuildArch:	noarch
+
+%description
+Check cpu states on line machines
+
+%prep
+%setup -q
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 okplugin_check_cpu %{buildroot}%{_libdir}/nagios/plugins/okplugin_check_cpu
+install -D -p -m 0755 nrpe.d/okplugin_check_cpu.cfg %{buildroot}/etc/nrpe.d/okplugin_check_cpu.cfg
+
+
+%clean
+rm -rf %{buildroot}
+
+%post
+/sbin/service nrpe reload
+
+%files
+%defattr(-,root,root,-)
+%{_libdir}/nagios/plugins/*
+%{_sysconfdir}/nrpe.d/*
+
+
+
+%changelog
+* Mon Jan 20 2014 Tomas Edwardsson <tommi@tommi.org> 1.1-1
+- new package built with tito
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.0-1
+- Version number bumped
+- Updates buildarch to noarch (tommi@tommi.org)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.3-1
+- new package built with tito
+
+* Thu Nov 25 2010  Pall Sigurdsson <palli@opensource.is> 0.1-2
+- Nrpe config now ships with plugin by default
+* Mon Mar  1 2010  Tomas Edwardsson <tommi@ok.is> 0.1-1
+- Initial packaging
+

check_cpu.py/nrpe.d/okplugin_check_cpu.cfg

@@ -0,0 +1 @@
+command[okplugin_check_cpu]=/usr/lib/nagios/plugins/okplugin_check_cpu

check_cpu.py/okplugin_check_cpu

@@ -0,0 +1,131 @@
+#!/usr/bin/python
+#
+# Copyright 2014, Tomas Edwardsson
+#
+# This program is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+"""
+Gathers information on cpu usage on a linux machine
+
+It returns performance data for both the last 5 seconds and from last run.
+"""
+
+from pynag.Plugins import PluginHelper, ok, unknown
+import os
+import time
+
+
+def main():
+    """The main logic of the program"""
+
+    # See man proc and search for /proc/stat
+    stat_fields = ['cpu', 'user', 'nice', 'system', 'idle', 'iowait', 'irq',
+                   'softirq', 'steal', 'guest', 'guest_nice']
+
+    pyplug = PluginHelper()
+
+    # Get the statistics from last run
+    old_stat = get_saved_stat()
+
+    # Get current state
+    stat = get_stat()
+
+    # Resample
+    time.sleep(5)
+    stat2 = get_stat()
+
+    try:
+        save_stat(stat)
+    except IOError, err:
+        pyplug.exit(unknown, "Unable to save cpu statistics: %s" % err)
+
+
+    # Calculate averages for the last few seconds
+    current_averages = diff_stats(stat2, stat)
+    for pos in range(len(current_averages)):
+        pyplug.add_metric(label=stat_fields[pos+1],
+                          value=current_averages[pos],
+                          uom="%")
+
+    # Calculate averages from last run
+    if old_stat:
+        last_run_avg = diff_stats(old_stat, stat)
+        for pos in range(len(current_averages)):
+            pyplug.add_metric(label=stat_fields[pos+1]+"_avg",
+                              value=last_run_avg[pos],
+                              uom="%")
+
+    pyplug.add_status(ok)
+    pyplug.add_summary("CPU load %.2f%%" % (100.0 - current_averages[3]))
+    pyplug.exit()
+
+def diff_stats(older, newer):
+    """Calculates the percentage between two stat arrays"""
+    if older:
+        diff = []
+        for pos in range(len(newer)):
+            diff.append(newer[pos] - older[pos])
+        averages =  calc_avg(diff)
+    else:
+        averages =  calc_avg(newer)
+
+    return averages
+
+
+def remove_stale_state():
+    """Removes the last state file if we have rebooted"""
+
+    try:
+        state_mtime = os.stat("/var/lib/nagios-okplugin/check_cpu").st_mtime
+        boot_time = os.stat("/proc/1").st_mtime
+        if state_mtime < boot_time:
+            os.unlink("/var/lib/nagios-okplugin/check_cpu")
+    except OSError:
+        return None
+
+    return state_mtime
+
+def calc_avg(stat):
+    """Calculates the average of each int in array"""
+    stat_sum = sum(stat)
+    avg = []
+    for pos in range(len(stat)):
+        avg.append(float(stat[pos]) / stat_sum * 100)
+    return avg
+
+def get_stat():
+    """Fetches the first line from /proc/stat and returns the numbers"""
+    stat_fh = open("/proc/stat")
+    return [int(pos) for pos in stat_fh.readline().split()[1:]]
+
+def get_saved_stat():
+    """Fetches information about the last run to be able to do averages"""
+
+    remove_stale_state()
+    try:
+        stat_fh = open("/var/lib/nagios-okplugin/check_cpu")
+    except IOError:
+        return None
+    return [int(pos) for pos in stat_fh.readline().split()[1:]]
+
+def save_stat(stat):
+    """Save statistics to compare to in next run"""
+    stat_fh = open("/var/lib/nagios-okplugin/check_cpu", "w")
+
+    stat_fh.write("cpu " + " ".join([str(pos) for pos in stat]) + "\n")
+    stat_fh.close()
+
+if __name__ == "__main__":
+    main()
+
+# vim: sts=4 expandtab

check_cpu.sh/check_cpu.sh

@@ -167,6 +167,11 @@ must be lower than the critical level!"
         exit $ST_UK
     fi
 fi
+which bc >> /dev/null
+if [ $? -gt 0 ]; then
+	echo "UNKNOWN - command 'bc' not found in path. Exiting..."
+	exit 3
+fi
 
 get_cpuvals
 do_output

check_cpu.sh/nagios-plugins-check_cpu.spec

@@ -2,15 +2,16 @@
 
 Summary:	A Nagios plugin to check CPU on Linux servers
 Name:		nagios-plugins-check_cpu
-Version:	0.2
+Version:	2
 Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
 URL:		http://www.matejunkie.com/cpu-check-plugin-for-nagios/
 Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_cpu/releases/nagios-plugins-check_cpu-%{version}.tar.gz
-Requires:	nrpe
+Requires:	nrpe bc
 BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
 Packager:	Tomas Edwardsson <tommi@ok.is>
+BuildArch:	noarch
 
 %description
 This shell script checks cpu utilization (user,system,iowait,idle in %) 
@@ -33,6 +34,9 @@ install -D -p -m 0755 nrpe.d/check_cpu.cfg %{buildroot}/etc/nrpe.d/check_cpu.cfg
 %clean
 rm -rf %{buildroot}
 
+%post
+/sbin/service nrpe reload
+
 %files
 %defattr(-,root,root,-)
 #%doc README LICENSE
@@ -41,6 +45,18 @@ rm -rf %{buildroot}
 
 
 %changelog
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 2-1
+- Added nrpe reload to post section (tommi@tommi.org)
+- Merge github.com:opinkerfi/misc (palli@opensource.is)
+- Added dependency on bc (palli@opensource.is)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.0-1
+- Version number bumped
+- Updates buildarch to noarch (tommi@tommi.org)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.3-1
+- new package built with tito
+
 * Thu Nov 25 2010  Pall Sigurdsson <palli@opensource.is> 0.1-2
 - Nrpe config now ships with plugin by default
 * Mon Mar  1 2010  Tomas Edwardsson <tommi@ok.is> 0.1-1

check_dataprotector/check_dp_tablespace

@@ -64,7 +64,6 @@ def check_tablespaces():
 		global default_warning_threshold
 		global nagios_status
 		warn = default_warning_threshold
-		warn = 60
 		max_size = i['max_size'] * 1024
 		curr_size = i['curr_size'] * 1024
 		occupancy = 100.0 * curr_size / max_size 

check_dataprotector/nagios-okplugin-check_dataprotector.spec

@@ -2,7 +2,7 @@
 
 Summary:	Nagios Plugins to monitor HP Dataprotector
 Name:		nagios-okplugin-check_dataprotector
-Version:	1.0.0
+Version:	2
 Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
@@ -45,5 +45,12 @@ rm -rf %{buildroot}
 /etc/nrpe.d/check_dataprotector.cfg
 
 %changelog
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 2-1
+- removed warning threshold of 60 (palli@opensource.is)
+- contrib removed from plugin path (palli@opensource.is)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 1.0.1-1
+- new package built with tito
+
 * Mon Sep  15 2010  Pall Sigurdsson <palli@opensource.is> 0.1-1
 - Initial packaging

check_dataprotector/nrpe.d/check_dataprotector.cfg

@@ -1,7 +1,8 @@
 
 
-command[check_dp_pool]=/usr/lib/nagios/plugins/contrib/check_dp_pool "$ARG1$"
-command[check_dp_tablespace]=/usr/lib/nagios/plugins/contrib/check_dp_tablespace
-command[check_dp_services]=/usr/lib/nagios/plugins/contrib/check_dp_services
-command[check_dp_mountrequest]=/usr/lib/nagios/plugins/contrib/check_dp_mountrequest
-command[check_dp_idb]=/usr/lib/nagios/plugins/contrib/check_dp_idb
+command[check_dp_pool]=/usr/lib/nagios/plugins/check_dp_pool "$ARG1$"
+command[check_dp_tablespace]=/usr/lib/nagios/plugins/check_dp_tablespace
+command[check_dp_services]=/usr/lib/nagios/plugins/check_dp_services
+command[check_dp_mountrequest]=/usr/lib/nagios/plugins/check_dp_mountrequest
+command[check_dp_idb]=/usr/lib/nagios/plugins/check_dp_idb
+command[check_dp_backups]=/usr/lib/nagios/plugins/check_dp_backups

check_disks.pl/check_disks.pl

@@ -24,6 +24,7 @@
      -h | --help     : Display this help
      -w | --warning  : % free space to send warning alert (default 10)
      -c | --critical : % free space to send critical alert (default 5)
+     -I | --inodes  : Check for inodes
      -H | --host     : host you want to check by NRPE (default localhost)
      -u | --user     : user for NRPE connection (default nagios)
      -i | --ignore   : Filesystem you want to ignore
@@ -94,6 +95,9 @@ not be used.
 
     $Log: check_disk.pl,v $
 
+    Revision 1.10 2013/03/01 14:28:00 tryggvi@ok.is
+    o Added support for inodes
+
     Revision 1.9 2010/02/27 00:55:00   palli@ok.is
     o Changed UNKNOWN return code from -1 to 3
     o Modified to use check_nrpe instead of ssh
@@ -129,7 +133,7 @@ use Pod::Usage;
 use strict;
 
 my ($opt_c, $opt_w, $opt_h, $opt_i,$opt_f,$opt_s,$opt_u,$opt_H,$opt_C,$opt_v,
-    $opt_html, $opt_srvperf, $opt_r, $opt_R);
+    $opt_html, $opt_srvperf, $opt_r, $opt_R, $opt_inodes);
 
 $ENV{'PATH'} = "/usr/lib/nagios/plugins:/usr/lib64/nagios/plugins:/usr/local/libexec:/usr/libexec:/usr/local/nagios/libexec";
 
@@ -140,12 +144,13 @@ $opt_c = "5";       # Valeur par defaut de critical
 $opt_H = "localhost";
 $opt_R = q/^$/;
 $opt_r = "";
+my $cmd = "/bin/df -k";
+my $multiply = 1024; # For bytes
 
 my $exclude_re = "(^//|^none)";
 
 my %alldisks; # Tous les disques trouves avec la commande df
 my %checkdisks; # seulement les disque a verifier
-my $cmd = "/bin/df -k";
 my $output ;
 my $retour = 'OK';
 my %EXIT_CODES = (
@@ -168,6 +173,7 @@ GetOptions(
         "i=s" => \$opt_i,   "ignore=s"            => \$opt_i,
         "f=s" => \$opt_f,   "filesystem=s"        => \$opt_f,
         "C=s" => \$opt_C,   "conf=s"              => \$opt_C,
+        "I" => \$opt_inodes,   "inodes"              => \$opt_inodes,
         "v"   => \$opt_v,   "verbose"             => \$opt_v,
         "r=s" => \$opt_r,   "R=s"                 => \$opt_R,
         "html"   => \$opt_html,
@@ -197,26 +203,37 @@ my $args;
 #           ->{critical} : taux critique en % espace libre
 #
 
+if(defined($opt_inodes)){
+    # Using -i for inodes
+    $cmd = "/bin/df -i";
+    $multiply = 1000;
+}
+
 #Si on est en local inutile de faire du nrpe
 if($opt_H ne "localhost" and $opt_H ne "127.0.0.1") {
     #$cmd = "ssh $opt_u\@$opt_H '$cmd'";
-    $cmd = "check_nrpe -H $opt_H -c get_disks";
+    if(defined($opt_inodes)){
+        $cmd = "check_nrpe -H $opt_H -c get_disks_inodes";
+    } else {
+        $cmd = "check_nrpe -H $opt_H -c get_disks";
+    }
     #$cmd = "cat /tmp/df";
     #print "$cmd";
 }
 
 # Envoi commande et renseignement Hashage %disks
 my @output = `$cmd`;
+
 my $ret = $?;
+$ret >>= 8;
 
 if ($ret == -1) {
 	print "Could not find " . (split(' ', $cmd))[0] . "\n";
 	exit $EXIT_CODES{'UNKNOWN'};
 }
 
-$ret >>= 8;
 # 2010/02/25 palli@ok.is : Check if $cmd ran successfully
-if ($ret > 0) {
+if ($ret > 1) {
    print "Failed to execute $cmd: " . join("\n", @output) . "\n";
    exit $EXIT_CODES{'UNKNOWN'} ;
 }
@@ -234,16 +251,16 @@ if ($ret > 0) {
 #
 
 foreach my $l (@output) {
+    next if ($l =~ m/$opt_R/);
+    next if ($l !~ m/$opt_r/);
+    next if ($l =~ m/$exclude_re/);
     if($l =~ /(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\%\s+([\/\w\d\.-]+)$/) {
-        next if ($l =~ m/$opt_R/);
-        next if ($l !~ m/$opt_r/);
-        next if ($l =~ m/$exclude_re/);
         my ($s,$u,$f,$pu,$d) = ($1,$2,$3,$4,$5);
         $alldisks{$d}->{pused} = $pu;
         $alldisks{$d}->{pfree} = 100-$pu;
-        $alldisks{$d}->{somme} = $s*1024;
-        $alldisks{$d}->{used} = $u*1024;
-        $alldisks{$d}->{free} = $f*1024;
+        $alldisks{$d}->{somme} = $s*$multiply;
+        $alldisks{$d}->{used} = $u*$multiply;
+        $alldisks{$d}->{free} = $f*$multiply;
 
         # par defaut on prend les taux Warn et Crit specifies
         updateRates($d,$opt_w,$opt_c,$alldisks{$d}->{somme});
@@ -251,16 +268,16 @@ foreach my $l (@output) {
 # This is the output of df.exe on Windows
 #C:\    9097126      6094081      3003045    67% argon-c (ntfs)
     else {
-	if ($l =~ /(\w)\:\\\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\%\s+(.*)$/) {
         next if ($l =~ m/$opt_R/);
         next if ($l !~ m/$opt_r/);
         next if ($l =~ m/$exclude_re/);
+	if ($l =~ /(\w)\:\\\s+(\d+)\s+(\d+)\s+(\d+)\s+(\d+)\%\s+(.*)$/) {
         my ($d,$s,$u,$f,$pu) = ("/$1",$2,$3,$4,$5);
         $alldisks{$d}->{pused} = $pu;
         $alldisks{$d}->{pfree} = 100-$pu;
-        $alldisks{$d}->{somme} = $s*1024;
-        $alldisks{$d}->{used} = $u*1024;
-        $alldisks{$d}->{free} = $f*1024;
+        $alldisks{$d}->{somme} = $s*$multiply;
+        $alldisks{$d}->{used} = $u*$multiply;
+        $alldisks{$d}->{free} = $f*$multiply;
 	#print $l;
 	#print "pused = $pu\n";
 	#print "pfree = 100-$pu\n";
@@ -307,7 +324,7 @@ if($opt_f) {
             if(defined($alldisks{$f})) {
                 $checkdisks{$f}=$alldisks{$f};
             }
-        } elsif ($f =~ /([\/\w\d]+)\:(\w+)\:(\w+)/) {
+        } elsif ($f =~ /^(.+?)\:(\w+)\:(\w+)/) {
             if(defined($alldisks{$1})) {
                 $checkdisks{$1}=$alldisks{$1};
                 updateRates($1,$2,$3,$checkdisks{$1}->{somme});
@@ -437,14 +454,15 @@ sub byte2percent {
         print "Erreur : unite inconnue ($unit)\n";
         return 0;
     }
+
     if($unit eq 'K') {
-        $return = sprintf("%d",100*(1024*$value)/$max);
+        $return = sprintf("%d",100*($multiply*$value)/$max);
     } elsif ($unit eq 'M') {
-        $return = sprintf("%d",100*(1024*1024*$value)/$max);
+        $return = sprintf("%d",100*($multiply*$multiply*$value)/$max);
     } elsif ($unit eq 'G') {
-        $return = sprintf("%d",100*(1024*1024*1024*$value)/$max);
+        $return = sprintf("%d",100*($multiply*$multiply*$multiply*$value)/$max);
     } elsif ($unit eq 'T') {
-        $return = sprintf("%d",100*(1024*1024*1024*1024*$value)/$max);
+        $return = sprintf("%d",100*($multiply*$multiply*$multiply*$multiply*$value)/$max);
     }
     #Borne a 100 %
     if($return > 100) { 
@@ -459,8 +477,8 @@ sub byte2human {
 
     my @units = qw/B K M G T/;
 
-    while (($value / 1024) >= 1) {
-	$value /= 1024;
+    while (($value / $multiply) >= 1) {
+	$value /= $multiply;
 	$i++;
     }
     return sprintf('%.1f%s',$value, $units[$i]);

check_disks.pl/nagios-okplugin-check_disks.spec

@@ -2,8 +2,8 @@
 
 Summary:	A Nagios plugin to check disks via NRPE
 Name:		nagios-okplugin-check_disks
-Version:	1.0.0
-Release:	2%{?dist}
+Version:	1.0.7
+Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
 URL:		http://opensource.is/trac/wiki/check_disks
@@ -40,6 +40,29 @@ rm -rf %{buildroot}
 %{_libdir}/nagios/plugins/check_disks.pl
 
 %changelog
+* Wed Oct 29 2014 Tomas Edwardsson <tommi@tommi.org> 1.0.7-1
+- Fix invalid regex if mountpoint has . in path (tommi@tommi.org)
+- Regex filtering broke disk checks (tommi@tommi.org)
+
+* Tue Mar 25 2014 Tomas Edwardsson <tommi@tommi.org> 1.0.6-1
+- Bumped version
+
+* Tue Mar 25 2014 Tomas Edwardsson <tommi@tommi.org> 1.0.5-1
+- Added support for inodes (tryggvi@linux.is)
+
+* Sat Mar 02 2013 Tryggvi Farestveit <tryggvi@linux.is> 1.0.4-1
+- Added support for inodes
+
+* Wed May 16 2012 Tomas Edwardsson <tommi@tommi.org> 1.0.3-1
+- Updated version of nagios-okplugin-check_disks (tommi@tommi.org)
+- Issue #56, temporary fix for selinux and disk checks (tommi@tommi.org)
+
+* Mon May 16 2012 Tomas Edwardsson <tommi@opensource.is> 1.0.2-1
+- Ignore warning states from nrpe
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 1.0.1-1
+- new package built with tito
+
 * Sun Oct 16 2011  Tomas Edwardsson <tommi@opensource.is> 0.1-2
 - Fixed dependencies and build arch
 

check_drbd/nagios-okplugin-check_drbd.spec

@@ -0,0 +1,59 @@
+%define debug_package %{nil}
+
+%define plugin_name	check_drbd
+
+
+Summary:	A Nagios plugin to check Linux Devicemapper Multipathing
+Name:		nagios-okplugin-%{plugin_name}
+Version:	0.0.4
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		http://opensource.is/trac/wiki/%{plugin_name}
+Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/%{plugin_name}/releases/%{name}-%{version}.tar.gz
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Pall Sigurdsson <palli@opensource.is>
+
+
+%description
+%{summary}
+
+%prep
+%setup -q
+perl -pi -e "s|/usr/lib|%{_libdir}|g" nrpe.d/%{plugin_name}.cfg
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 check_drbd %{buildroot}%{_libdir}/nagios/plugins/check_drbd
+install -D -p -m 0755 nrpe.d/%{plugin_name}.cfg %{buildroot}/etc/nrpe.d/%{plugin_name}.cfg
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+#%doc README LICENSE
+%{_libdir}/nagios/plugins/*
+/etc/nrpe.d/%{plugin_name}.cfg
+
+%changelog
+* Wed Mar 14 2012 Pall Sigurdsson <palli@opensource.is> 0.0.4-1
+- licence and readme removed from specfile (palli@opensource.is)
+
+* Wed Mar 14 2012 Pall Sigurdsson <palli@opensource.is>
+- licence and readme removed from specfile (palli@opensource.is)
+
+* Wed Mar 14 2012 Pall Sigurdsson <palli@opensource.is>
+- licence and readme removed from specfile (palli@opensource.is)
+
+* Wed Mar 14 2012 Pall Sigurdsson <palli@opensource.is>
+- licence and readme removed from specfile (palli@opensource.is)
+
+* Wed Mar 14 2012 Pall Sigurdsson <palli@opensource.is> 0.0.3-1
+- new package built with tito
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.2-1
+- new package built with tito

check_emc_clariion/check_emc_clariion.pl

@@ -288,7 +288,7 @@ sub check_disk {
 	}
 	close (NAVICLIOUT);
 	if ($disk_ok_count eq 0) {
-		print "No disk were founded !\n";
+		print "No disk were found !\n";
 		$state = 'UNKNOWN';
 	} elsif ($crit_count > 0) {
 		$state='CRITICAL';

check_eva/nagios-okplugin-check_eva.spec

@@ -2,7 +2,7 @@
 
 Summary:	A Nagios plugin to check HP EVA Disk Systems
 Name:		nagios-okplugin-check_eva
-Version:	1.0.0
+Version:	2
 Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
@@ -40,5 +40,28 @@ rm -rf %{buildroot}
 /etc/nrpe.d/check_eva.cfg
 
 %changelog
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 2-1
+- Merge pull request #10 from gitmopp/patch-2 (palli-github@minor.is)
+- bug in for loop. Looped only once (mopp@gmx.net)
+- Fixed output to be more compatible (mopp@gmx.net)
+- check_eva new Make sure --timeout is an integer (palli@opensource.is)
+- check_eva new command line option --timeout (palli@opensource.is)
+- check_eva Fix undefined fix typos (palli@opensource.is)
+- PEP8 cleanup (palli@opensource.is)
+- merged (palli@opensource.is)
+- check_eva - minor bugfixes (palli@opensource.is)
+- check_eva.py more code cleanup with pycharm inspections (palli@opensource.is)
+- check_eva.py - Make code more readable (palli@opensource.is)
+- convert from tabs to spaces (palli@opensource.is)
+- check_eva - fix mixed tab/spaces (palli@opensource.is)
+- Update check_eva.py (sander.grendelman@gmail.com)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.0.2-1
+- changed sssu subcommands from being singlequoted to doublequoted for windows
+  compatibility (palli@opensource.is)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 1.0.1-1
+- new package built with tito
+
 * Mon Mar  1 2010  Pall Sigurdsson <palli@opensource.is> 0.1-1
 - Initial packaging

check_firewall_active/check_firewall_active.sh

@@ -0,0 +1,23 @@
+#!/bin/bash
+
+EXIT_OK=0
+EXIT_WARN=1
+EXIT_CRIT=2
+
+PATH=/sbin:/usr/sbin:$PATH
+
+if [ "$(id -u)" != "0" ]; then
+	echo "This script must be run as root" 1>&2
+	exit $EXIT_CRIT
+fi
+
+blocks=$(iptables -L -v -n | egrep 'REJECT|DROP' | wc -l)
+
+if [ $blocks -eq 0 ]; then
+	echo "CRITICAL: No firewall detected"
+	exit $EXIT_CRIT
+fi
+
+echo "OK: Firewall is active"
+exit $EXIT_OK
+

check_firewall_active/nagios-okplugin-check_firewall_active.spec

@@ -0,0 +1,52 @@
+%define debug_package %{nil}
+
+Summary:	A Nagios plugin to check if iptables are actually enforcing rules
+Name:		nagios-okplugin-check_firewall_active
+Version:	1.0.2
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		https://github.com/opinkerfi/nagios-plugins/issues
+Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_firewall_active/releases/nagios-okplugin-check_firewall_active-%{version}.tar.gz
+Requires:	nagios-nrpe
+Requires:	iptables
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Richard Allen <ra@ok.is>
+
+
+
+%description
+A Nagios plugin to check if iptables are actually enforcing rules
+
+
+%prep
+%setup -q
+#perl -pi -e "s|/usr/lib64|%{_libdir}|g" nrpe.d/check_firewall_active.cfg
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 check_firewall_active.sh %{buildroot}%{_libdir}/nagios/plugins/check_firewall_active.sh
+install -D -p -m 0755 nrpe.d/check_firewall_active.cfg %{buildroot}/etc/nrpe.d/check_firewall_active.cfg
+install -D -p -m 0644 sudoers.d/check_firewall_active %{buildroot}/etc/sudoers.d/check_firewall_active
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+#%doc README LICENSE
+%{_libdir}/nagios/plugins/*
+/etc/nrpe.d/check_firewall_active.cfg
+/etc/sudoers.d/check_firewall_active
+
+%post
+restorecon -v %{_libdir}/nagios/plugins/check_firewall_active.sh /etc/nrpe.d/check_firewall_active.cfg /etc/sudoers.d/check_firewall_active
+
+%changelog
+* Thu Dec 21 2016  Gardar Thorsteinsson <gardart@gmail.com> 1.0.1-1
+* Thu Dec 21 2016  Gardar Thorsteinsson <gardart@gmail.com> 1.0.0-3
+* Thu Dec 20 2016  Richard Allen <ra@ok.is> 0.1-1
+- Initial packaging

check_firewall_active/nrpe.d/check_firewall_active.cfg

@@ -0,0 +1,3 @@
+
+
+command[check_firewall_active]=sudo /usr/lib64/nagios/plugins/check_firewall_active.sh

check_firewall_active/sudoers.d/check_firewall_active

@@ -0,0 +1,2 @@
+Defaults:nrpe	!requiretty
+nrpe		ALL = (root) NOPASSWD: /usr/lib64/nagios/plugins/check_firewall_active.sh

check_hpacucli/check_hpacucli.py

@@ -16,26 +16,22 @@
 # along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 # About this script
-# 
+#
 # This script will check the status of Smart Array Raid Controller
-# You will need the hpacucli binary in path (/usr/sbin/hpacucli is a good place)
+# You need the hpacucli binary in path (/usr/sbin/hpacucli is a good place)
 # hpacucli comes with the Proliant Support Pack (PSP) from HP
 
 debugging = False
 
-
-
 # No real need to change anything below here
-version="1.0"
-ok=0
-warning=1
-critical=2
-unknown=3 
-not_present = -1 
+version = "1.1"
+ok = 0
+warning = 1
+critical = 2
+unknown = 3
+not_present = -1
 nagios_status = -1
 
-
-
 state = {}
 state[not_present] = "Not Present"
 state[ok] = "OK"
@@ -44,286 +40,323 @@ state[critical] = "Critical"
 state[unknown] = "Unknown"
 
 
-longserviceoutput="\n"
-perfdata=""
-summary=""
-sudo=False
+longserviceoutput = "\n"
+perfdata = ""
+summary = ""
+sudo = False
 
 
 from sys import exit
 from sys import argv
-from os import getenv,putenv,environ
+from os import getenv, putenv, environ
 import subprocess
 
 
-
 def print_help():
-        print "check_hpacucli version %s" % version
-        print "This plugin checks HP Array with the hpacucli command"
-        print ""
-        print "Usage: %s " % argv[0]
-        print "Usage: %s [--help]" % argv[0]
-        print "Usage: %s [--version]" % argv[0]
-        print "Usage: %s [--path </path/to/hpacucli>]" % argv[0]
-        print "Usage: %s [--no-perfdata]" % argv[0]
-        print "Usage: %s [--no-longoutput]" % argv[0]
-        print  ""
+    print "check_hpacucli version %s" % version
+    print "This plugin checks HP Array with the hpacucli command"
+    print ""
+    print "Usage: %s " % argv[0]
+    print "Usage: %s [--help]" % argv[0]
+    print "Usage: %s [--version]" % argv[0]
+    print "Usage: %s [--path </path/to/hpacucli>]" % argv[0]
+    print "Usage: %s [--no-perfdata]" % argv[0]
+    print "Usage: %s [--no-longoutput]" % argv[0]
+    print  ""
 
 
 def error(errortext):
-        print "* Error: %s" % errortext
-        print_help()
-        print "* Error: %s" % errortext
-        exit(unknown)
-
-def debug( debugtext ):
-        global debugging
-        if debugging:
-                print  debugtext
+    print "* Error: %s" % errortext
+    print_help()
+    print "* Error: %s" % errortext
+    exit(unknown)
+
+
+def debug(debugtext):
+    global debugging
+    if debugging:
+        print  debugtext
 
 
-'''runCommand: Runs command from the shell prompt. Exit Nagios style if unsuccessful'''
 def runCommand(command):
-  proc = subprocess.Popen(command, shell=True, stdout=subprocess.PIPE,stderr=subprocess.PIPE,)
-  stdout, stderr = proc.communicate('through stdin to stdout')
-  if proc.returncode > 0:
-    print "Error %s: %s\n command was: '%s'" % (proc.returncode,stderr.strip(),command)
-    debug("results: %s" % (stdout.strip() ) )
-    if proc.returncode == 127: # File not found, lets print path
-        path=getenv("PATH")
+    """ Run command from the shell prompt. Exit Nagios style if unsuccessful"""
+    proc = subprocess.Popen(command,
+                            shell=True,
+                            stdout=subprocess.PIPE,
+                            stderr=subprocess.PIPE,
+                            )
+    stdout, stderr = proc.communicate('through stdin to stdout')
+    if proc.returncode > 0:
+        print "Error %s: %s\n command was: '%s'"\
+              % (proc.returncode, stderr.strip(), command)
+    debug("results: %s" % (stdout.strip()))
+    if proc.returncode == 127:  # File not found, lets print path
+        path = getenv("PATH")
         print "Check if your path is correct %s" % (path)
     if stderr.find('Password:') == 0 and command.find('sudo') == 0:
-      print "Check if user is in the sudoers file"
+        print "Check if user is in the sudoers file"
     if stderr.find('sorry, you must have a tty to run sudo') == 0 and command.find('sudo') == 0:
-      print "Please remove 'requiretty' from /etc/sudoers"
-    exit(unknown)
-  else:
-    return stdout
+        print "Please remove 'requiretty' from /etc/sudoers"
+        exit(unknown)
+    else:
+        return stdout
+
 
 def end():
-	global summary
-	global longserviceoutput
-	global perfdata
-	global nagios_status
-        print "%s - %s | %s" % (state[nagios_status], summary,perfdata)
-        print longserviceoutput
-	if nagios_status < 0: nagios_status = unknown
-        exit(nagios_status)
+    global summary
+    global longserviceoutput
+    global perfdata
+    global nagios_status
+    print "%s - %s | %s" % (state[nagios_status], summary, perfdata)
+    print longserviceoutput
+    if nagios_status < 0:
+        nagios_status = unknown
+    exit(nagios_status)
+
 
 def add_perfdata(text):
-        global perfdata
-        text = text.strip()
-        perfdata = perfdata + " %s " % (text)
+    global perfdata
+    text = text.strip()
+    perfdata = perfdata + " %s " % (text)
+
 
 def add_long(text):
-        global longserviceoutput
-        longserviceoutput = longserviceoutput + text + '\n'
+    global longserviceoutput
+    longserviceoutput = longserviceoutput + text + '\n'
+
 
 def add_summary(text):
-	global summary
-	summary = summary + text
+    global summary
+    summary = summary + text
+
 
 def set_path(path):
-	current_path = getenv('PATH')
-	if current_path.find('C:\\') > -1: # We are on this platform
-		if path == '':
-			path = ";C:\Program Files\Hewlett-Packard\Sanworks\Element Manager for StorageWorks HSV"
-			path = path + ";C:\Program Files (x86)\Compaq\Hpacucli\Bin"
-			path = path + ";C:\Program Files\Compaq\Hpacucli\Bin"
-		else: path = ';' + path
-	else:	# Unix/Linux, etc
-		if path == '': path = ":/usr/sbin"
-		else: path = ':' + path
-	current_path = "%s%s" % (current_path,path)
-	environ['PATH'] = current_path
+    current_path = getenv('PATH')
+    if current_path.find('C:\\') > -1:  # We are on this platform
+        if path == '':
+            path = ";C:\Program Files\Hewlett-Packard\Sanworks\Element Manager for StorageWorks HSV"
+            path = path + ";C:\Program Files (x86)\Compaq\Hpacucli\Bin"
+            path = path + ";C:\Program Files\Compaq\Hpacucli\Bin"
+        else:
+            path = ';' + path
+    else:  # Unix/Linux, etc
+        if path == '':
+            path = ":/usr/sbin"
+        else:
+            path = ':' + path
+    current_path = "%s%s" % (current_path, path)
+    environ['PATH'] = current_path
 
 
+def run_hpacucli(run_type='controllers', controller=None):
+    if run_type == 'controllers':
+        command = "hpacucli  controller all show detail"
+    elif run_type in ('logicaldisks', 'physicaldisks'):
+        if 'Slot' not in controller:
+            add_summary("Controller not found")
+            end()
+        identifier = 'slot=%s' % (controller['Slot'])
+        command = "hpacucli  controller %s %s all show detail"
+        if run_type == 'logicaldisks':
+            subcommand = 'ld'
+        elif run_type == 'physicaldisks':
+            subcommand = 'pd'
+        else:
+            end()
+            return
+        command = command % (identifier, subcommand)
+    debug(command)
+    if sudo:
+        command = "sudo " + command
+    output = runCommand(command)
+    # Some basic error checking
+    error_strings = ['Permission denied']
+    error_strings.append('Error: You need to have administrator rights to continue.')
+    for error in error_strings:
+        if output.find(error) > -1 and output.find("sudo") != 0:
+            command = "sudo " + command
+            print command
+            output = runCommand(command)
+    output = output.split('\n')
+    objects = []
+    my_object = None
+    for i in output:
+        if len(i) == 0:
+            continue
+        if i.strip() == '':
+            continue
+        if i.startswith('Note:'):
+            continue
+        if run_type == 'controllers' and i[0] != ' ':   # space on first line
+            if my_object and not my_object in objects:
+                objects.append(my_object)
+            my_object = {}
+            my_object['name'] = i
+        elif run_type == 'logicaldisks' and i.find('Logical Drive:') > 0:
+            if my_object and not my_object in objects:
+                objects.append(my_object)
+            my_object = {}
+            my_object['name'] = i.strip()
+        elif run_type == 'physicaldisks' and i.find('physicaldrive') > 0:
+            if my_object and not my_object in objects:
+                objects.append(my_object)
+            my_object = {}
+            my_object['name'] = i.strip()
+        else:
+            i = i.strip()
+            if i.find(':') < 1:
+                continue
+            i = i.split(':')
+            if i[0] == '':
+                continue  # skip empty lines
+            if len(i) == 1:
+                continue
+            key = i[0].strip()
+            value = ' '.join(i[1:]).strip()
+            my_object[key] = value
+    if my_object and not my_object in objects:
+        objects.append(my_object)
+    return objects
 
 
-def run_hpacucli(type='controllers', controller=None):
-	if type=='controllers':
-		command="hpacucli  controller all show detail"
-	elif type=='logicaldisks' or type=='physicaldisks':
-		if controller.has_key('Slot'):
-			identifier = 'slot=%s' % (controller['Slot'] )
-		else:
-			add_summary( "Controller not found" )
-			end()
-		if type=='logicaldisks':
-			command = "hpacucli  controller %s ld all show detail" % (identifier)
-		if type=='physicaldisks':
-			command = "hpacucli  controller %s pd all show detail" % (identifier)
-	
-	#command="hpacucli  controller slot=1 ld all show detail"
-	#command="hpacucli  controller slot=1 ld all show detail"
-	debug ( command ) 
-	if sudo: command = "sudo " + command
-	output = runCommand(command)
-	# Some basic error checking
-	error_strings = [ 'Permission denied' ]
-	error_strings.append('Error: You need to have administrator rights to continue.')
-	for error in error_strings:
-		if output.find( error ) > -1 and output.find("sudo") != 0:
-			command = "sudo " + command 
-			print command
-			output = runCommand(command)
-	output = output.split('\n')
-	objects = []
-	object = None
-	for i in output:
-		if len(i) == 0: continue
-		if i.strip() == '': continue
-		if type=='controllers' and i[0] != ' ': # No space on first line
-			if object and not object in objects: objects.append(object)
-			object = {}
-			object['name'] = i
-		elif type=='logicaldisks' and i.find('Logical Drive:') > 0:
-			if object and not object in objects: objects.append(object)
-			object = {}
-			object['name'] = i.strip() 
-		elif type=='physicaldisks' and i.find('physicaldrive') > 0:
-			if object and not object in objects: objects.append(object)
-			object = {}
-			object['name'] = i.strip() 
-		else:
-			i = i.strip()
-			if i.find(':') < 1: continue
-			i = i.split(':')
-			if i[0] == '': continue # skip empty lines
-			if len(i) == 1: continue
-			key = i[0].strip()
-			value = ' '.join( i[1:] ).strip()
-			object[key] = value
-	if object and not object in objects: objects.append(object)
-	return objects
-
 controllers = []
+
+
 def check_controllers():
-	global controllers
-	status = -1
-	controllers = run_hpacucli()
-	if len(controllers) == 0:
-		add_summary("No Disk Controllers Found. Exiting...")
-		global nagios_state
-		nagios_state = unknown
-		end()
-	add_summary( "Found %s controllers" % ( len(controllers) ) )
-	for i in controllers:
-		controller_status = check(i, 'Controller Status', 'OK' )
-		status = max(status, controller_status)
-		
-		cache_status = check(i, 'Cache Status' )
-		status = max(status, cache_status)
-		
-		controller_serial = 'n/a'
-		cache_serial = 'n/a'
-		if i.has_key('Serial Number'):
-			controller_serial = i['Serial Number']
-		if i.has_key('Cache Serial Number'):
-			cache_serial = i['Cache Serial Number']
-		add_long ( "%s" % (i['name']) )
-		add_long( "- Controller Status: %s (sn: %s)" % ( state[controller_status], controller_serial ) )
-		add_long( "- Cache Status: %s (sn: %s)" % ( state[cache_status], cache_serial ) )
+    global controllers
+    status = -1
+    controllers = run_hpacucli()
+    if len(controllers) == 0:
+        add_summary("No Disk Controllers Found. Exiting...")
+        global nagios_state
+        nagios_state = unknown
+        end()
+    add_summary("Found %s controllers" % (len(controllers)))
+    for i in controllers:
+        controller_status = check(i, 'Controller Status', 'OK')
+        status = max(status, controller_status)
 
-		if controller_status > ok or cache_status > ok:
-			add_summary( ";%s on %s;" % (state[controller_status], i['name']) )
+        cache_status = check(i, 'Cache Status')
+        status = max(status, cache_status)
 
-	add_summary(', ')	
-	return status
+        controller_serial = 'n/a'
+        cache_serial = 'n/a'
+        if 'Serial Number' in i:
+            controller_serial = i['Serial Number']
+        if 'Cache Serial Number' in i:
+            cache_serial = i['Cache Serial Number']
+        add_long("%s" % (i['name']))
+        add_long("- Controller Status: %s (sn: %s)"
+                 % (state[controller_status], controller_serial))
+        add_long("- Cache Status: %s (sn: %s)"
+                  % (state[cache_status], cache_serial))
+
+        if controller_status > ok or cache_status > ok:
+            add_summary(";%s on %s;" % (state[controller_status], i['name']))
+
+    add_summary(', ')
+    return status
 
 
 def check_logicaldisks():
-	global controllers
-	if len(controllers) < 1:
-		controllers = run_hpacucli()
-	logicaldisks = []
-	for controller in controllers:
-		for ld in  run_hpacucli(type='logicaldisks', controller=controller):
-			logicaldisks.append ( ld )
-        status = -1
-	add_long("\nChecking logical Disks:" )
-        add_summary( "%s logicaldisks" % ( len(logicaldisks) ) )
-	for i in logicaldisks:
-		ld_status =  check(i, 'Status' )
-		status = max(status, ld_status)
-		
-		mount_point = i['Mount Points']
-		add_long( "- %s (%s) = %s" % (i['name'], mount_point, state[ld_status]) )
-	add_summary(". ")
+    global controllers
+    if len(controllers) < 1:
+        controllers = run_hpacucli()
+    logicaldisks = []
+    for controller in controllers:
+        for ld in run_hpacucli(run_type='logicaldisks',
+                                controller=controller):
+            logicaldisks.append(ld)
+    status = -1
+    add_long("\nChecking logical Disks:")
+    add_summary("%s logicaldisks" % (len(logicaldisks)))
+    for i in logicaldisks:
+        ld_status = check(i, 'Status')
+        status = max(status, ld_status)
+
+        if i.get('Status') == 'Failed':
+            status = max(status, critical)
+
+        mount_point = i['Mount Points']
+        add_long("- %s (%s) = %s" % (i['name'], mount_point, state[ld_status]))
+    add_summary(". ")
+
 
 def check_physicaldisks():
-        global controllers
-	disktype='physicaldisks'
-        if len(controllers) < 1:
-                controllers = run_hpacucli()
-        disks = []
-        for controller in controllers:
-                for disk in  run_hpacucli(type=disktype, controller=controller):
-                        disks.append ( disk )
-        status = -1
-        add_long("\nChecking Physical Disks:" )
-        add_summary( "%s %s" % ( len(disks), disktype ) )
-        for i in disks:
-                disk_status =  check(i, 'Status' )
-                status = max(status, disk_status)
+    global controllers
+    disktype = 'physicaldisks'
+    if len(controllers) < 1:
+        controllers = run_hpacucli()
+    disks = []
+    for controller in controllers:
+        for disk in run_hpacucli(run_type=disktype, controller=controller):
+            disks.append(disk)
+    status = -1
+    add_long("\nChecking Physical Disks:")
+    add_summary("%s %s" % (len(disks), disktype))
+    for i in disks:
+        disk_status = check(i, 'Status')
+        status = max(status, disk_status)
 
-		size = i['Size']
-		firmware = i['Firmware Revision']
-		interface = i['Interface Type']
-		serial = i['Serial Number']
-		model = i['Model']
-                add_long( "- %s, %s, %s = %s" % (i['name'], interface, size, state[disk_status]) )
-		if disk_status > ok:
-			add_long( "-- Replace drive, firmware=%s, model=%s, serial=%s" % (firmware,model, serial))
-	if status > ok:
-		add_summary( "(errors)" )
+        size = i['Size']
+        firmware = i['Firmware Revision']
+        interface = i['Interface Type']
+        serial = i['Serial Number']
+        model = i['Model']
+        add_long("- %s, %s, %s = %s" %
+                 (i['name'], interface, size, state[disk_status])
+        )
+        if disk_status > ok:
+            error_str = "-- Replace drive, firmware=%s, model=%s, serial=%s"
+            add_long(error_str % (firmware, model, serial))
+    if status > ok:
+        add_summary("(errors)")
         add_summary(". ")
 
 
-def check(object, field, valid_states = ['OK']):
-	state = -1
-	global nagios_status
-	if object.has_key(field):
-		if object[field] in valid_states:
-			state = ok
-		else:
-			state = warning
-	nagios_status = max(nagios_status, state)
-	return state
-
+def check(my_object, field, valid_states=None):
+    if valid_states is None:
+        valid_states = ['OK']
+    state = -1
+    global nagios_status
+    if field in my_object:
+        if my_object[field] in valid_states:
+            state = ok
+        else:
+            state = warning
+    nagios_status = max(nagios_status, state)
+    return state
 
 
 def parse_arguments():
-	arguments = argv[1:]
-	while len(arguments) > 0:
-		arg = arguments.pop(0)
-		if arg == '--help':
-			print_help()
-			exit(ok)
-		elif arg == '--path':
-			path = arguments.pop(0)
-			set_path(path)
-		elif arg == '--debug':
-			global debugging
-			debugging = True
-		elif arg == '--sudo':
-			global sudo
-			sudo = True
-		else:
-			print_help()
-			exit(unknown)
-			
-
+    arguments = argv[1:]
+    while len(arguments) > 0:
+        arg = arguments.pop(0)
+        if arg == '--help':
+            print_help()
+            exit(ok)
+        elif arg == '--path':
+            path = arguments.pop(0)
+            set_path(path)
+        elif arg == '--debug':
+            global debugging
+            debugging = True
+        elif arg == '--sudo':
+            global sudo
+            sudo = True
+        else:
+            print_help()
+            exit(unknown)
 
 
 def main():
-	parse_arguments()
-	set_path('')
-	check_controllers()
-	check_logicaldisks()
-	check_physicaldisks()
-	end()	
+    parse_arguments()
+    set_path('')
+    check_controllers()
+    check_logicaldisks()
+    check_physicaldisks()
+    end()
 
 
 if __name__ == '__main__':
-	main()
+    main()

check_hpacucli/nagios-okplugin-check_hpacucli.spec

@@ -2,7 +2,7 @@
 
 Summary:	A Nagios plugin to check HP Array with hpacucli
 Name:		nagios-okplugin-check_hpacucli
-Version:	0.0.2
+Version:	2
 Release:	1%{?dist}
 License:	GPLv2+
 Group:		Applications/System
@@ -19,6 +19,7 @@ Checks HP Array with hpacucli
 %prep
 %setup -q
 perl -pi -e "s|/usr/lib|%{_libdir}|g" nrpe.d/check_hpacucli.cfg
+perl -pi -e "s|/usr/lib64|%{_libdir}|g" sudoers.d/*
 
 %build
 
@@ -27,6 +28,7 @@ perl -pi -e "s|/usr/lib|%{_libdir}|g" nrpe.d/check_hpacucli.cfg
 rm -rf %{buildroot}
 install -D -p -m 0755 check_hpacucli.py %{buildroot}%{_libdir}/nagios/plugins/check_hpacucli.py
 install -D -p -m 0755 nrpe.d/check_hpacucli.cfg %{buildroot}/etc/nrpe.d/check_hpacucli.cfg
+install -D -p -m 0440 sudoers.d/check_hpacucli %{buildroot}/etc/sudoers.d/check_hpacucli
 
 %clean
 rm -rf %{buildroot}
@@ -36,7 +38,28 @@ rm -rf %{buildroot}
 %doc README LICENSE
 %{_libdir}/nagios/plugins/*
 /etc/nrpe.d/check_hpacucli.cfg
+/etc/sudoers.d/check_hpacucli
 
 %changelog
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 2-1
+- check_hpacucli.py - fix typo in hpacucli command (palli@opensource.is)
+- check_hpacucli.py: pep8 cleanup (palli@opensource.is)
+- check_hpacucli - fix tab indentation (palli@opensource.is)
+- check_hpacucli: ignore hpacucli output that starts with "Note:"
+  (palli@opensource.is)
+- sudoers.d added to install (you@example.com)
+- dummy commit (you@example.com)
+- dummy commit (you@example.com)
+- Add sudoers support to check_hpacucli (palli@opensource.is)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.2-2
+- version number of scripts bumped (palli@opensource.is)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.2-1
+- check_command is now sudo'ed (palli@opensource.is)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.3-1
+- new package built with tito
+
 * Mon Mar  1 2010  Pall Sigurdsson <palli@opensource.is> 0.1-1
 - Initial packaging

check_hpacucli/nrpe.d/check_hpacucli.cfg

@@ -1,2 +1,2 @@
-command[check_hpacucli]=/usr/lib/nagios/plugins/check_hpacucli.py
+command[check_hpacucli]=sudo /usr/lib/nagios/plugins/check_hpacucli.py
 

check_hpacucli/sudoers.d/check_hpacucli

@@ -0,0 +1,2 @@
+Defaults:nrpe	!requiretty
+nrpe        ALL=(ALL)       NOPASSWD: /usr/lib64/nagios/plugins/check_hpacucli.py

check_hparray/check_hparray

@@ -81,7 +81,7 @@ check_raid()
 {
         raid_ok=`cat $TEMPFILE |grep -i ok|wc -l`
         raid_warning=`cat $TEMPFILE|grep -i -E  'rebuild|predictive' |wc -l`
-        raid_critical_1=`cat $TEMPFILE|grep -i 'failed|recovery' | wc -l`
+        raid_critical_1=`cat $TEMPFILE|grep -i -E 'failed|recovery' | wc -l`
 
         err_check=`expr $raid_ok + $raid_warning + $raid_critical_1 `
 
@@ -133,7 +133,7 @@ case "$1" in
                 exit 0
                 ;;
 	--all)
-		controllers=`sudo -u root hpacucli controller all show | sed 's/.*Slot \([0-9]*\).*/\1/'`
+		controllers=`sudo -u root $HPACUCLI controller all show | sed 's/.*Slot \([0-9]*\).*/\1/'`
 		for i in $controllers ; do sudo -u root $HPACUCLI controller slot=$i pd all show status;done > $TEMPFILE
 		check_raid
 		;;

check_hpasm/nagios-okplugin-check_hpasm.spec

@@ -0,0 +1,55 @@
+%define debug_package %{nil}
+
+Summary:	A Nagios plugin to check HP Hardware Status 
+Name:		nagios-okplugin-check_hpasm
+Version:	4.1.4
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		http://opensource.is/trac/wiki/check_hpasm
+Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_hpasm/releases/nagios-okplugin-check_hpasm-%{version}.tar.gz
+Requires:	nagios-okconfig-nrpe
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Pall Sigurdsson <palli@opensource.is>
+BuildArch:	noarch
+
+
+
+%description
+A Nagios plugin to check HP Hardware Status
+
+
+%prep
+%setup -q
+
+%build
+perl -pi -e "s|/usr/lib|%{_libdir}|g" sudoers.d/check_hpasm
+perl -pi -e "s|/usr/lib|%{_libdir}|g" nrpe.d/check_hpasm.cfg
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 check_hpasm %{buildroot}%{_libdir}/nagios/plugins/check_hpasm
+install -D -p -m 0440 sudoers.d/check_hpasm %{buildroot}/etc/sudoers.d/check_hpasm
+install -D -p -m 0644 nrpe.d/check_hpasm.cfg %{buildroot}/etc/nrpe.d/check_hpasm.cfg
+
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+#%doc README LICENSE
+#%{_libdir}/nagios/plugins/*
+%{_libdir}/nagios/plugins/check_hpasm
+/etc/sudoers.d/check_hpasm
+/etc/nrpe.d/check_hpasm.cfg
+
+%changelog
+* Fri Oct 03 2014 Tomas Edwardsson <tommi@tommi.org> 4.1.4-1
+- hpasm invalid nrpe check command name (tommi@tommi.org)
+
+* Thu May 15 2014 Tomas Edwardsson <tommi@tommi.org> 4.1.3-1
+- new package built with tito
+
+* Tue Jun 4 2013 Pall Sigurdsson <palli@opensource.is> 4.1.2-1
+- Initial packaging

check_hpasm/nrpe.d/check_hpasm.cfg

@@ -0,0 +1,3 @@
+
+
+command[check_hpasm]=sudo /usr/lib/nagios/plugins/check_hpasm

check_hpasm/sudoers.d/check_hpasm

@@ -0,0 +1,2 @@
+Defaults:nrpe	!requiretty
+nrpe		ALL = (root) NOPASSWD: /usr/lib/nagios/plugins/check_hpasm

check_hpssacli/LICENSE

@@ -2,7 +2,7 @@
 		       Version 2, June 1991
 
  Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+               51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -278,7 +278,8 @@ PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
 POSSIBILITY OF SUCH DAMAGES.
 
 		     END OF TERMS AND CONDITIONS
-
+
+
 	    How to Apply These Terms to Your New Programs
 
   If you develop a new program, and you want it to be of the greatest
@@ -305,7 +306,7 @@ the "copyright" line and a pointer to where the full notice is found.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 
 
 Also add information on how to contact you by electronic and paper mail.

check_hpssacli/README

@@ -0,0 +1,53 @@
+= check_hpssacli =
+Checks the raid status on a HP Array using hpssacli. to check the following:
+
+ * Controller Status
+ * Controller Cache Status
+ * Logical disk health (raid status)
+ * Physical disk health
+
+== Download ==
+check_hpssacli.py depends on the hpssacli binary which comes with the HP Proliant Support Pack (PSP). The PSP can be downloaded [http://downloads.linux.hp.com/SDR/downloads/ProLiantSupportPack here].
+
+You can get check_hpacucly.py directly from our subversion repo [http://opensource.is/trac/browser/nagios-plugins/check_hpssacli/trunk here]
+
+== help page ==
+{{{
+# python check_hpssacli.py  --help
+check_hpssacli version 1.0
+This plugin checks HP Array with the hpssacli command
+
+Usage: check_hpssacli.py 
+Usage: check_hpssacli.py [--help]
+Usage: check_hpssacli.py [--version]
+Usage: check_hpssacli.py [--path </path/to/hpssacli>]
+Usage: check_hpssacli.py [--no-perfdata]
+Usage: check_hpssacli.py [--no-longoutput]
+
+
+}}}
+
+== Example output ==
+{{{
+# ./check_hparray --all
+OK - Found 1 controllers, 2 logicaldisks. 8 physicaldisks.  | 
+
+Smart Array P400 in Slot 1
+- Controller Status: OK (sn: P61620F9VV6FX2)
+- Cache Status: OK (sn: PA82C0H9VV4695)
+
+Checking logical Disks:
+- Logical Drive: 1 (/boot 101 MB) = OK
+- Logical Drive: 2 (None) = OK
+
+Checking Physical Disks:
+- physicaldrive 2I:1:1, SAS, 146 GB = OK
+- physicaldrive 2I:1:2, SAS, 146 GB = OK
+- physicaldrive 1I:1:5, SAS, 146 GB = OK
+- physicaldrive 1I:1:6, SAS, 146 GB = OK
+- physicaldrive 1I:1:7, SAS, 146 GB = OK
+- physicaldrive 1I:1:8, SAS, 146 GB = OK
+- physicaldrive 2I:1:3, SAS, 146 GB = OK
+- physicaldrive 2I:1:4, SAS, 146 GB = OK
+}}}
+

check_hpssacli/check_hpssacli.py

@@ -0,0 +1,362 @@
+#!/usr/bin/python
+#
+# Copyright 2019, Gardar Thorsteinsson <gardar@ok.is>
+#
+# check_hpssacli.py is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# check_hpssacli.py is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# About this script
+#
+# This script will check the status of Smart Array Raid Controller
+# You need the hpssacli binary in path (/usr/sbin/hpssacli is a good place)
+# hpssacli comes with the Proliant Support Pack (PSP) from HP
+
+debugging = False
+
+# No real need to change anything below here
+version = "1.1"
+ok = 0
+warning = 1
+critical = 2
+unknown = 3
+not_present = -1
+nagios_status = -1
+
+state = {}
+state[not_present] = "Not Present"
+state[ok] = "OK"
+state[warning] = "Warning"
+state[critical] = "Critical"
+state[unknown] = "Unknown"
+
+
+longserviceoutput = "\n"
+perfdata = ""
+summary = ""
+sudo = False
+
+
+from sys import exit
+from sys import argv
+from os import getenv, putenv, environ
+import subprocess
+
+
+def print_help():
+    print "check_hpssacli version %s" % version
+    print "This plugin checks HP Array with the hpssacli command"
+    print ""
+    print "Usage: %s " % argv[0]
+    print "Usage: %s [--help]" % argv[0]
+    print "Usage: %s [--version]" % argv[0]
+    print "Usage: %s [--path </path/to/hpssacli>]" % argv[0]
+    print "Usage: %s [--no-perfdata]" % argv[0]
+    print "Usage: %s [--no-longoutput]" % argv[0]
+    print  ""
+
+
+def error(errortext):
+    print "* Error: %s" % errortext
+    print_help()
+    print "* Error: %s" % errortext
+    exit(unknown)
+
+
+def debug(debugtext):
+    global debugging
+    if debugging:
+        print  debugtext
+
+
+def runCommand(command):
+    """ Run command from the shell prompt. Exit Nagios style if unsuccessful"""
+    proc = subprocess.Popen(command,
+                            shell=True,
+                            stdout=subprocess.PIPE,
+                            stderr=subprocess.PIPE,
+                            )
+    stdout, stderr = proc.communicate('through stdin to stdout')
+    if proc.returncode > 0:
+        print "Error %s: %s\n command was: '%s'"\
+              % (proc.returncode, stderr.strip(), command)
+    debug("results: %s" % (stdout.strip()))
+    if proc.returncode == 127:  # File not found, lets print path
+        path = getenv("PATH")
+        print "Check if your path is correct %s" % (path)
+    if stderr.find('Password:') == 0 and command.find('sudo') == 0:
+        print "Check if user is in the sudoers file"
+    if stderr.find('sorry, you must have a tty to run sudo') == 0 and command.find('sudo') == 0:
+        print "Please remove 'requiretty' from /etc/sudoers"
+        exit(unknown)
+    else:
+        return stdout
+
+
+def end():
+    global summary
+    global longserviceoutput
+    global perfdata
+    global nagios_status
+    print "%s - %s | %s" % (state[nagios_status], summary, perfdata)
+    print longserviceoutput
+    if nagios_status < 0:
+        nagios_status = unknown
+    exit(nagios_status)
+
+
+def add_perfdata(text):
+    global perfdata
+    text = text.strip()
+    perfdata = perfdata + " %s " % (text)
+
+
+def add_long(text):
+    global longserviceoutput
+    longserviceoutput = longserviceoutput + text + '\n'
+
+
+def add_summary(text):
+    global summary
+    summary = summary + text
+
+
+def set_path(path):
+    current_path = getenv('PATH')
+    if current_path.find('C:\\') > -1:  # We are on this platform
+        if path == '':
+            path = ";C:\Program Files\hp\hpssacli\Bin"
+            path = path + ";C:\Program Files (x86)\hp\hpssacli\Bin"
+            path = path + ";C:\Program Files\Smart Storage Administrator\ssacli\bin"
+        else:
+            path = ';' + path
+    else:  # Unix/Linux, etc
+        if path == '':
+            path = ":/usr/sbin"
+        else:
+            path = ':' + path
+    current_path = "%s%s" % (current_path, path)
+    environ['PATH'] = current_path
+
+
+def run_hpssacli(run_type='controllers', controller=None):
+    if run_type == 'controllers':
+        command = "hpssacli  controller all show detail"
+    elif run_type in ('logicaldisks', 'physicaldisks'):
+        if 'Slot' not in controller:
+            add_summary("Controller not found")
+            end()
+        identifier = 'slot=%s' % (controller['Slot'])
+        command = "hpssacli  controller %s %s all show detail"
+        if run_type == 'logicaldisks':
+            subcommand = 'ld'
+        elif run_type == 'physicaldisks':
+            subcommand = 'pd'
+        else:
+            end()
+            return
+        command = command % (identifier, subcommand)
+    debug(command)
+    if sudo:
+        command = "sudo " + command
+    output = runCommand(command)
+    # Some basic error checking
+    error_strings = ['Permission denied']
+    error_strings.append('Error: You need to have administrator rights to continue.')
+    for error in error_strings:
+        if output.find(error) > -1 and output.find("sudo") != 0:
+            command = "sudo " + command
+            print command
+            output = runCommand(command)
+    output = output.split('\n')
+    objects = []
+    my_object = None
+    for i in output:
+        if len(i) == 0:
+            continue
+        if i.strip() == '':
+            continue
+        if i.startswith('Note:'):
+            continue
+        if run_type == 'controllers' and i[0] != ' ':   # space on first line
+            if my_object and not my_object in objects:
+                objects.append(my_object)
+            my_object = {}
+            my_object['name'] = i
+        elif run_type == 'logicaldisks' and i.find('Logical Drive:') > 0:
+            if my_object and not my_object in objects:
+                objects.append(my_object)
+            my_object = {}
+            my_object['name'] = i.strip()
+        elif run_type == 'physicaldisks' and i.find('physicaldrive') > 0:
+            if my_object and not my_object in objects:
+                objects.append(my_object)
+            my_object = {}
+            my_object['name'] = i.strip()
+        else:
+            i = i.strip()
+            if i.find(':') < 1:
+                continue
+            i = i.split(':')
+            if i[0] == '':
+                continue  # skip empty lines
+            if len(i) == 1:
+                continue
+            key = i[0].strip()
+            value = ' '.join(i[1:]).strip()
+            my_object[key] = value
+    if my_object and not my_object in objects:
+        objects.append(my_object)
+    return objects
+
+
+controllers = []
+
+
+def check_controllers():
+    global controllers
+    status = -1
+    controllers = run_hpssacli()
+    if len(controllers) == 0:
+        add_summary("No Disk Controllers Found. Exiting...")
+        global nagios_state
+        nagios_state = unknown
+        end()
+    add_summary("Found %s controllers" % (len(controllers)))
+    for i in controllers:
+        controller_status = check(i, 'Controller Status', 'OK')
+        status = max(status, controller_status)
+
+        cache_status = check(i, 'Cache Status')
+        status = max(status, cache_status)
+
+        controller_serial = 'n/a'
+        cache_serial = 'n/a'
+        if 'Serial Number' in i:
+            controller_serial = i['Serial Number']
+        if 'Cache Serial Number' in i:
+            cache_serial = i['Cache Serial Number']
+        add_long("%s" % (i['name']))
+        add_long("- Controller Status: %s (sn: %s)"
+                 % (state[controller_status], controller_serial))
+        add_long("- Cache Status: %s (sn: %s)"
+                  % (state[cache_status], cache_serial))
+
+        if controller_status > ok or cache_status > ok:
+            add_summary(";%s on %s;" % (state[controller_status], i['name']))
+
+    add_summary(', ')
+    return status
+
+
+def check_logicaldisks():
+    global controllers
+    if len(controllers) < 1:
+        controllers = run_hpssacli()
+    logicaldisks = []
+    for controller in controllers:
+        for ld in run_hpssacli(run_type='logicaldisks',
+                                controller=controller):
+            logicaldisks.append(ld)
+    status = -1
+    add_long("\nChecking logical Disks:")
+    add_summary("%s logicaldisks" % (len(logicaldisks)))
+    for i in logicaldisks:
+        ld_status = check(i, 'Status')
+        status = max(status, ld_status)
+
+        if i.get('Status') == 'Failed':
+            status = max(status, critical)
+
+        mount_point = i['Mount Points']
+        add_long("- %s (%s) = %s" % (i['name'], mount_point, state[ld_status]))
+    add_summary(". ")
+
+
+def check_physicaldisks():
+    global controllers
+    disktype = 'physicaldisks'
+    if len(controllers) < 1:
+        controllers = run_hpssacli()
+    disks = []
+    for controller in controllers:
+        for disk in run_hpssacli(run_type=disktype, controller=controller):
+            disks.append(disk)
+    status = -1
+    add_long("\nChecking Physical Disks:")
+    add_summary("%s %s" % (len(disks), disktype))
+    for i in disks:
+        disk_status = check(i, 'Status')
+        status = max(status, disk_status)
+
+        size = i['Size']
+        firmware = i['Firmware Revision']
+        interface = i['Interface Type']
+        serial = i['Serial Number']
+        model = i['Model']
+        add_long("- %s, %s, %s = %s" %
+                 (i['name'], interface, size, state[disk_status])
+        )
+        if disk_status > ok:
+            error_str = "-- Replace drive, firmware=%s, model=%s, serial=%s"
+            add_long(error_str % (firmware, model, serial))
+    if status > ok:
+        add_summary("(errors)")
+        add_summary(". ")
+
+
+def check(my_object, field, valid_states=None):
+    if valid_states is None:
+        valid_states = ['OK']
+    state = -1
+    global nagios_status
+    if field in my_object:
+        if my_object[field] in valid_states:
+            state = ok
+        else:
+            state = warning
+    nagios_status = max(nagios_status, state)
+    return state
+
+
+def parse_arguments():
+    arguments = argv[1:]
+    while len(arguments) > 0:
+        arg = arguments.pop(0)
+        if arg == '--help':
+            print_help()
+            exit(ok)
+        elif arg == '--path':
+            path = arguments.pop(0)
+            set_path(path)
+        elif arg == '--debug':
+            global debugging
+            debugging = True
+        elif arg == '--sudo':
+            global sudo
+            sudo = True
+        else:
+            print_help()
+            exit(unknown)
+
+
+def main():
+    parse_arguments()
+    set_path('')
+    check_controllers()
+    check_logicaldisks()
+    check_physicaldisks()
+    end()
+
+
+if __name__ == '__main__':
+    main()

check_hpssacli/nagios-okplugin-check_hpssacli.spec

@@ -0,0 +1,45 @@
+%define debug_package %{nil}
+
+Summary:	A Nagios plugin to check HP Array with hpssacli
+Name:		nagios-okplugin-check_hpssacli
+Version:	1.1
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		http://opensource.is/trac/wiki/check_hpssacli
+Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_hpssacli/releases/nagios-okplugin-check_hpssacli-%{version}.tar.gz
+Requires:	hpssacli
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Gardar Thorsteinsson <gardar@ok.is>
+
+
+%description
+Checks HP Array with hpssacli
+
+%prep
+%setup -q
+perl -pi -e "s|/usr/lib|%{_libdir}|g" nrpe.d/check_hpssacli.cfg
+perl -pi -e "s|/usr/lib64|%{_libdir}|g" sudoers.d/*
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 check_hpssacli.py %{buildroot}%{_libdir}/nagios/plugins/check_hpssacli.py
+install -D -p -m 0755 nrpe.d/check_hpssacli.cfg %{buildroot}/etc/nrpe.d/check_hpssacli.cfg
+install -D -p -m 0440 sudoers.d/check_hpssacli %{buildroot}/etc/sudoers.d/check_hpssacli
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+%doc README LICENSE
+%{_libdir}/nagios/plugins/*
+/etc/nrpe.d/check_hpssacli.cfg
+/etc/sudoers.d/check_hpssacli
+
+%changelog
+* Fri Jun 14 2019 Gardar Thorsteinsson <gardar@ok.is> 1.1
+- Initial packaging

check_hpssacli/nrpe.d/check_hpssacli.cfg

@@ -0,0 +1,2 @@
+command[check_hpssacli]=sudo /usr/lib/nagios/plugins/check_hpssacli.py
+

check_hpssacli/sudoers.d/check_hpssacli

@@ -0,0 +1,2 @@
+Defaults:nrpe	!requiretty
+nrpe        ALL=(ALL)       NOPASSWD: /usr/lib64/nagios/plugins/check_hpssacli.py

check_http_multi/README.md

@@ -0,0 +1,40 @@
+Introduction
+============
+Check http multi was created to check multiple websites in one plugin. You can check the following:
+
+* Latency per website
+* Overall runtime of http requests (serial)
+* Number of failed websites
+* Percentage of failed websites
+
+
+How
+===
+
+Check Percentage Failed
+-----------------------
+Here we check http://www.google.com and http://adagios.org
+
+Failure rates of 
+* 0%-30% are ok
+* 30%-60% are warning
+* everything above is critical
+
+```
+$ check_http_multi -u http://www.google.com -u http://adagios.org/ \
+    --th metric=failed_percentage,warning=30..60,critical=60..inf 
+Checked 2 uris, 0 failed | 'http://www.google.com'=0.24s;;;; 'http://adagios.org/'=0.47s;;;; 'failed'=0;;;; 'failed_percentage'=0.0%;30..60;60..inf;; 'runtime'=0.711745977402s;;;;
+http://www.google.com fetched in 0.24 seconds
+http://adagios.org/ fetched in 0.47 seconds
+```
+
+
+
+Author
+======
+Tomas Edwardsson <tommi@tommi.org>
+
+
+License
+=======
+GPLv3 or later

check_http_multi/check_http_multi

@@ -0,0 +1,90 @@
+#!/usr/bin/python
+# Copyright 2013, Tomas Edwardsson
+#
+# This script is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This script is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+from pynag.Plugins import PluginHelper, critical, warning, ok
+import requests
+import time
+import signal
+
+
+class TimeoutException(Exception):
+    pass
+
+
+def signal_alarm(signo, frame):
+    raise TimeoutException()
+
+
+def main():
+    plugin = PluginHelper()
+
+    plugin.parser.add_option('-u', help="http uris", dest="uri", action="append")
+    plugin.parse_arguments()
+
+    if not plugin.options.uri:
+        plugin.parser.error("-u (uri) argument is required")
+
+    start_time = time.time()
+    # Assign timeout handler
+    signal.signal(signal.SIGALRM, signal_alarm)
+
+    success = 0
+    failed = 0
+    for uri in plugin.options.uri:
+	if not uri: continue
+        webstate, status = check_website(uri)
+        if webstate:
+            success += 1
+            plugin.add_long_output("%s fetched in %s seconds" % (uri, status))
+            plugin.add_metric(uri, status, uom="s")
+
+        else:
+            failed += 1
+            plugin.add_long_output("%s failed, %s" % (uri, status))
+
+    plugin.add_summary("Checked %i uris, %i failed" % ((failed + success), failed))
+    plugin.status(ok)
+    plugin.add_metric("failed", failed)
+    plugin.add_metric("failed_percentage", (100 * failed / float(failed + success)), uom="%")
+    plugin.add_metric("runtime", time.time() - start_time, uom="s")
+    plugin.check_all_metrics()
+
+    plugin.exit()
+
+
+
+def check_website(uri, timeout=10):
+    """Tries fetching the uri specified
+    returns (False, "Invalid status code <status_code>") on any failure and status code other than 2XX
+    returns (None, "Timeout in %f seconds") on timeout
+    returns (True, time (float)) it took to fetch the website on success"""
+
+    start_time = time.time()
+    signal.alarm(timeout)
+    try:
+        req = requests.get(uri)
+        if str(req.status_code)[0] != "2":
+            return False, "Invalid HTTP status: " + str(req.status_code)
+    except TimeoutException:
+        return None, "Timeout in %.2f seconds" % (time.time() - start_time)
+    except Exception, e:
+        return False, "Error encountered: " + e.message
+    signal.alarm(0)
+    return True, "%.2f" % (time.time() - start_time)
+
+
+if __name__ == "__main__":
+    main()

check_http_multi/nagios-okplugin-check_http_multi.spec

@@ -0,0 +1,43 @@
+%define debug_package %{nil}
+%define plugin check_http_multi
+
+Summary:	A Nagios plugin to check multiple websites
+Name:		nagios-okplugin-%{plugin}
+Version:	0.1.1
+Release:	1%{?dist}
+License:	GPLv3+
+Group:		Applications/System
+URL:		https://github.com/opinkerfi/misc/tree/master/nagios-plugins/check_%{plugin}
+Source0:	https://github.com/opinkerfi/misc/tree/master/nagios-plugins/check_%{plugin}/releases/%{name}-%{version}.tar.gz
+Requires:	nagios-okconfig-nrpe >= 0.0.4
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Tomas Edwardsson <tommi@tommi.org>
+BuildArch:	noarch
+
+
+%description
+Checks multiple websites for latency and failures. You can specify how many
+of them will fail to return warning or critical state.
+
+%prep
+%setup -q
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 %{plugin} %{buildroot}%{_libdir}/nagios/plugins/%{plugin}
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+%doc README.md
+%{_libdir}/nagios/plugins/*
+
+%changelog
+* Thu Jun 06 2013 Tomas Edwardsson <tommi@tommi.org> 0.1.1-1
+- new package built with tito
+

check_ibm_bladecenter/nagios-okplugin-check_ibm_bladecenter.spec

@@ -0,0 +1,66 @@
+%define debug_package %{nil}
+
+Summary:	A Nagios plugin to check IBM Bladecenters 
+Name:		nagios-okplugin-check_ibm_bladecenter
+Version:	4
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		http://opensource.ok.is/trac/wiki/Nagios-OKPlugin-check_ibm_bladecenter
+Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_ibm_bladecenter/releases/%{name}-%{version}.tar.gz
+Requires:	nagios-plugins
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Pall Sigurdsson <palli@opensource.is>
+BuildArch:	noarch
+Requires:	nrpe
+
+
+%description
+Checks the health status of an IBM Bladecenter via SNMP
+
+%prep
+%setup -q
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 check_ibm_bladecenter.py %{buildroot}%{_libdir}/nagios/plugins/check_ibm_bladecenter.py
+#mkdir -p %{buildroot}%{_sysconfdir}/nrpe.d
+#sed "s^/usr/lib64^%{_libdir}^g" nrpe.d/check_bond.cfg >  %{buildroot}%{_sysconfdir}/nrpe.d/check_bond.cfg
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+%doc README
+%{_libdir}/nagios/plugins/*
+#%config(noreplace) %{_sysconfdir}/nrpe.d/check_bond.cfg
+
+%changelog
+* Fri Feb 21 2014 Pall Sigurdsson <palli@opensource.is> 4-1
+- 
+
+* Fri Feb 21 2014 Unknown name 3-1
+- Merge branch 'master' of github.com:opinkerfi/nagios-plugins
+  (palli@opensource.is)
+- ibm_bladecenter - another firmware bug workaround (palli@opensource.is)
+- pep8 fixes (palli@opensource.is)
+- Fix workaround for firmware bug (palli@opensource.is)
+
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 2-1
+- Merge branch 'master' of github.com:opinkerfi/misc (palli@opensource.is)
+- --exclude option added. Added workaround around false positives
+  (palli@opensource.is)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.1.2-3
+- version number of scripts bumped (palli@opensource.is)
+
+* Thu Aug 23 2012 Pall Sigurdsson <palli@opensource.is> 1.1.2-2
+- rpm spec file added. version number bumped (palli@opensource.is)
+
+
+* Tue Jul 17 2012  Pall Sigurdsson 1.0.0-1
+- Initial packaging

check_ifoperstate/README.md

@@ -0,0 +1,5 @@
+Checks the operator status of network interfaces
+
+Requires:
+
+	The get_ifoperstate.sh script

check_ifoperstate/check_ifoperstate

@@ -0,0 +1,84 @@
+#!/usr/bin/python
+#
+# Copyright 2013, Tomas Edwardsson
+#
+# This script is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This script is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+# Enumerates interfaces and their operstate (up/down/unknown).
+
+__author__ = 'Tomas Edwardsson <tommi@tommi.org>'
+
+from subprocess import PIPE, Popen
+import os
+import sys
+from pynag.Plugins import PluginHelper, ok, critical, unknown
+
+helper = PluginHelper()
+
+helper.parser.add_option('-I', "--interface", help="Interface (eth0/bond/em/..) multiple supported with -I ... -I ...",
+                         dest="interfaces", action="append")
+helper.parser.add_option('-H', "--hostname", help="Check interface on remote host", dest="host_name")
+helper.parser.add_option('-l', "--list-interfaces", help="List interfaces", dest="list_interfaces", action="store_true")
+
+helper.parse_arguments()
+
+local_env = os.environ
+local_env["PATH"] += ":%s" % (":".join([
+    "/usr/lib/nagios/plugins",
+    "/usr/lib64/nagios/plugins",
+    "/usr/local/libexec",
+    "/usr/libexec",
+    "/usr/local/nagios/libexec"]))
+
+if helper.options.host_name:
+    command = ("check_nrpe -H %s -c get_ifoperstate" % helper.options.host_name).split()
+else:
+    command = ["get_ifoperstate.sh"]
+
+
+# List the interfaces and exit
+def get_interfaces():
+    interfaces = []
+    try:
+        cmd = Popen(command, stdout=PIPE, shell=False)
+        for line in cmd.stdout.readlines():
+            interface, status = line.strip().split(":")
+            interfaces.append((interface, status))
+
+    except Exception, e:
+        helper.add_summary("Unable to get interfaces \"%s\": %s" % (" ".join(command), e))
+        helper.status(unknown)
+        helper.exit()
+    return interfaces
+
+interface_state = get_interfaces()
+
+if helper.options.list_interfaces:
+    for interface in interface_state:
+        print "%-20s %s" % (interface[0], interface[1])
+    sys.exit(0)
+
+
+for interface in interface_state:
+    if not helper.options.interfaces or interface[0] in helper.options.interfaces:
+        if interface[1] == "unknown":
+            helper.add_status(unknown)
+        elif interface[1] == "up":
+            helper.add_status(ok)
+        else:
+            helper.add_status(critical)
+        helper.add_long_output("%s operstate is %s" % (interface[0], interface[1]))
+
+helper.check_all_metrics()
+helper.exit()

check_ifoperstate/nagios-okplugin-check_ifoperstate.spec

@@ -0,0 +1,45 @@
+%define debug_package %{nil}
+%define plugin check_ifoperstate
+
+Summary:	A Nagios plugin to check interface operator status
+Name:		nagios-okplugin-%{plugin}
+Version:	0.0.3
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		https://github.com/opinkerfi/misc/tree/master/nagios-plugins/check_%{plugin}
+Source0:	https://github.com/opinkerfi/misc/tree/master/nagios-plugins/check_%{plugin}/releases/%{name}-%{version}.tar.gz
+Requires:	nagios-okconfig-nrpe >= 0.0.4
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Tomas Edwardsson <tommi@tommi.org>
+BuildArch:	noarch
+
+
+%description
+Checks the operator status of network interfaces
+
+%prep
+%setup -q
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 %{plugin} %{buildroot}%{_libdir}/nagios/plugins/%{plugin}
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+%doc README.md
+%{_libdir}/nagios/plugins/*
+
+%changelog
+* Wed Jun 05 2013 Tomas Edwardsson <tommi@tommi.org> 0.0.3-1
+- Rename ifoperstate (tommi@tommi.org)
+
+* Wed Jun 05 2013 Tomas Edwardsson <tommi@tommi.org> 0.0.2-1
+- new package built with tito
+

check_ipa/README.md

@@ -0,0 +1,19 @@
+check_ipa_replication
+=====================
+You need some configuration for this plugin to have access to replication
+information.
+
+Allow anonymous read to replication information
+-----------------------------------------------
+You will need to do this for every IPA server, masters and replicas
+
+```
+ldapmodify -x -D "cn=directory manager" -W -f grant_anonymous_replication_view.ldif -h ipa-host.example.com
+```
+
+Configure the directory manager credentials
+-------------------------------------------
+NOT RECOMENDED, you can use -D and -w with the directory manager credentials
+and the plugin will work as expected.
+
+

check_ipa/check_ipa_replication

@@ -0,0 +1,61 @@
+#!/usr/bin/python 
+# Copyright 2013, Tomas Edwardsson 
+#
+# This script is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# This script is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+import ldap
+from pynag.Plugins import PluginHelper, critical, warning, ok
+
+plugin = PluginHelper()
+
+plugin.parser.add_option('-u', help="ldap uri", dest="uri")
+plugin.parser.add_option('-D', help="bind DN", dest="binddn")
+plugin.parser.add_option('-w', help="bind password", dest="bindpw")
+plugin.parse_arguments()
+
+if not plugin.options.uri:
+    plugin.parser.error('-u (uri) argument is required')
+
+try:
+    l = ldap.initialize(plugin.options.uri)
+
+    if plugin.options.binddn:
+        l.bind_s(plugin.options.binddn, plugin.options.bindpw)
+
+    replication = l.search_s('cn=config', 
+        ldap.SCOPE_SUBTREE, 
+        '(objectclass=nsds5replicationagreement)',
+        ['nsDS5ReplicaHost', 'nsds5replicaLastUpdateStatus'])
+except Exception, e:
+    plugin.status(critical)
+    plugin.add_summary("Unable to initialize ldap connection: %s" % (e))
+    plugin.exit()
+
+
+# Loop through replication agreements
+for rhost in replication:
+    plugin.add_summary("Replica %s Status: %s" % (rhost[1]['nsDS5ReplicaHost'][0], rhost[1]['nsds5replicaLastUpdateStatus'][0]))
+    if rhost[1]['nsds5replicaLastUpdateStatus'][0][7:8] == "0":
+        plugin.status(ok)
+    elif rhost[1]['nsds5replicaLastUpdateStatus'][0][7:8] == "1":
+        # Busy Replica is not an error, its "unknown" (but its "ok" for now)
+        plugin.status(ok)
+    else:
+        plugin.status(critical)
+
+if not len(replication):
+    plugin.add_summary("Warning: No replicas found")
+    plugin.status(warning)
+
+plugin.exit()

check_ipa/grant_anonymous_replication_view.ldif

@@ -0,0 +1,4 @@
+dn: cn="dc=mr,dc=lan",cn=mapping tree,cn=config
+changetype: modify
+add: aci
+aci: (targetattr=*)(targetfilter="(|(objectclass=nsds5replicationagreement)(objectclass=nsDSWindowsReplicationAgreement))")(version 3.0; aci "permission:Read Replication Agreements"; allow (read, search, compare) groupdn = "ldap:///anyone";)

check_ipa/nagios-okplugin-ipa.spec

@@ -0,0 +1,60 @@
+%define debug_package %{nil}
+%define plugin ipa
+
+Summary:	A Nagios plugin to check IPA server status
+Name:		nagios-okplugin-%{plugin}
+Version:	0.0.4
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		https://github.com/opinkerfi/misc/tree/master/nagios-plugins/check_%{plugin}
+Source0:	https://github.com/opinkerfi/misc/tree/master/nagios-plugins/check_%{plugin}/releases/%{name}-%{version}.tar.gz
+Requires:	python-ldap
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Tomas Edwardsson <tommi@ok.is>
+BuildArch:	noarch
+Requires:	nrpe
+
+
+%description
+Checks IPA server status
+
+%prep
+%setup -q
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 check_ipa_replication %{buildroot}%{_libdir}/nagios/plugins/check_ipa_replication
+mkdir -p %{buildroot}%{_sysconfdir}/nrpe.d
+sed "s^/usr/lib64^%{_libdir}^g" nrpe.d/check_ipa.cfg >  %{buildroot}%{_sysconfdir}/nrpe.d/check_ipa.cfg
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+%doc README
+%doc grant_anonymous_replication_view.ldif
+%{_libdir}/nagios/plugins/*
+%config(noreplace) %{_sysconfdir}/nrpe.d/check_ipa.cfg
+
+%changelog
+* Fri Apr 04 2014 Tomas Edwardsson <tommi@tommi.org> 0.0.4-1
+- Renamed to markdown (tommi@tommi.org)
+- Added examples and documentation (tommi@tommi.org)
+- Missing colon (tommi@tommi.org)
+- Added missing OK when things worked out (tommi@tommi.org)
+
+* Thu Apr 25 2013 Tomas Edwardsson <tommi@tommi.org> 0.0.3-1
+- Preliminary testing done, released
+- Various errors in syntax fixed (tommi@tommi.org)
+- Detection for no configured replicas (tommi@tommi.org)
+
+* Thu Apr 25 2013 Tomas Edwardsson <tommi@tommi.org> 0.0.2-1
+- Tagged new release
+
+* Wed Apr 25 2013 Tomas Edwardss <tommi@opensource.is> 0.0.1-1
+- Initial Packaging

check_ipa/nrpe.d/check_ipa.cfg

@@ -0,0 +1 @@
+command[check_ipa_replication]=/usr/lib64/nagios/plugins/check_ipa_replication -u 'ldap://localhost'

check_ironport/nagios-okplugin-check_ironport.spec

@@ -0,0 +1,52 @@
+%define debug_package %{nil}
+
+Summary:	A Nagios plugin to check Cisco Ironport 
+Name:		nagios-okplugin-check_ironport
+Version:	2
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		http://opensource.ok.is/trac/wiki/
+Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_ironport/releases/%{name}-%{version}.tar.gz
+Requires:	nagios-plugins
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Pall Sigurdsson <palli@opensource.is>
+BuildArch:	noarch
+Requires:	nrpe
+
+
+%description
+Checks the health status of a Cisco Ironport
+
+%prep
+%setup -q
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 check_ironport.py %{buildroot}%{_libdir}/nagios/plugins/check_ironport.py
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+%{_libdir}/nagios/plugins/*
+#%config(noreplace) %{_sysconfdir}/nrpe.d/check_bond.cfg
+
+%changelog
+* Thu Feb 20 2014 Pall Sigurdsson <palli@opensource.is> 2-1
+- Merge branch 'master' of https://opensource.ok.is/git/misc
+  (palli@opensource.is)
+
+* Tue Jul 31 2012 Pall Sigurdsson <palli@opensource.is> 1.1.4-1
+- initial packaging for nagios-okplugin-check_ironport (palli@opensource.is)
+
+* Tue Jul 31 2012 Pall Sigurdsson <palli@opensource.is> 1.1.3-1
+- new package built with tito
+
+
+* Tue Jul 31 2012  Pall Sigurdsson 1.0.0-1
+- Initial packaging

check_linux_modules.pl/LICENSE

@@ -2,7 +2,7 @@
 		       Version 2, June 1991
 
  Copyright (C) 1989, 1991 Free Software Foundation, Inc.
-                       59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+               51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 
@@ -278,7 +278,8 @@ PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
 POSSIBILITY OF SUCH DAMAGES.
 
 		     END OF TERMS AND CONDITIONS
-
+
+
 	    How to Apply These Terms to Your New Programs
 
   If you develop a new program, and you want it to be of the greatest
@@ -305,7 +306,7 @@ the "copyright" line and a pointer to where the full notice is found.
 
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+    Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
 
 
 Also add information on how to contact you by electronic and paper mail.

check_linux_modules.pl/check_linux_modules.spec

@@ -0,0 +1,54 @@
+%define debug_package %{nil}
+
+Summary:	A Nagios plugins to check if a specific linux module exists
+Name:		nagios-okplugin-check_linux_modules
+Version:	0.0.13
+Release:	1%{?dist}
+License:	GPLv2+
+Group:		Applications/System
+URL:		http://opensource.is/trac/wiki/check_smssend
+Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/%{name}-%{version}.tar.gz
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	Pall Sigurdsson <palli@opensource.is>
+
+
+%description
+A Nagios plugins to check if a specific linux module exists
+
+%prep
+%setup -q
+perl -pi -e "s|/usr/lib|%{_libdir}|g" nrpe.d/check_module.cfg
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 check_linux_modules.pl %{buildroot}%{_libdir}/nagios/plugins/check_linux_modules.pl
+install -D -p -m 0755 nrpe.d/check_module.cfg %{buildroot}/etc/nrpe.d/check_module.cfg
+
+%clean
+rm -rf %{buildroot}
+
+%files
+%defattr(-,root,root,-)
+%doc  LICENSE
+%{_libdir}/nagios/plugins/*
+/etc/nrpe.d/check_module.cfg
+
+%changelog
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.13-1
+- typo in plugin name fixed (palli@opensource.is)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.12-1
+- new package built with tito
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.11-1
+- license added (palli@opensource.is)
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.10-1
+- 
+
+* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.9-1
+- new package built with tito
+

check_lvm_mirror/check_lvm_mirror.py

@@ -0,0 +1,117 @@
+#!/usr/bin/python
+
+from pynag.Plugins import simple as Plugin, WARNING, CRITICAL, UNKNOWN, OK
+from subprocess import Popen, PIPE
+import os
+
+
+def main():
+    global plugin
+
+    plugin = Plugin(must_threshold=False)
+    plugin.add_arg("l", "logical-volume",
+                   "Comma seperated list of VG/LV, eg vg00/data,vg00/snap",
+                   required=False)
+    plugin.add_arg("V", "volume-group",
+                   "Comma seperated list of VG, eg vg00,vg01",
+                   required=False)
+    plugin.add_arg("a", "check-all", "Check all LVs", required=False,
+                   action="store_true")
+    plugin.activate()
+
+    lvs = plugin["logical-volume"] and plugin["logical-volume"].split(
+        ",") or []
+    vgs = plugin["volume-group"] and plugin["volume-group"].split(",") or []
+
+    if not lvs and not vgs and not plugin['check-all']:
+        plugin.parser.error(
+            "Either logical-volume or volume-group must be specified")
+    elif plugin['check-all'] and ( lvs or vgs ):
+        plugin.parser.error(
+            "Mixing check-all and logical-volume or volume-group does not make sense")
+
+    check_mirror(lvs, vgs, plugin['check-all'], plugin['host'])
+
+    (code, message) = (plugin.check_messages(joinallstr="\n"))
+    plugin.nagios_exit(code, message)
+
+
+def check_mirror(lv_list, vg_list, check_all, hostname):
+    # Ensure the right locale for text parsing
+    """
+
+        :rtype : None
+        """
+    # Change lang setting for string consitency
+    env = os.environ.copy()
+    env['LC_ALL'] = 'C'
+
+    # Remote execution
+    if hostname:
+        cmd = ['check_nrpe', '-H', hostname, '-c', 'get_lvm_mirrors']
+        # Local
+    else:
+        cmd = ["lvs", "--separator", ";", "-o",
+               "vg_name,lv_name,lv_attr,copy_percent"]
+    # Execute lvs
+    ret = None
+    lvs_output = None
+    try:
+        lvs = Popen(cmd, stdout=PIPE, shell=False, env=env)
+        ret = lvs.wait()
+        lvs_output = lvs.stdout.readlines()
+    except Exception, e:
+        plugin.nagios_exit(UNKNOWN, "Unable to execute lvs: %s" % (e))
+
+    if ret != 0:
+        plugin.nagios_exit(CRITICAL,
+                       "lvs execution failed, return code %i" % (ret))
+    all_lvs = []
+    all_vgs = []
+
+    # Loop through lvs output
+    linenumber = 0
+    for l in lvs_output:
+        linenumber += 1
+        try:
+            vg_name, lv_name, lv_attr, copy_percent = l.strip().split(";")
+        except ValueError as error:
+            plugin.add_message(UNKNOWN,
+                               "Unable to parse lvs line %i: %s\n%s" % (
+                                   linenumber, error, l))
+            continue
+        all_lvs.append("%s/%s" % (vg_name, lv_name))
+        if vg_name not in all_vgs:
+            all_vgs.append(vg_name)
+
+        if check_all or "%s/%s" % (
+                vg_name, lv_name) in lv_list or vg_name in vg_list:
+            if lv_attr[0] != "m" and lv_attr[0] != "M":
+                plugin.add_message(CRITICAL,
+                                   "LV %s/%s not mirrored" % (vg_name, lv_name))
+            elif lv_attr[2] != "a":
+                plugin.add_message(CRITICAL,
+                                   "LV %s/%s not active" % (vg_name, lv_name))
+            elif lv_attr[5] != "o":
+                plugin.add_message(CRITICAL,
+                                   "LV %s/%s not open" % (vg_name, lv_name))
+            elif float(copy_percent or 0) < 100:
+                plugin.add_message(WARNING, "LV %s/%s Copy Percent %s" % (
+                    vg_name, lv_name, copy_percent))
+            else:
+                plugin.add_message(OK, "LV %s/%s functioning" % (vg_name, lv_name))
+
+    # Find lvs that were specified in cmd line but were not found via lvs
+    for v in vg_list:
+        if v not in all_vgs:
+            plugin.add_message(CRITICAL, "VG %s not found" % (v))
+
+    # Find lvs that were specified in cmd line but were not found via lvs
+    for l in lv_list:
+        if l not in all_lvs:
+            plugin.add_message(CRITICAL, "LV %s not found" % (l))
+
+if __name__ == "__main__":
+    main()
+
+

check_msa_hardware-pl/README.md

@@ -0,0 +1 @@
+Checks hardware status of MSA disk arrays also known as HP P2000

check_msa_hardware-pl/nagios-okplugin-check_msa.spec

@@ -0,0 +1,72 @@
+%define debug_package %{nil}
+%define plugin check_msa_hardware
+%define packager Gardar Thorsteinsson <gardar@ok.is>
+
+Summary:	A Nagios plugin to check status of an MSA (HP P2000) disk array
+Name:		nagios-okplugin-%{plugin}
+Version:	1.0.5
+Release:	2%{?dist}
+License:	GPLv3+
+Group:		Applications/System
+URL:		https://github.com/opinkerfi/nagios-plugins/tree/master/%{plugin}
+Source0:	https://github.com/opinkerfi/nagios-plugins/tree/master/%{plugin}/releases/%{name}-%{version}.tar.gz
+BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
+Packager:	%{packager}
+BuildArch:	noarch
+Requires:	pynag
+
+
+%description
+Checks status of a remote MSA disk array, also known as HP P2000 
+%prep
+%setup -q
+
+%global __requires_exclude %{?__requires_exclude:%__requires_exclude}|}^perl\\(utils\\)
+
+%build
+
+
+%install
+rm -rf %{buildroot}
+install -D -p -m 0755 %{plugin} %{buildroot}%{_libdir}/nagios/plugins/%{plugin}
+mkdir -p %{buildroot}%{_sysconfdir}/nrpe.d
+sed "s^/usr/lib64^%{_libdir}^g" nrpe.d/%{plugin}.cfg >  %{buildroot}%{_sysconfdir}/nrpe.d/%{plugin}.cfg
+
+# Temporary fix for selinux
+chcon system_u:object_r:nagios_unconfined_plugin_exec_t:s0 %{plugin} %{buildroot}%{_libdir}/nagios/plugins/%{plugin}
+
+%clean
+rm -rf %{buildroot}
+
+%post
+/sbin/service nrpe status &> /dev/null && /sbin/service nrpe reload || :
+
+%files
+%defattr(-,root,root,-)
+%doc README.md
+%{_libdir}/nagios/plugins/*
+%config(noreplace) %{_sysconfdir}/nrpe.d/%{plugin}.cfg
+
+%changelog
+* Fri May 09 2018 Gardar Thorsteinsson <gardar@ok.is> 1.0.5-2
+- Filter out perl-utils dep
+
+* Thu Jan 30 2014 Pall Sigurdsson <palli@opensource.is> 1.0.5-1
+- 
+
+* Thu Jan 30 2014 Pall Sigurdsson <palli@opensource.is> 1.0.4-1
+- README.md added (you@example.com)
+- nrpe.d added to check_msa (you@example.com)
+- rename check_msa_hardware-pl (you@example.com)
+
+* Thu Jan 30 2014 Pall Sigurdsson <palli@opensource.is> 1.0.3-1
+- new package built with tito
+
+* Thu Jan 30 2014 Pall Sigurdsson <palli@opensource.is> 1.0.2-1
+- new package built with tito
+
+* Thu Jan 30 2014 Unknown name 1.0.1-1
+- new package built with tito
+
+* Fri Jan 27 2014 Pall Sigurdsson 1.0.0-1
+- Initial Packaging

check_msa_hardware-pl/nrpe.d/check_msa_hardware.cfg

@@ -0,0 +1 @@
+command[check_msa_hardware]=/usr/lib64/nagios/plugins/check_msa_hardware

check_mssql/README

@@ -1,8 +0,0 @@
-check_mssql_dbsize
-
-Returns the total number of databases and perfdata pertaining size
-
-check_mssql_health
-
-checks a bunch of variables and can execute custom queries into MS-SQL
-databases.

check_mssql/check_mssql_dbsize

@@ -1,95 +0,0 @@
-#!/usr/bin/perl -w
-#
-# check_mssql_dbsize is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# check_mssql_dbsize is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-#
-# This script will check MSSQL Database size via check_nrpe and NSclient. returns performance data in Nagios format
-# Author Pall Sigurdsson <palli@opensource.is>
-#
-
-use strict;
-use Nagios::Plugin;
-
-
-my $np = Nagios::Plugin->new(
-	usage => "Usage: %s <hostname>" );
-
-$np->add_arg(
-	spec => 'debug|d=i',
-	help => '-d, --debug=INTEGER',
-);
-
-$np->getopts;
-
-my $NRPECMD = "/usr/lib/nagios/plugins/check_nrpe";
-
-if (@ARGV < 1) {
-	usage();
-	exit 3;
-}
-
-my $HOSTNAME=$ARGV[0];
-
-
-my $databases = nrpeexec("-H $HOSTNAME -t 60 -c listCounterInstances -a 'SQLServer:Databases'");
-my @array1 = split(/\,/, $databases);
-
-
-my $num_databases = 0;
-foreach my $database (@array1)
-{
-	# Strip whitespace
-	$database =~ s/^\s*(.*?)\s*$/$1/;
-
-	# Call check_nrpe
-	my $dbSize = nrpeexec("-H $HOSTNAME -t 60 -c CheckCounter -a 'Counter:$database=\\SQLServer:Databases($database)\\Data File(s) Size (KB)'");
-
-	# Strip everything but the performance data
-	$dbSize =~ s/^.*\|(.*?)$/$1/;
-	chomp($dbSize);
-	$np->add_perfdata($dbSize);
-	$num_databases = $num_databases + 1;
-}
-
-$np->nagios_exit( OK, "$num_databases databases found in $HOSTNAME");
-
-
-
-sub usage {
-	print <<"	EOUSAGE";
-Usage $0 <hostname>
-	EOUSAGE
-}
-
-
-
-# Execute NRPE with some error handling
-sub nrpeexec {
-	my @args = @_;
-
-	my $output = '';
-	if (open NRPE, "$NRPECMD " . join(' ',@args) . ' 2>&1 |') {
-		$output .= $_ while(<NRPE>);
-		close NRPE;
-	}
-	my $ret = $? >> 8;
-	# No such file or directory
-	if ($ret == 127) {
-		$np->nagios_die("Cannot execute $NRPECMD command missing");
-	# Some other error
-	} elsif ($ret != 0) {
-		$np->nagios_die("Cannot execute $NRPECMD: $!");
-	}
-	return $output;
-}

check_mssql/nagios-okplugin-mssql.spec

@@ -1,43 +0,0 @@
-%define debug_package %{nil}
-
-Summary:	Nagios plugins to check the status of MS-SQL Servers
-Name:		nagios-okplugin-mssql
-Version:	0.0.3
-Release:	2%{?dist}
-License:	GPLv2+
-Group:		Applications/System
-URL:		http://opensource.is/trac/wiki/nagios-MSSQL
-Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_mssql/releases/nagios-okplugin-mssql-%{version}.tar.gz
-Requires:	perl-Nagios-Plugin
-Requires:	perl-DBD-Sybase
-BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Packager:	Tomas Edwardsson <tommi@opensource.is>
-
-
-%description
-MS-SQL checks for health and size of MSSQL servers
-
-%prep
-%setup -q
-perl -pi -e "s|/usr/lib|%{_libdir}|g" check_mssql_dbsize
-perl -pi -e "s|/usr/lib|%{_libdir}|g" check_mssql_health
-
-%build
-
-
-%install
-rm -rf %{buildroot}
-install -D -p -m 0755 check_mssql_dbsize %{buildroot}%{_libdir}/nagios/plugins/check_mssql_dbsize
-install -D -p -m 0755 check_mssql_health %{buildroot}%{_libdir}/nagios/plugins/check_mssql_health
-
-%clean
-rm -rf %{buildroot}
-
-%files
-%defattr(-,root,root,-)
-%doc README LICENSE
-%{_libdir}/nagios/plugins/*
-
-%changelog
-* Sun Nov 21 2010  Tomas Edwardsson <tommi@opensource.is> 0.0.3-1
-- Initial packaging

check_mssql_health/README

@@ -1,8 +0,0 @@
-check_mssql_dbsize
-
-Returns the total number of databases and perfdata pertaining size
-
-check_mssql_health
-
-checks a bunch of variables and can execute custom queries into MS-SQL
-databases.

check_mssql_health/check_mssql_dbsize

@@ -1,95 +0,0 @@
-#!/usr/bin/perl -w
-#
-# check_mssql_dbsize is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# check_mssql_dbsize is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-#
-#
-# This script will check MSSQL Database size via check_nrpe and NSclient. returns performance data in Nagios format
-# Author Pall Sigurdsson <palli@opensource.is>
-#
-
-use strict;
-use Nagios::Plugin;
-
-
-my $np = Nagios::Plugin->new(
-	usage => "Usage: %s <hostname>" );
-
-$np->add_arg(
-	spec => 'debug|d=i',
-	help => '-d, --debug=INTEGER',
-);
-
-$np->getopts;
-
-my $NRPECMD = "/usr/lib/nagios/plugins/check_nrpe";
-
-if (@ARGV < 1) {
-	usage();
-	exit 3;
-}
-
-my $HOSTNAME=$ARGV[0];
-
-
-my $databases = nrpeexec("-H $HOSTNAME -t 60 -c listCounterInstances -a 'SQLServer:Databases'");
-my @array1 = split(/\,/, $databases);
-
-
-my $num_databases = 0;
-foreach my $database (@array1)
-{
-	# Strip whitespace
-	$database =~ s/^\s*(.*?)\s*$/$1/;
-
-	# Call check_nrpe
-	my $dbSize = nrpeexec("-H $HOSTNAME -t 60 -c CheckCounter -a 'Counter:$database=\\SQLServer:Databases($database)\\Data File(s) Size (KB)'");
-
-	# Strip everything but the performance data
-	$dbSize =~ s/^.*\|(.*?)$/$1/;
-	chomp($dbSize);
-	$np->add_perfdata($dbSize);
-	$num_databases = $num_databases + 1;
-}
-
-$np->nagios_exit( OK, "$num_databases databases found in $HOSTNAME");
-
-
-
-sub usage {
-	print <<"	EOUSAGE";
-Usage $0 <hostname>
-	EOUSAGE
-}
-
-
-
-# Execute NRPE with some error handling
-sub nrpeexec {
-	my @args = @_;
-
-	my $output = '';
-	if (open NRPE, "$NRPECMD " . join(' ',@args) . ' 2>&1 |') {
-		$output .= $_ while(<NRPE>);
-		close NRPE;
-	}
-	my $ret = $? >> 8;
-	# No such file or directory
-	if ($ret == 127) {
-		$np->nagios_die("Cannot execute $NRPECMD command missing");
-	# Some other error
-	} elsif ($ret != 0) {
-		$np->nagios_die("Cannot execute $NRPECMD: $!");
-	}
-	return $output;
-}

check_mssql_health/nagios-okplugin-mssql.spec

@@ -1,46 +0,0 @@
-%define debug_package %{nil}
-
-Summary:	Nagios plugins to check the status of MS-SQL Servers
-Name:		nagios-okplugin-mssql
-Version:	0.0.4
-Release:	1%{?dist}
-License:	GPLv2+
-Group:		Applications/System
-URL:		http://opensource.is/trac/wiki/nagios-MSSQL
-Source0:	http://opensource.ok.is/trac/browser/nagios-plugins/check_mssql/releases/nagios-okplugin-mssql-%{version}.tar.gz
-Requires:	perl-Nagios-Plugin
-Requires:	perl-DBD-Sybase
-BuildRoot:	%{_tmppath}/%{name}-%{version}-%{release}-root-%(%{__id_u} -n)
-Packager:	Tomas Edwardsson <tommi@opensource.is>
-
-
-%description
-MS-SQL checks for health and size of MSSQL servers
-
-%prep
-%setup -q
-perl -pi -e "s|/usr/lib|%{_libdir}|g" check_mssql_dbsize
-perl -pi -e "s|/usr/lib|%{_libdir}|g" check_mssql_health
-
-%build
-
-
-%install
-rm -rf %{buildroot}
-install -D -p -m 0755 check_mssql_dbsize %{buildroot}%{_libdir}/nagios/plugins/check_mssql_dbsize
-install -D -p -m 0755 check_mssql_health %{buildroot}%{_libdir}/nagios/plugins/check_mssql_health
-
-%clean
-rm -rf %{buildroot}
-
-%files
-%defattr(-,root,root,-)
-%doc README LICENSE
-%{_libdir}/nagios/plugins/*
-
-%changelog
-* Mon Mar 12 2012 Pall Sigurdsson <palli@opensource.is> 0.0.4-1
-- new package built with tito
-
-* Sun Nov 21 2010  Tomas Edwardsson <tommi@opensource.is> 0.0.3-1
-- Initial packaging

check_mssql_health/src/check_mssql_health-1.5.8.2/AUTHORS

@@ -1 +0,0 @@
-Gerhard Lausser <gerhard.lausser@consol.de>

check_mssql_health/src/check_mssql_health-1.5.8.2/ChangeLog

@@ -1,67 +0,0 @@
-###############################################
-# Changelog of the check_mssql_health plugin #
-###############################################
-
-1.5.8.2 2011-01-19
-- output a nicer error message if a sqlrelay connection fails
-
-1.5.8.1 2011-01-03
-- bugfix in --mode sql (numeric vs. regexp result)
-
-1.5.8 2010-12-20
-- mode sql can now have a non-numerical output which is compared to a string/regexp
-- new parameter --dbthresholds
-- new mode report can be used to output only the bad news (short,long,html)
-
-1.5.7 2010-09-10
-- fixed a bug in database-free (too much free space was calculated when more than one datafile of a database was on the same filesystem). (Thanks Juergen Essberger)
-- new parameter extra-opts
-
-1.5.6 2010-08-12
-- new parameter --dbthresholds. thresholds can now also be deposited in the table check_mssql_health_thresholds
-- added --currentdb so that the plugin can connect to a non-default database
-- --with-mymodules-dyn-dir on the commandline overrides the configure-option of the same name
-
-1.5.5
-- backup-age is now an alias for the "official" database-backup-age
-- catch the "can't change context to database" error
-- --mode sqlcmd
-
-1.5.3 2009-11-02
-- fixed a bug in mode database-free (results are more accurate now)
-- added new mode backup-age which checks the age (in hours) of the last backup
-
-1.5.2
-- fixed a bug where database names with special characters showed errors. (Thanks Hugh Ranalli) 
-
-1.5.1 2009-05-26
-- added --server which can be used instead of --hostname/port (Thanks Mark Monaghan)
-- lots of fixes. sql server 2000 should now be fully supported. (Thanks Mereghetti Stefano)
-- --warning/--critical were ignored for memory-pool-related modes (Thanks Mereghetti Stefano)
-
-1.5.0.2 2009-05-05
-- fixed a bug which led to error messages when using the plugin with sql server 2000 (Thanks Christian Mies)
-- fixed a bug so sql server 2000 can list-databases (Thanks Mereghetti Stefano)
-
-1.5.0.1 2009-04-29
-- added a security advice to the README (Thanks Mathieu Barret)
-- fixed a bug in database-free (Thanks Michael Luebben)
-- fixed a typo (Thanks Bernd Staudacher)
-
-1.5 - 2009-03-20
-- rewrote database-free so that unrestricted growth is taken into account (limit is disk)
-- added support for SQLRelay
-
-1.2 - 2009-03-19
-- added support for object_name <> SQLServer:... (this caused "unable to aquire"-errors sometimes)
-- fixed a bug in the PNP template
-
-1.1 - 2009-03-11
-- added modes: transactions, latches-wait-time, locks-waits, locks-timeouts,
-               locks-deadlocks, sql-recompilations, total-server-memory
-- beautified the PNP template
-- fixed counter rollovers after database restart
-
-1.0 - 2009-03-10
-----------------
-- Initial release

check_mssql_health/src/check_mssql_health-1.5.8.2/INSTALL

@@ -1,229 +0,0 @@
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2008 Free Software
-Foundation, Inc.
-
-   This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
-Basic Installation
-==================
-
-   These are generic installation instructions.
-
-   The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions.  Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
-   It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring.  (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
-   If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release.  If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
-   The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'.  You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
-  1. `cd' to the directory containing the package's source code and type
-     `./configure' to configure the package for your system.  If you're
-     using `csh' on an old version of System V, you might need to type
-     `sh ./configure' instead to prevent `csh' from trying to execute
-     `configure' itself.
-
-     Running `configure' takes awhile.  While running, it prints some
-     messages telling which features it is checking for.
-
-  2. Type `make' to compile the package.
-
-  3. Optionally, type `make check' to run any self-tests that come with
-     the package.
-
-  4. Type `make install' to install the programs and any data files and
-     documentation.
-
-  5. You can remove the program binaries and object files from the
-     source code directory by typing `make clean'.  To also remove the
-     files that `configure' created (so you can compile the package for
-     a different kind of computer), type `make distclean'.  There is
-     also a `make maintainer-clean' target, but that is intended mainly
-     for the package's developers.  If you use it, you may have to get
-     all sorts of other programs in order to regenerate files that came
-     with the distribution.
-
-Compilers and Options
-=====================
-
-   Some systems require unusual options for compilation or linking that
-the `configure' script does not know about.  Run `./configure --help'
-for details on some of the pertinent environment variables.
-
-   You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment.  Here
-is an example:
-
-     ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
-   *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-   You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory.  To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'.  `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script.  `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
-   If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory.  After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
-
-   By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc.  You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PATH'.
-
-   You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', the package will use
-PATH as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
-
-   In addition, if you use an unusual directory layout you can give
-options like `--bindir=PATH' to specify different values for particular
-kinds of files.  Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
-
-   If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-
-Optional Features
-=================
-
-   Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System).  The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
-
-   For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
-
-Specifying the System Type
-==========================
-
-   There may be some features `configure' cannot figure out
-automatically, but needs to determine by the type of machine the package
-will run on.  Usually, assuming the package is built to be run on the
-_same_ architectures, `configure' can figure that out, but if it prints
-a message saying it cannot guess the machine type, give it the
-`--build=TYPE' option.  TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
-
-     CPU-COMPANY-SYSTEM
-
-where SYSTEM can have one of these forms:
-
-     OS KERNEL-OS
-
-   See the file `config.sub' for the possible values of each field.  If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
-
-   If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
-
-   If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
-
-Sharing Defaults
-================
-
-   If you want to set default values for `configure' scripts to share,
-you can create a site shell script called `config.site' that gives
-default values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists.  Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
-
-Defining Variables
-==================
-
-   Variables not defined in a site shell script can be set in the
-environment passed to `configure'.  However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost.  In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'.  For example:
-
-     ./configure CC=/usr/local2/bin/gcc
-
-will cause the specified gcc to be used as the C compiler (unless it is
-overridden in the site shell script).
-
-`configure' Invocation
-======================
-
-   `configure' recognizes the following options to control how it
-operates.
-
-`--help'
-`-h'
-     Print a summary of the options to `configure', and exit.
-
-`--version'
-`-V'
-     Print the version of Autoconf used to generate the `configure'
-     script, and exit.
-
-`--cache-file=FILE'
-     Enable the cache: use and save the results of the tests in FILE,
-     traditionally `config.cache'.  FILE defaults to `/dev/null' to
-     disable caching.
-
-`--config-cache'
-`-C'
-     Alias for `--cache-file=config.cache'.
-
-`--quiet'
-`--silent'
-`-q'
-     Do not print messages saying which checks are being made.  To
-     suppress all normal output, redirect it to `/dev/null' (any error
-     messages will still be shown).
-
-`--srcdir=DIR'
-     Look for the package's source code in directory DIR.  Usually
-     `configure' can determine that directory automatically.
-
-`configure' also accepts some other, not widely useful, options.  Run
-`configure --help' for more details.
-

check_mssql_health/src/check_mssql_health-1.5.8.2/Makefile.am

@@ -1,13 +0,0 @@
-## Process this file with automake to produce Makefile.in
-
-# find . \( -type d -and -name .svn -and -prune \) -or -type f -exec fromdos -v {} \;
-
-SUBDIRS = plugins-scripts t
-EXTRA_DIST = contrib
-
-dist-hook:
-	rm -f t/var/tmp/*
-	rm -f t/var/adm/*
-	find $(distdir) -depth -name .svn -exec rm -rf {} \;
-	find $(distdir) -type f -exec fromdos -v {} \;
-	make

check_mssql_health/src/check_mssql_health-1.5.8.2/Makefile.in

@@ -1,575 +0,0 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# find . \( -type d -and -name .svn -and -prune \) -or -type f -exec fromdos -v {} \;
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = .
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(top_srcdir)/configure AUTHORS COPYING \
-	ChangeLog INSTALL NEWS TODO config.guess config.sub install-sh \
-	missing
-subdir = .
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno configure.status.lineno
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-exec-recursive install-info-recursive \
-	install-recursive installcheck-recursive installdirs-recursive \
-	pdf-recursive ps-recursive uninstall-info-recursive \
-	uninstall-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  { test ! -d $(distdir) \
-    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
-         && rm -fr $(distdir); }; }
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-distuninstallcheck_listfiles = find . -type f -print
-distcleancheck_listfiles = find . -type f -print
-INSTALL = @INSTALL@
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CAT = @CAT@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-GREP = @GREP@
-GZIP = @GZIP@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_OPTS = @INSTALL_OPTS@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MYMODULES_DIR = @MYMODULES_DIR@
-MYMODULES_DYN_DIR = @MYMODULES_DYN_DIR@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-RELEASE = @RELEASE@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SH = @SH@
-SHELL = @SHELL@
-STATEFILES_DIR = @STATEFILES_DIR@
-STRIP = @STRIP@
-SUPPORT = @SUPPORT@
-VERSION = @VERSION@
-WARRANTY = @WARRANTY@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__leading_dot = @am__leading_dot@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-with_nagios_group = @with_nagios_group@
-with_nagios_user = @with_nagios_user@
-SUBDIRS = plugins-scripts t
-EXTRA_DIST = contrib
-all: all-recursive
-
-.SUFFIXES:
-am--refresh:
-	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \
-	      cd $(srcdir) && $(AUTOMAKE) --gnu  \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-uninstall-info-am:
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-mostlyclean-recursive clean-recursive distclean-recursive \
-maintainer-clean-recursive:
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	mkdir $(distdir)
-	$(mkdir_p) $(distdir)/plugins-scripts
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(mkdir_p) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	$(MAKE) $(AM_MAKEFLAGS) \
-	  top_distdir="$(top_distdir)" distdir="$(distdir)" \
-	  dist-hook
-	-find $(distdir) -type d ! -perm -755 -exec chmod a+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r $(distdir)
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
-	$(am__remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__remove_distdir)
-
-dist dist-all: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod a+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && cd $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
-	$(am__remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
-distuninstallcheck:
-	@cd $(distuninstallcheck_dir) \
-	&& test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-exec-am:
-
-install-info: install-info-recursive
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-info-am
-
-uninstall-info: uninstall-info-recursive
-
-.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
-	check-am clean clean-generic clean-recursive ctags \
-	ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-hook \
-	dist-shar dist-tarZ dist-zip distcheck distclean \
-	distclean-generic distclean-recursive distclean-tags \
-	distcleancheck distdir distuninstallcheck dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-exec install-exec-am install-info \
-	install-info-am install-man install-strip installcheck \
-	installcheck-am installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic maintainer-clean-recursive \
-	mostlyclean mostlyclean-generic mostlyclean-recursive pdf \
-	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
-	uninstall-info-am
-
-
-dist-hook:
-	rm -f t/var/tmp/*
-	rm -f t/var/adm/*
-	find $(distdir) -depth -name .svn -exec rm -rf {} \;
-	find $(distdir) -type f -exec fromdos -v {} \;
-	make
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

check_mssql_health/src/check_mssql_health-1.5.8.2/README

@@ -1,179 +0,0 @@
-check_mssql_health Nagios Plugin README
----------------------
-
-This plugin is used to monitor a variety of MS SQL Server database metrics. 
-
-* For instructions on installing this plugin for use with Nagios,
-  see below. In addition, generic instructions for the GNU toolchain
-  can be found in the INSTALL file.
-
-* For major changes between releases, read the CHANGES file.
-
-* For information on detailed changes that have been made,
-  read the Changelog file.
-
-* This plugin is self documenting.  All plugins that comply with
-  the basic guidelines for development will provide detailed help when
-  invoked with the '-h' or '--help' options.
-
-You can check for the latest plugin at:
-  http://www.consol.com/opensource/nagios/check-mssql-health
-
-The documentation in this README covers only the most common features.
-To view the full documentation and examples, go to 
-  http://www.consol.com/opensource/nagios/check-mssql-health or
-  http://www.consol.de/opensource/nagios/check-mssql-health
-
-Send mail to gerhard.lausser@consol.de for assistance.
-Please include the OS type/version and the Perl DBI/DBD version
-that you are using.
-Also, run the plugin with the '-vvv' option and provide the resulting 
-version information.  Of course, there may be additional diagnostic information
-required as well.  Use good judgment.
-
-For patch submissions and bug reports, please send me a mail. You can also find
-me at http://www.nagios-portal.de
-
-Requirements
---------------------------------------------------------
-You need to install the Perl module DBD::Sybase first.
-It is very important to set the protocol version in /etc/freetds.conf to 8.0
-Otherwise your database password will be visible on the network.
-
-[global]
-        # TDS protocol version
-        tds version = 8.0
-
-
-
-How to "compile" the check_mssql_health script.
---------------------------------------------------------
-
-1) Run the configure script to initialize variables and create a Makefile, etc.
-
-	./configure --prefix=BASEDIRECTORY --with-nagios-user=SOMEUSER --with-nagios-group=SOMEGROUP --with-perl=PATH_TO_PERL --with-statefiles-dir=STATE_PATH
-
-   a) Replace BASEDIRECTORY with the path of the directory under which Nagios
-      is installed (default is '/usr/local/nagios')
-   b) Replace SOMEUSER with the name of a user on your system that will be
-      assigned permissions to the installed plugins (default is 'nagios')
-   c) Replace SOMEGRP with the name of a group on your system that will be
-      assigned permissions to the installed plugins (default is 'nagios')
-   d) Replace PATH_TO_PERL with the path where a perl binary can be found.
-      Besides the system wide perl you might have installed a private perl
-      just for the nagios plugins (default is the perl in your path).
-   e) Replace STATE_PATH with the directory where you want the script to
-      write state files which transport information from one run to the next.
-      (default is /tmp)
-
-   Simply running ./configure will be sufficient to create a check_mssql_health
-   script which you can customize later.
-      
-
-2) "Compile" the plugin with the following command:
-
-	make
-
-    This will produce a "check_mssql_health" script. You will also find
-    a "check_mssql_health.pl" which you better ignore. It is the base for
-    the compilation filled with placeholders. These will be replaced during
-    the make process.
-
-
-3) Install the compiled plugin script with the following command:
-
-	make install
-
-   The installation procedure will attempt to place the plugin in a 
-   'libexec/' subdirectory in the base directory you specified with
-   the --prefix argument to the configure script.
-
-
-4) Verify that your configuration files for Nagios contains
-   the correct paths to the new plugin.
-
-
-Command line parameters
------------------------
-
---hostname=<the database server>
-   This is the hostname or the ip-address.
-
---port=<the instance port>
-   This is the port where an instance listens. Default: 1433
-
---server=<the database server>
-   This can be used instead of a hostname/port combination.
-   The servername given here is used for a lookup in /etc/freetds.conf
-
---user=<username>
-   This is the user which reads the system tables.
-
---password=<secret>
-   This is the user's password.
-
---mode=<operation mode>
-   This parameter tells the plugin what it should check.
-   The list of known modes may grow frequently. Please look at 
-   http://www.consol.com/opensource/nagios/check-mssql-health for a list
-   of features.
-
---database=<database name>
-  Database-related modes check all databases in one run by default.
-  If only a single database should be checked, use this parameter.
-
---warning=<warning threshold>
-  If the metric is out of this range, the plugin returns a warning.
-
---critical=<critical threshold>
-  If the metric is out of this range, the plugin returns a critical.
-
-   
-Connecting 
-----------
-
-
-You can call the plugin with "--hostname <ip or dns-name> [--port <port number>]"
-This bypasses the freetds.conf file and directly connects you to 
-whatever is listening on port 1433 or <port number>
-This will surely be the default instance. If you have different (named) instances
-listening on the same port, you need to edit /etc/freetds.conf
-
-[dbsrv1instance01] 
-        host = 192.168.1.1 
-        port = 1433 
-        instance = instance01 
-        
-[dbsrv1instance02] 
-        host = 192.168.1.1 
-        port = 1433 
-        instance = instance02 
-
-....
-
-Then you call the plugin with "--server dbsrv1instance02" for example.
-
-Testing the connection
-----------------------
-
-use DBI;
-use strict;
-
-my $username = "xxxxx";
-my $password = "xxxxx";
-my $dsn = "DBI:Sybase:;host=127.0.1.1;port=1433";
-#my $dsn = "DBI:Sybase:;server=dbsrv_in_freetds_conf";
-if (my $dbh = DBI->connect(
-    $dsn, $username, $password,
-    { RaiseError => 1, AutoCommit => 0, PrintError => 1 })) {
-  printf "connection succeeded\n";
-} else {
-  printf "connection failed\n";
-}
-
-
-
-
---------------------------------------
-That's it.  If you have any problems or questions, feel free to send mail
-to gerhard.lausser@consol.de

check_mssql_health/src/check_mssql_health-1.5.8.2/TODO

@@ -1 +0,0 @@
---database is important

check_mssql_health/src/check_mssql_health-1.5.8.2/acinclude.m4

@@ -1,78 +0,0 @@
-dnl @synopsis ACX_WHICH_GETHOSTBYNAME_R
-dnl
-dnl Provides a test to determine the correct way to call gethostbyname_r
-dnl
-dnl defines HAVE_GETHOSTBYNAME_R to the number of arguments required
-dnl
-dnl e.g. 6 arguments (linux)
-dnl e.g. 5 arguments (solaris)
-dnl e.g. 3 arguments (osf/1)
-dnl
-dnl @version $Id: acinclude.m4,v 1.5 2004/02/18 14:56:34 kdebisschop Exp $
-dnl @author Brian Stafford <brian@stafford.uklinux.net>
-dnl
-dnl based on version by Caolan McNamara <caolan@skynet.ie>
-dnl based on David Arnold's autoconf suggestion in the threads faq
-dnl
-AC_DEFUN([ACX_WHICH_GETHOSTBYNAME_R],
-[AC_CACHE_CHECK(number of arguments to gethostbyname_r,
-                acx_which_gethostbyname_r, [
-        AC_TRY_COMPILE([
-#               include <netdb.h> 
-        ],      [
-
-        char *name;
-        struct hostent *he;
-        struct hostent_data data;
-        (void) gethostbyname_r(name, he, &data);
-
-                ],acx_which_gethostbyname_r=3, 
-                        [
-dnl                     acx_which_gethostbyname_r=0
-  AC_TRY_COMPILE([
-#   include <netdb.h>
-  ], [
-        char *name;
-        struct hostent *he, *res;
-        char *buffer = NULL;
-        int buflen = 2048;
-        int h_errnop;
-        (void) gethostbyname_r(name, he, buffer, buflen, &res, &h_errnop)
-  ],acx_which_gethostbyname_r=6,
-  
-  [
-dnl  acx_which_gethostbyname_r=0
-  AC_TRY_COMPILE([
-#   include <netdb.h>
-  ], [
-                        char *name;
-                        struct hostent *he;
-                        char *buffer = NULL;
-                        int buflen = 2048;
-                        int h_errnop;
-                        (void) gethostbyname_r(name, he, buffer, buflen, &h_errnop)
-  ],acx_which_gethostbyname_r=5,acx_which_gethostbyname_r=0)
-
-  ]
-  
-  )
-                        ]
-                )
-        ])
-
-if test $acx_which_gethostbyname_r -gt 0 ; then
-    AC_DEFINE_UNQUOTED([HAVE_GETHOSTBYNAME_R], $acx_which_gethostbyname_r,
-                       [Number of parameters to gethostbyname_r or 0 if not available])
-fi
-
-])
-
-dnl @synopsis ACX_HELP_STRING(OPTION,DESCRIPTION)
-AC_DEFUN([ACX_HELP_STRING],
-         [  $1 builtin([substr],[                       ],len($1))[$2]])
-
-
-dnl @synopsis ACX_FEATURE(ENABLE_OR_WITH,NAME[,VALUE])
-AC_DEFUN([ACX_FEATURE],
-         [echo "builtin([substr],[                                  ],len(--$1-$2))--$1-$2: ifelse($3,,[$]translit($1-$2,-,_),$3)"])
-

check_mssql_health/src/check_mssql_health-1.5.8.2/aclocal.m4

@@ -1,559 +0,0 @@
-# generated automatically by aclocal 1.9.6 -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004,
-# 2005  Free Software Foundation, Inc.
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-# Copyright (C) 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION so it can be traced.
-# This function is AC_REQUIREd by AC_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-	 [AM_AUTOMAKE_VERSION([1.9.6])])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to `$srcdir/foo'.  In other projects, it is set to
-# `$srcdir', `$srcdir/..', or `$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is `.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 12
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.58])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-# test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" &&
-   test -f $srcdir/config.status; then
-  AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
- AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version})
-AM_MISSING_PROG(AUTOCONF, autoconf)
-AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version})
-AM_MISSING_PROG(AUTOHEADER, autoheader)
-AM_MISSING_PROG(MAKEINFO, makeinfo)
-AM_PROG_INSTALL_SH
-AM_PROG_INSTALL_STRIP
-AC_REQUIRE([AM_PROG_MKDIR_P])dnl
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-              [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-	      		     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-                  [_AM_DEPENDENCIES(CC)],
-                  [define([AC_PROG_CC],
-                          defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-                  [_AM_DEPENDENCIES(CXX)],
-                  [define([AC_PROG_CXX],
-                          defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl
-])
-])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $1 | $1:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-install_sh=${install_sh-"$am_aux_dir/install-sh"}
-AC_SUBST(install_sh)])
-
-# Copyright (C) 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing"
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN([`missing' script is too old or missing])
-fi
-])
-
-# Copyright (C) 2003, 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_MKDIR_P
-# ---------------
-# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise.
-#
-# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories
-# created by `make install' are always world readable, even if the
-# installer happens to have an overly restrictive umask (e.g. 077).
-# This was a mistake.  There are at least two reasons why we must not
-# use `-m 0755':
-#   - it causes special bits like SGID to be ignored,
-#   - it may be too restrictive (some setups expect 775 directories).
-#
-# Do not use -m 0755 and let people choose whatever they expect by
-# setting umask.
-#
-# We cannot accept any implementation of `mkdir' that recognizes `-p'.
-# Some implementations (such as Solaris 8's) are not thread-safe: if a
-# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c'
-# concurrently, both version can detect that a/ is missing, but only
-# one can create it and the other will error out.  Consequently we
-# restrict ourselves to GNU make (using the --version option ensures
-# this.)
-AC_DEFUN([AM_PROG_MKDIR_P],
-[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then
-  # We used to keeping the `.' as first argument, in order to
-  # allow $(mkdir_p) to be used without argument.  As in
-  #   $(mkdir_p) $(somedir)
-  # where $(somedir) is conditionally defined.  However this is wrong
-  # for two reasons:
-  #  1. if the package is installed by a user who cannot write `.'
-  #     make install will fail,
-  #  2. the above comment should most certainly read
-  #     $(mkdir_p) $(DESTDIR)$(somedir)
-  #     so it does not work when $(somedir) is undefined and
-  #     $(DESTDIR) is not.
-  #  To support the latter case, we have to write
-  #     test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir),
-  #  so the `.' trick is pointless.
-  mkdir_p='mkdir -p --'
-else
-  # On NextStep and OpenStep, the `mkdir' command does not
-  # recognize any option.  It will interpret all options as
-  # directories to create, and then abort because `.' already
-  # exists.
-  for d in ./-p ./--version;
-  do
-    test -d $d && rmdir $d
-  done
-  # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists.
-  if test -f "$ac_aux_dir/mkinstalldirs"; then
-    mkdir_p='$(mkinstalldirs)'
-  else
-    mkdir_p='$(install_sh) -d'
-  fi
-fi
-AC_SUBST([mkdir_p])])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001, 2002, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# ------------------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), 1)])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ----------------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_RUN_LOG(COMMAND)
-# -------------------
-# Run COMMAND, save the exit status in ac_status, and log it.
-# (This has been adapted from Autoconf's _AC_RUN_LOG macro.)
-AC_DEFUN([AM_RUN_LOG],
-[{ echo "$as_me:$LINENO: $1" >&AS_MESSAGE_LOG_FD
-   ($1) >&AS_MESSAGE_LOG_FD 2>&AS_MESSAGE_LOG_FD
-   ac_status=$?
-   echo "$as_me:$LINENO: \$? = $ac_status" >&AS_MESSAGE_LOG_FD
-   (exit $ac_status); }])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005
-# Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 4
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftest.file
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null`
-   if test "$[*]" = "X"; then
-      # -L didn't work.
-      set X `ls -t $srcdir/configure conftest.file`
-   fi
-   rm -f conftest.file
-   if test "$[*]" != "X $srcdir/configure conftest.file" \
-      && test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-      # If neither matched, then we have a broken ls.  This can happen
-      # if, for instance, CONFIG_SHELL is bash and it inherits a
-      # broken ls alias from the environment.  This has actually
-      # happened.  Such a system could not be considered "sane".
-      AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-alias in your environment])
-   fi
-
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT(yes)])
-
-# Copyright (C) 2001, 2003, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor `install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in `make install-strip', and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using `strip' when the user
-# run `make install-strip'.  However `strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the `STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be `maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004, 2005  Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of `v7', `ustar', or `pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.
-AM_MISSING_PROG([AMTAR], [tar])
-m4_if([$1], [v7],
-     [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of `-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-
-m4_include([acinclude.m4])

check_mssql_health/src/check_mssql_health-1.5.8.2/configure.in

@@ -1,101 +0,0 @@
-dnl Process this file with autoconf to produce a configure script.
-AC_REVISION ($Revision: 1.150 $)
-AC_PREREQ(2.58)
-AC_INIT(check_mssql_health,1.5.8.2)
-AM_INIT_AUTOMAKE([1.9 tar-pax])
-AC_CANONICAL_HOST
-
-RELEASE=1
-AC_SUBST(RELEASE)
-
-AC_PREFIX_DEFAULT(/usr/local/nagios)
-
-dnl Figure out how to invoke "install" and what install options to use.
-AC_PROG_INSTALL
-AC_SUBST(INSTALL)
-
-dnl AC_PROG_CC
-dnl AC_PROG_CPP
-dnl AC_PROG_GCC_TRADITIONAL
-dnl AC_PROG_RANLIB
-
-AC_PROG_MAKE_SET
-
-WARRANTY="This plugin comes with ABSOLUTELY NO WARRANTY. You may redistribute\ncopies of the plugin under the terms of the GNU General Public License.\nFor more information about these matters, see the file named COPYING.\n"
-AC_SUBST(WARRANTY)
-
-SUPPORT="Send email to gerhard.lausser@consol.de if you have questions\nregarding use of this software.\nPlease include version information with all correspondence (when possible,\nuse output from the --version option of the plugin itself).\n"
-AC_SUBST(SUPPORT)
-
-AC_ARG_WITH(nagios_user,
-  ACX_HELP_STRING([--with-nagios-user=USER],
-    [set user name to run nagios]),
-  with_nagios_user=$withval,
-  with_nagios_user=nagios)
-AC_ARG_WITH(nagios_group,
-  ACX_HELP_STRING([--with-nagios-group=GROUP],
-    [set group name to run nagios]),
-  with_nagios_group=$withval,
-  with_nagios_group=nagios)
-AC_SUBST(with_nagios_user)
-AC_SUBST(with_nagios_group)
-INSTALL_OPTS="-o $with_nagios_user -g $with_nagios_group"
-AC_SUBST(INSTALL_OPTS)
-
-AC_ARG_WITH(statefiles_dir,
-  ACX_HELP_STRING([--with-statefiles-dir=PATH],
-    [sets directory for the state files (default=/var/tmp/check_mssql_health)]),
-  with_statefiles_dir=$withval,
-  with_statefiles_dir=/var/tmp/check_mssql_health)
-AC_SUBST(STATEFILES_DIR, $with_statefiles_dir)
-echo variable with_statefiles_dir is $with_statefiles_dir
-
-AC_ARG_WITH(mymodules_dir,
-  ACX_HELP_STRING([--with-mymodules-dir=PATH],
-    [sets directory for own extensions which will be included during the build process (default=/usr/local/nagios/libexec)]),
-  with_mymodules_dir=$withval,
-  with_mymodules_dir=/usr/local/nagios/libexec)
-AC_SUBST(MYMODULES_DIR, $with_mymodules_dir)
-echo variable with_mymodules_dir is $with_mymodules_dir
-
-AC_ARG_WITH(mymodules_dyn_dir,
-  ACX_HELP_STRING([--with-mymodules-dyn-dir=PATH],
-    [sets directory for own extensions which will be included at runtime (default=/usr/local/nagios/libexec)]),
-  with_mymodules_dyn_dir=$withval,
-  with_mymodules_dyn_dir=/usr/local/nagios/libexec)
-AC_SUBST(MYMODULES_DYN_DIR, $with_mymodules_dyn_dir)
-echo variable with_mymodules_dyn_dir is $with_mymodules_dyn_dir
-
-EXTRAS=
-dnl PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/etc:/usr/local/bin:/usr/local/sbin:$PATH
-
-dnl Checks for programs.
-AC_PATH_PROG(SH,sh)
-AC_PATH_PROG(PERL,perl)
-AC_PATH_PROG(GZIP,gzip)
-AC_PATH_PROGS(AWK,gawk nawk /usr/xpg4/bin/awk awk)
-AC_PATH_PROG(GREP,grep)
-AC_PATH_PROG(ECHO,echo)
-AC_PATH_PROG(SED,sed)
-AC_PATH_PROG(CAT,cat)
-
-dnl allow them to override the path of perl
-AC_ARG_WITH(perl,
-  ACX_HELP_STRING([--with-perl=PATH],
-    [sets path to perl executable]),
-  with_perl=$withval,with_perl=$PERL)
-AC_SUBST(PERL, $with_perl)
-
-AC_OUTPUT(
-  Makefile 
-  plugins-scripts/Makefile 
-  plugins-scripts/subst 
-  t/Makefile
-)
-
-ACX_FEATURE([with],[perl])
-ACX_FEATURE([with],[statefiles-dir])
-ACX_FEATURE([with],[nagios-user])
-ACX_FEATURE([with],[nagios-group])
-ACX_FEATURE([with],[mymodules-dir])
-ACX_FEATURE([with],[mymodules-dyn-dir])

check_mssql_health/src/check_mssql_health-1.5.8.2/contrib/README.formula

@@ -1,73 +0,0 @@
-==========================================================================================
-http://www.sqlservercentral.com/Forums/Topic261080-5-1.aspx#bm261128
-
-MachineName     InstanceName    DbName  FileGroupName   AllocatedMb     UsedMb  FreeMb  FreePercent     AutoGrowMb AutoGrowMaxSize
-WIN2K3R2EE      Default master  PRIMARY 4       2       1       49      0.4     2147483647
-WIN2K3R2EE      Default tempdb  PRIMARY 8       1       6       86      0.8     2147483647
-WIN2K3R2EE      Default model   PRIMARY 1       0       0       17      1       2147483647
-WIN2K3R2EE      Default msdb    PRIMARY 4       3       0       15      0.25    2147483647
-WIN2K3R2EE      Default ReportServer    PRIMARY 3       1       1       38      1       2147483647
-WIN2K3R2EE      Default ReportServerTempDB      PRIMARY 2       1       1       53      1       2147483647
-WIN2K3R2EE      Default AdventureWorksDW        PRIMARY 68      60      8       12      16      2147483647
-WIN2K3R2EE      Default AdventureWorks  PRIMARY 163     153     10      6       16      2147483647
-
-
-set nocount on
-create table #DBSpace
-(DbName                sysname
-,FileGroupName        sysname
-,AllocatedMb        integer
-,UsedMb        integer
-,FreeMb        integer
-,FreePercent        integer
-,AutoGrowMb        decimal(12,2)
-,AutoGrowMaxSize        integer
-)
-exec master.dbo.sp_MSForEachDb @command1 = 
-'dbcc updateusage([?]) with no_infomsgs  
-insert into #DBSpace
-select         ''?''
-,        sysFileGroups.groupname
-,         F.AllocatedPages         / 128                  as AllocatedMb
-,        U.UsedPages                 / 128                as UsedMb
-,        (F.AllocatedPages - U.UsedPages) / 128         as FreeMb
-,        (F.AllocatedPages - U.UsedPages) * 100 
-                / F.AllocatedPages                 as FreePercent
-,        CAST(F.GrowthPages / 128.0 as decimal(12,2) )        as AutoGrowMb
-,         F.MaxSize                                 as AutoGrowMaxSize
-FROM        (select GroupId
-        ,        sum( cast(  used as bigint) ) 
-        from         [?].dbo.sysindexes 
-        where        indid in (0,1,255)
-        group by GroupId
-        )        as        U ( GroupId , UsedPages) 
-join        (select GroupId 
-        , sum(cast( size as bigint) )
-        , Max(growth)
-        , MAX(case status & 0x100000
-                WHEN  0x100000 then Growth * Size / 100 -- Increase in Percentage
-                else        Growth                        -- Increase in Pages
-        end)
-        , MAX( case maxsize when -1 then 2147483647 else maxsize end)
-        from         [?].dbo.sysfiles  
-        where (status & 64 = 0)  
-        group by GroupId
-        )        as         F (GroupId , AllocatedPages, Growth, GrowthPages, maxsize)
-        on         F.GroupId = U.groupid
-join        sysFileGroups
-        on sysFileGroups.GroupId        = U.groupId
-'
-
-
-select        CAST( SERVERPROPERTY ('MachineName')                 as nvarchar(128) )        AS MachineName
-,        COALESCE ( CAST( SERVERPROPERTY ('InstanceName')                as nvarchar(128) ) , 'Default')        AS InstanceName
-,        DbName
-,        FileGroupName
-,        AllocatedMb
-,        UsedMb
-,        FreeMb
-,        FreePercent
-,        AutoGrowMb
-,        AutoGrowMaxSize        
-from         #DBSpace 
-

check_mssql_health/src/check_mssql_health-1.5.8.2/contrib/check_mssql_health.php

@@ -1,526 +0,0 @@
-<?php
-#
-# Copyright (c) 2009 Gerhard Lausser (gerhard.lausser@consol.de)
-# Plugin: check_mysql_health (http://www.consol.com/opensource/nagios/check-mysql-health)
-# Release 1.0 2009-03-02
-#
-# This is a template for the visualisation addon PNP (http://www.pnp4nagios.org)
-#
-
-$defcnt = 1;
-
-$green = "33FF00E0";
-$yellow = "FFFF00E0";
-$red = "F83838E0";
-$now = "FF00FF";
-
-foreach ($DS as $i) {
-    $warning = ($WARN[$i] != "") ? $WARN[$i] : "";
-    $warnmin = ($WARN_MIN[$i] != "") ? $WARN_MIN[$i] : "";
-    $warnmax = ($WARN_MAX[$i] != "") ? $WARN_MAX[$i] : "";
-    $critical = ($CRIT[$i] != "") ? $CRIT[$i] : "";
-    $critmin = ($CRIT_MIN[$i] != "") ? $CRIT_MIN[$i] : "";
-    $critmax = ($CRIT_MAX[$i] != "") ? $CRIT_MAX[$i] : "";
-    $minimum = ($MIN[$i] != "") ? $MIN[$i] : "";
-    $maximum = ($MAX[$i] != "") ? $MAX[$i] : "";
-
-    if(preg_match('/^connection_time$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Time to connect";
-        $opt[$defcnt] = "--vertical-label \"Seconds\" --title \"Time to establish a connection to $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:connectiontime=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "AREA:connectiontime#111111 ";
-        $def[$defcnt] .= "VDEF:vconnetiontime=connectiontime,LAST " ;
-        $def[$defcnt] .= "GPRINT:vconnetiontime:\"is %3.2lf Seconds \" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^cpu_busy$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "CPU Busy Time";
-        $opt[$defcnt] = "--vertical-label \"%\" --title \"CPU busy time on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:cpubusy=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ag=cpubusy,$WARN[$i],LE,cpubusy,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,cpubusy,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=cpubusy,$CRIT[$i],LE,cpubusy,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,cpubusy,0,IF ";
-        $def[$defcnt] .= "CDEF:ar=cpubusy,100,LE,cpubusy,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,cpubusy,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:cpubusy#111111:\" \" ";
-        $def[$defcnt] .= "VDEF:vcpubusy=cpubusy,LAST " ;
-        $def[$defcnt] .= "GPRINT:vcpubusy:\"CPU is busy for %3.2lf percent of the time\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^io_busy$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "IO Busy Time";
-        $opt[$defcnt] = "--vertical-label \"%\" --title \"IO busy time on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:iobusy=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ag=iobusy,$WARN[$i],LE,iobusy,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,iobusy,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=iobusy,$CRIT[$i],LE,iobusy,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,iobusy,0,IF ";
-        $def[$defcnt] .= "CDEF:ar=iobusy,100,LE,iobusy,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,iobusy,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:iobusy#111111:\" \" ";
-        $def[$defcnt] .= "VDEF:viobusy=iobusy,LAST " ;
-        $def[$defcnt] .= "GPRINT:viobusy:\"IO is busy for %3.2lf percent of the time\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^full_scans_per_sec$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Full Table Scans / Sec";
-        $opt[$defcnt] = "--vertical-label \"scans / sec\" --title \"Full table scans / sec on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:fullscans=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ag=fullscans,$WARN[$i],LE,fullscans,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,fullscans,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=fullscans,$CRIT[$i],LE,fullscans,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,fullscans,0,IF ";
-        $def[$defcnt] .= "CDEF:ar=fullscans,INF,LE,fullscans,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,fullscans,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:fullscans#000000:\" \" ";
-        $def[$defcnt] .= "VDEF:vfullscans=fullscans,LAST " ;
-        $def[$defcnt] .= "GPRINT:vfullscans:\"%3.2lf full table scans / sec\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^connected_users$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Connected Users";
-        $opt[$defcnt] = "--vertical-label \"Users\" --title \"Users connected to $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:users=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ag=users,$WARN[$i],LE,users,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,users,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=users,$CRIT[$i],LE,users,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,users,0,IF ";
-        $def[$defcnt] .= "CDEF:ar=users,INF,LE,users,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,users,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:users#000000:\"connected users \" ";
-        $def[$defcnt] .= "VDEF:lvusers=users,LAST " ;
-        $def[$defcnt] .= "VDEF:mvusers=users,MAXIMUM " ;
-        $def[$defcnt] .= "VDEF:avusers=users,AVERAGE " ;
-        $def[$defcnt] .= "GPRINT:lvusers:\"%.0lf LAST \" " ;
-        $def[$defcnt] .= "GPRINT:mvusers:\"%.0lf MAX \" " ;
-        $def[$defcnt] .= "GPRINT:avusers:\"%.0lf AVERAGE \" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^.*_transactions_per_sec/', $NAME[$i])) {
-        # if exists array dbs && > 0 -> next
-        if(isset($dbs)) continue; # da muss rein, dass $servicedesc schon gezeichnet wurde.
-        # hash bauen mit database als key
-        $dbs = array();
-        $dsnr = array();
-        $units = array();
-        $numds = 1;
-        $colors = array("#ff0000","#00ffff","#0000ff","#00ff00"); #.....fuer singlegraph
-        $multigraph = 0;
-        foreach ($DS as $t) {
-            if(preg_match('/^(.*)_transactions_per_sec/', $NAME[$t], $match)) {
-              $dbs[] = $match[1];
-            }
-            $dsnr[] = $DS[$t];
-            $units[] = $UNIT[$t];
-            $warn[] = $WARN[$t];
-            $crit[] = $CRIT[$t];
-        }
-        foreach ($dbs as $key => $db) {
-            $ds_transactions = $dsnr[$key * $numds];
-            $units_transactions = $units[$key * $numds];
-            $warn_transactions = $warn[$key * $numds];
-            $crit_transactions = $crit[$key * $numds];
-            # eine zweite ds wuerde so aussehen
-            # $ds_used = $dsnr[$key * $numds + 1];
-            # aber transactions hat nur 1 ds
-            $ds_name[$defcnt] = "Transactions / sec of DB $db";
-            $opt[$defcnt] = "--vertical-label \"Transactions/s\" -l0 --title \"Database $db transactions / sec\" ";
-            $def[$defcnt] =  "DEF:trans=$rrdfile:".$ds_transactions.":AVERAGE " ;
-            if ($multigraph) {
-              $def[$defcnt] .= "CDEF:ag=trans,$WARN[$i],LE,trans,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,trans,0,IF ";
-              $def[$defcnt] .= "CDEF:ay=trans,$CRIT[$i],LE,trans,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,trans,0,IF ";
-              $def[$defcnt] .= "CDEF:ar=trans,100,LE,trans,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,trans,0,IF ";
-              $def[$defcnt] .= "AREA:ag#$green: " ;
-              $def[$defcnt] .= "AREA:ay#$yellow: " ;
-              $def[$defcnt] .= "AREA:ar#$red: " ;
-              $def[$defcnt] .= "LINE0.6:trans#000000:\"$db\" " ;
-            } else {
-              $def[$defcnt] =  "DEF:trans=$rrdfile:".$ds_transactions.":AVERAGE " ;
-              $def[$defcnt] .= "AREA:trans#F2F2F2:\"\" " ;
-              $def[$defcnt] .= "LINE1:trans$colors[$multigraph]:\"$db\" " ;
-            }
-            $def[$defcnt] .= "GPRINT:trans:LAST:\"%3.2lf/s LAST \" ";
-            $def[$defcnt] .= "GPRINT:trans:MAX:\"%3.2lf/s MAX \" ";
-            $def[$defcnt] .= "GPRINT:trans:AVERAGE:\"%3.2lf/s AVERAGE \\n\" ";
-            if ($multigraph) {
-              $defcnt++;
-            }
-        }
-    }
-    if(preg_match('/^latch_waits_per_sec$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Latch Waits / Sec";
-        $opt[$defcnt] = "--vertical-label \"waits / sec\" --title \"Latch waits / sec on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:waits=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ag=waits,$WARN[$i],LE,waits,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,waits,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=waits,$CRIT[$i],LE,waits,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,waits,0,IF ";
-        $def[$defcnt] .= "CDEF:ar=waits,INF,LE,waits,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,waits,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:waits#000000:\" \" ";
-        $def[$defcnt] .= "VDEF:vwaits=waits,LAST " ;
-        $def[$defcnt] .= "GPRINT:vwaits:\"%3.2lf waits / sec\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^latch_avg_wait_time$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Latch Wait Time";
-        $opt[$defcnt] = "--vertical-label \"msec\" --title \"Latch avg wait time on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:waittime=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ag=waittime,$WARN[$i],LE,waittime,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,waittime,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=waittime,$CRIT[$i],LE,waittime,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,waittime,0,IF ";
-        $def[$defcnt] .= "CDEF:ar=waittime,INF,LE,waittime,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,waittime,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:waittime#000000:\" \" ";
-        $def[$defcnt] .= "VDEF:vwaittime=waittime,LAST " ;
-        $def[$defcnt] .= "GPRINT:vwaittime:\"%3.2lf waittime (milliseconds)\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^sql_initcompilations_per_sec$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Initial Compilations";
-        $opt[$defcnt] = "--vertical-label \"initcomps/s\" --title \"Initial compilations / sec on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:comps=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ag=comps,$WARN[$i],LE,comps,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,comps,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=comps,$CRIT[$i],LE,comps,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,comps,0,IF ";
-        $def[$defcnt] .= "CDEF:ar=comps,INF,LE,comps,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,comps,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:comps#000000:\" \" ";
-        $def[$defcnt] .= "VDEF:vcomps=comps,LAST " ;
-        $def[$defcnt] .= "GPRINT:vcomps:\"%3.2lf initial compilations / sec\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^sql_recompilations_per_sec$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Re-Compilations";
-        $opt[$defcnt] = "--vertical-label \"re-comps/s\" --title \"Re-Compilations / sec on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:comps=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ag=comps,$WARN[$i],LE,comps,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,comps,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=comps,$CRIT[$i],LE,comps,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,comps,0,IF ";
-        $def[$defcnt] .= "CDEF:ar=comps,INF,LE,comps,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,comps,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:comps#000000:\" \" ";
-        $def[$defcnt] .= "VDEF:vcomps=comps,LAST " ;
-        $def[$defcnt] .= "GPRINT:vcomps:\"%3.2lf re-compilations / sec\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^batch_requests_per_sec$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Batch Requests";
-        $opt[$defcnt] = "--vertical-label \"batchreqs/s\" --title \"Batch requests / sec on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:breqs=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ag=breqs,$WARN[$i],LE,breqs,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,breqs,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=breqs,$CRIT[$i],LE,breqs,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,breqs,0,IF ";
-        $def[$defcnt] .= "CDEF:ar=breqs,INF,LE,breqs,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,breqs,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:breqs#000000:\" \" ";
-        $def[$defcnt] .= "VDEF:lvbreqs=breqs,LAST " ;
-        $def[$defcnt] .= "VDEF:avbreqs=breqs,AVERAGE " ;
-        $def[$defcnt] .= "VDEF:mvbreqs=breqs,MAXIMUM " ;
-        $def[$defcnt] .= "GPRINT:lvbreqs:\"%3.2lf batch requests / sec \" " ;
-        $def[$defcnt] .= "GPRINT:avbreqs:\"(AVERAGE\: %3.2lf\" " ;
-        $def[$defcnt] .= "GPRINT:mvbreqs:\"MAX %3.2lf)\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^checkpoint_pages_per_sec$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Checpoint Pages";
-        $opt[$defcnt] = "--vertical-label \"pages/s\" --title \"Flushed pages / sec on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:pages=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ag=pages,$WARN[$i],LE,pages,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,pages,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=pages,$CRIT[$i],LE,pages,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,pages,0,IF ";
-        $def[$defcnt] .= "CDEF:ar=pages,INF,LE,pages,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,pages,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:pages#000000:\" \" ";
-        $def[$defcnt] .= "VDEF:lvpages=pages,LAST " ;
-        $def[$defcnt] .= "VDEF:avpages=pages,AVERAGE " ;
-        $def[$defcnt] .= "VDEF:mvpages=pages,MAXIMUM " ;
-        $def[$defcnt] .= "GPRINT:lvpages:\"%3.2lf pages flushed / sec \" " ;
-        $def[$defcnt] .= "GPRINT:avpages:\"(AVERAGE\: %3.2lf\" " ;
-        $def[$defcnt] .= "GPRINT:mvpages:\"MAX %3.2lf)\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^free_list_stalls_per_sec$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Free List Stalls";
-        $opt[$defcnt] = "--vertical-label \"stalls/s\" --title \"Free list stalls / sec on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:stalls=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ag=stalls,$WARN[$i],LE,stalls,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,stalls,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=stalls,$CRIT[$i],LE,stalls,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,stalls,0,IF ";
-        $def[$defcnt] .= "CDEF:ar=stalls,INF,LE,stalls,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,stalls,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:stalls#000000:\" \" ";
-        $def[$defcnt] .= "VDEF:lvstalls=stalls,LAST " ;
-        $def[$defcnt] .= "VDEF:avstalls=stalls,AVERAGE " ;
-        $def[$defcnt] .= "VDEF:mvstalls=stalls,MAXIMUM " ;
-        $def[$defcnt] .= "GPRINT:lvstalls:\"%3.2lf free list stalls / sec \" " ;
-        $def[$defcnt] .= "GPRINT:avstalls:\"(AVERAGE\: %3.2lf\" " ;
-        $def[$defcnt] .= "GPRINT:mvstalls:\"MAX %3.2lf)\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^lazy_writes_per_sec$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Lazy Writes";
-        $opt[$defcnt] = "--vertical-label \"lazyw/s\" --title \"Lazy writes / sec on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:lazyw=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ag=lazyw,$WARN[$i],LE,lazyw,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,lazyw,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=lazyw,$CRIT[$i],LE,lazyw,$WARN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,lazyw,0,IF ";
-        $def[$defcnt] .= "CDEF:ar=lazyw,INF,LE,lazyw,$CRIT[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,lazyw,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:lazyw#000000:\" \" ";
-        $def[$defcnt] .= "VDEF:lvlazyw=lazyw,LAST " ;
-        $def[$defcnt] .= "VDEF:avlazyw=lazyw,AVERAGE " ;
-        $def[$defcnt] .= "VDEF:mvlazyw=lazyw,MAXIMUM " ;
-        $def[$defcnt] .= "GPRINT:lvlazyw:\"%3.2lf lazy writes / sec \" " ;
-        $def[$defcnt] .= "GPRINT:avlazyw:\"(AVERAGE\: %3.2lf\" " ;
-        $def[$defcnt] .= "GPRINT:mvlazyw:\"MAX %3.2lf)\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^page_life_expectancy$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Page Life Expectancy";
-        $opt[$defcnt] = "--vertical-label \"s\" --title \"Page life expectancy on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:lifeexp=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ar=lifeexp,$CRIT_MIN[$i],LE,lifeexp,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,lifeexp,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=lifeexp,$WARN_MIN[$i],LE,lifeexp,$CRIT_MIN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,lifeexp,0,IF ";
-        $def[$defcnt] .= "CDEF:ag=lifeexp,INF,LE,lifeexp,$WARN_MIN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,lifeexp,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:lifeexp#000000:\" \" ";
-        $def[$defcnt] .= "VDEF:lvlifeexp=lifeexp,LAST " ;
-        $def[$defcnt] .= "VDEF:avlifeexp=lifeexp,AVERAGE " ;
-        $def[$defcnt] .= "VDEF:mvlifeexp=lifeexp,MINIMUM " ;
-        $def[$defcnt] .= "GPRINT:lvlifeexp:\"Page life expectancy is %3.2lf seconds \" " ;
-        $def[$defcnt] .= "GPRINT:avlifeexp:\"(AVERAGE\: %3.2lf\" " ;
-        $def[$defcnt] .= "GPRINT:mvlifeexp:\"MIN %3.2lf)\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^total_server_memory$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Total Server memory";
-        $opt[$defcnt] = "--vertical-label \"Bytes\" --title \"Total sql server memory on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:threads=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "AREA:threads#111111 ";
-        $def[$defcnt] .= "VDEF:vthreads=threads,LAST " ;
-        $def[$defcnt] .= "GPRINT:vthreads:\"%.0lf Bytes \" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^buffer_cache_hit_ratio$/', $NAME[$i])) {
-        $ds_name[$defcnt] = "Buffer Cache Hit Ratio";
-        $opt[$defcnt] = "--vertical-label \"%\" --title \"Buffer cache hit ratio on $hostname\" ";
-        $def[$defcnt] = "";
-        $def[$defcnt] .= "DEF:bufcahitrat=$rrdfile:$DS[$i]:AVERAGE:reduce=LAST " ;
-        $def[$defcnt] .= "CDEF:ar=bufcahitrat,$CRIT_MIN[$i],LE,bufcahitrat,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,bufcahitrat,0,IF ";
-        $def[$defcnt] .= "CDEF:ay=bufcahitrat,$WARN_MIN[$i],LE,bufcahitrat,$CRIT_MIN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,bufcahitrat,0,IF ";
-        $def[$defcnt] .= "CDEF:ag=bufcahitrat,100,LE,bufcahitrat,$WARN_MIN[$i],GT,INF,UNKN,IF,UNKN,IF,ISINF,bufcahitrat,0,IF ";
-        $def[$defcnt] .= "AREA:ag#$green: " ;
-        $def[$defcnt] .= "AREA:ay#$yellow: " ;
-        $def[$defcnt] .= "AREA:ar#$red: " ;
-        $def[$defcnt] .= "LINE0.6:bufcahitrat#000000:\" \" ";
-        $def[$defcnt] .= "VDEF:vbufcahitrat=bufcahitrat,LAST " ;
-        $def[$defcnt] .= "GPRINT:vbufcahitrat:\"Hit ratio is %3.2lf percent\\n\" " ;
-        $defcnt++;
-    }
-    if(preg_match('/^.*_lock_timeouts_per_sec/', $NAME[$i])) {
-        # if exists array locks && > 0 -> next
-        if(isset($locks)) continue;
-        # hash bauen mit tablespace als key
-        $locks = array();
-        $dsnr = array();
-        $units = array();
-        $numds = 2;
-        foreach ($DS as $t) {
-            if(preg_match('/^(.*)_lock_timeouts_per_sec/', $NAME[$t], $match)) {
-              $locks[] = $match[1];
-            }
-            $dsnr[] = $DS[$t];
-            $units[] = $UNIT[$t];
-            $warn[] = $WARN[$t];
-            $crit[] = $CRIT[$t];
-            $warn_min[] = $WARN_MIN[$t];
-            $crit_min[] = $CRIT_MIN[$t];
-        }
-        foreach ($locks as $key => $lock) {
-            $lock_timeouts_per_sec = $dsnr[$key * $numds];
-            $unit_lock_timeouts_per_sec = $units[$key * $numds];
-            $warn= $warn[$key * $numds];
-            $crit= $crit[$key * $numds];
-
-            $ds_name[$defcnt] = "Lock Timeouts Per Second";
-            $opt[$defcnt] = "--vertical-label \"timeouts / sec\" -l0 --title \"Timeouts / sec for lock $lock on $hostname \" ";
-            $def[$defcnt] =  "DEF:timeouts=$rrdfile:".$lock_timeouts_per_sec.":AVERAGE " ;
-            $def[$defcnt] .= "CDEF:ag=timeouts,$warn,LE,timeouts,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,timeouts,0,IF ";
-            $def[$defcnt] .= "CDEF:ay=timeouts,$crit,LE,timeouts,$warn,GT,INF,UNKN,IF,UNKN,IF,ISINF,timeouts,0,IF ";
-            $def[$defcnt] .= "CDEF:ar=timeouts,INF,LE,timeouts,$crit,GT,INF,UNKN,IF,UNKN,IF,ISINF,timeouts,0,IF ";
-            $def[$defcnt] .= "AREA:ag#$green: " ;
-            $def[$defcnt] .= "AREA:ay#$yellow: " ;
-            $def[$defcnt] .= "AREA:ar#$red: " ;
-            $def[$defcnt] .= "LINE0.6:timeouts#000000:\" \" ";
-            $def[$defcnt] .= "VDEF:vtimeouts=timeouts,LAST " ;
-            $def[$defcnt] .= "GPRINT:vtimeouts:\"%8.3lf timeouts / sec\" ";
-            $defcnt++;
-        }
-    }
-    if(preg_match('/^.*_lock_waits_per_sec/', $NAME[$i])) {
-        # if exists array locks && > 0 -> next
-        if(isset($locks)) continue;
-        # hash bauen mit tablespace als key
-        $locks = array();
-        $dsnr = array();
-        $units = array();
-        $numds = 2;
-        foreach ($DS as $t) {
-            if(preg_match('/^(.*)_lock_waits_per_sec/', $NAME[$t], $match)) {
-              $locks[] = $match[1];
-            }
-            $dsnr[] = $DS[$t];
-            $units[] = $UNIT[$t];
-            $warn[] = $WARN[$t];
-            $crit[] = $CRIT[$t];
-            $warn_min[] = $WARN_MIN[$t];
-            $crit_min[] = $CRIT_MIN[$t];
-        }
-        foreach ($locks as $key => $lock) {
-            $lock_waits_per_sec = $dsnr[$key * $numds];
-            $unit_lock_waits_per_sec = $units[$key * $numds];
-            $warn= $warn[$key * $numds];
-            $crit= $crit[$key * $numds];
-
-            $ds_name[$defcnt] = "Lock waits Per Second";
-            $opt[$defcnt] = "--vertical-label \"waits / sec\" -l0 --title \"Waits / sec for lock $lock on $hostname \" ";
-            $def[$defcnt] =  "DEF:waits=$rrdfile:".$lock_waits_per_sec.":AVERAGE " ;
-            $def[$defcnt] .= "CDEF:ag=waits,$crit,LE,waits,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,waits,0,IF ";
-            $def[$defcnt] .= "CDEF:ay=waits,$warn,LE,waits,$crit,GT,INF,UNKN,IF,UNKN,IF,ISINF,waits,0,IF ";
-            $def[$defcnt] .= "CDEF:ar=waits,100,LE,waits,$warn,GT,INF,UNKN,IF,UNKN,IF,ISINF,waits,0,IF ";
-            $def[$defcnt] .= "AREA:ag#$green: " ;
-            $def[$defcnt] .= "AREA:ay#$yellow: " ;
-            $def[$defcnt] .= "AREA:ar#$red: " ;
-            $def[$defcnt] .= "LINE0.6:waits#000000:\" \" ";
-            $defcnt++;
-        }
-    }
-    if(preg_match('/^.*_deadlocks_per_sec/', $NAME[$i])) {
-        # if exists array locks && > 0 -> next
-        if(isset($locks)) continue;
-        # hash bauen mit tablespace als key
-        $locks = array();
-        $dsnr = array();
-        $units = array();
-        $numds = 2;
-        foreach ($DS as $t) {
-            if(preg_match('/^(.*)_deadlocks_per_sec/', $NAME[$t], $match)) {
-              $locks[] = $match[1];
-            }
-            $dsnr[] = $DS[$t];
-            $units[] = $UNIT[$t];
-            $warn[] = $WARN[$t];
-            $crit[] = $CRIT[$t];
-            $warn_min[] = $WARN_MIN[$t];
-            $crit_min[] = $CRIT_MIN[$t];
-        }
-        foreach ($locks as $key => $lock) {
-            $lock_deadlocks_per_sec = $dsnr[$key * $numds];
-            $unit_lock_deadlocks_per_sec = $units[$key * $numds];
-            $warn= $warn[$key * $numds];
-            $crit= $crit[$key * $numds];
-
-            $ds_name[$defcnt] = "Deadlocks Per Second";
-            $opt[$defcnt] = "--vertical-label \"deadlocks / sec\" -l0 --title \"Deadlocks / sec for lock $lock on $hostname \" ";
-            $def[$defcnt] =  "DEF:deadlocks=$rrdfile:".$lock_deadlocks_per_sec.":AVERAGE " ;
-            $def[$defcnt] .= "CDEF:ag=deadlocks,$crit,LE,deadlocks,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,deadlocks,0,IF ";
-            $def[$defcnt] .= "CDEF:ay=deadlocks,$warn,LE,deadlocks,$crit,GT,INF,UNKN,IF,UNKN,IF,ISINF,deadlocks,0,IF ";
-            $def[$defcnt] .= "CDEF:ar=deadlocks,100,LE,deadlocks,$warn,GT,INF,UNKN,IF,UNKN,IF,ISINF,deadlocks,0,IF ";
-            $def[$defcnt] .= "AREA:ag#$green: " ;
-            $def[$defcnt] .= "AREA:ay#$yellow: " ;
-            $def[$defcnt] .= "AREA:ar#$red: " ;
-            $defcnt++;
-        }
-    }
-    if(preg_match('/^db_.*_free_pct/', $NAME[$i])) {
-        # if exists array dbs && > 0 -> next
-        if(isset($dbs)) continue;
-        # hash bauen mit tablespace als key
-        $dbs = array();
-        $dsnr = array();
-        $units = array();
-        $numds = 3;
-        $colors = array("#000000","#00ffff","#0000ff");
-        foreach ($DS as $t) {
-            if(preg_match('/^db_(.*)_free_pct/', $NAME[$t], $match)) {
-              $dbs[] = $match[1];
-            }
-            $dsnr[] = $DS[$t];
-            $act[] = $ACT[$t];
-            $units[] = $UNIT[$t];
-            $warn[] = $WARN[$t];
-            $crit[] = $CRIT[$t];
-            $warn_min[] = $WARN_MIN[$t];
-            $crit_min[] = $CRIT_MIN[$t];
-            $max[] = $MAX[$t];
-            $min[] = $MIN[$t];
-        }
-        foreach ($dbs as $key => $db) {
-            $db_free_pct = $dsnr[$key * $numds];
-            $db_free_mb = $dsnr[$key * $numds + 1];
-            $db_free_mb_val = $act[$key * $numds + 1];
-            $max_free_mb = $max[$key * $numds + 1];
-            $db_alloc_pct = $dsnr[$key * $numds + 2];
-            $unit_free_pct = $units[$key * $numds];
-            $unit_free_mb = $units[$key * $numds + 1];
-            $warn_free_pct = $warn_min[$key * $numds];
-            $crit_free_pct = $crit_min[$key * $numds];
-
-            $ds_name[$defcnt] = "DB free space %";
-            $opt[$defcnt] = "--vertical-label \"DB free space %\" -u102 -l0 --title \"Database $db free space \" ";
-            $def[$defcnt] =  "DEF:free=$rrdfile:".$db_free_pct.":AVERAGE " ;
-            $def[$defcnt] .=  "DEF:allocated=$rrdfile:".$db_alloc_pct.":AVERAGE " ;
-            $def[$defcnt] .=  "DEF:freemb=$rrdfile:".$db_free_mb.":AVERAGE " ;
-            $def[$defcnt] .= "CDEF:ar=free,$crit_free_pct,LE,free,0,GT,INF,UNKN,IF,UNKN,IF,ISINF,free,0,IF ";
-            $def[$defcnt] .= "CDEF:ay=free,$warn_free_pct,LE,free,$crit_free_pct,GT,INF,UNKN,IF,UNKN,IF,ISINF,free,0,IF ";
-            $def[$defcnt] .= "CDEF:ag=free,100,LE,free,$warn_free_pct,GT,INF,UNKN,IF,UNKN,IF,ISINF,free,0,IF ";
-            $def[$defcnt] .= "CDEF:used=100,free,- ";
-            $def[$defcnt] .= "AREA:ag#$green: " ;
-            $def[$defcnt] .= "AREA:ay#$yellow: " ;
-            $def[$defcnt] .= "AREA:ar#$red: " ;
-            $def[$defcnt] .= "LINE0.6:free#000000:\" \" ";
-            $def[$defcnt] .= "AREA:used#00000030::STACK " ;
-            $def[$defcnt] .= "VDEF:lvfree=free,LAST " ;
-            $def[$defcnt] .= "VDEF:lvfreemb=freemb,LAST " ;
-            $def[$defcnt] .= "GPRINT:lvfree:\"Database $db has %.2lf%% free space left \" ";
-            $def[$defcnt] .= "COMMENT:\"($db_free_mb_val of $max_free_mb$unit_free_mb)\\n\" ";
-            $def[$defcnt] .= "COMMENT:\"($warn_free_pct $crit_free_pct\" ";
-            $def[$defcnt] .= "LINE1:allocated#FFFFFF:\" \" ";
-            $def[$defcnt] .= "VDEF:lvallocated=allocated,LAST " ;
-            $def[$defcnt] .= "GPRINT:lvallocated:\"Database $db has %.2lf%% allocated\\n\" ";
-            $defcnt++;
-        }
-    }
-}
-if(isset($dbs)) unset($dbs);
-if(isset($locks)) unset($locks);
-if(isset($warn)) unset($warn);
-if(isset($crit)) unset($crit);
-?>
-

check_mssql_health/src/check_mssql_health-1.5.8.2/contrib/create_user.sql

@@ -1,68 +0,0 @@
-declare @dbname varchar(255)
-declare @check_mssql_health_USER varchar(255)
-declare @check_mssql_health_PASS varchar(255)
-declare @check_mssql_health_ROLE varchar(255)
-declare @source varchar(255)
-declare @options varchar(255)
-declare @backslash int
-
-/*******************************************************************/
-SET @check_mssql_health_USER = '"[Servername|Domainname]\Username"'
-SET @check_mssql_health_PASS = 'Password'
-SET @check_mssql_health_ROLE = 'Rolename'
-/*******************************************************************
-
-PLEASE CHANGE THE ABOVE VALUES ACCORDING TO YOUR REQUIREMENTS
-
-- Example for Windows authentication:
-  SET @check_mssql_health_USER = '"[Servername|Domainname]\Username"'
-  SET @check_mssql_health_ROLE = 'Rolename'
-
-- Example for SQL Server authentication:
-  SET @check_mssql_health_USER = 'Username'
-  SET @check_mssql_health_PASS = 'Password'
-  SET @check_mssql_health_ROLE = 'Rolename'
-
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-It is strongly recommended to use Windows authentication. Otherwise
-you will get no reliable results for database usage.
-!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
-
-*********** NO NEED TO CHANGE ANYTHING BELOW THIS LINE *************/
-
-SET @options = 'DEFAULT_DATABASE=MASTER, DEFAULT_LANGUAGE=English'
-SET @backslash = (SELECT CHARINDEX('\', @check_mssql_health_USER))
-IF @backslash > 0
-  BEGIN
-    SET @source = ' FROM WINDOWS'
-    SET @options = ' WITH ' + @options
-  END
-ELSE
-  BEGIN
-    SET @source = ''
-    SET @options = ' WITH PASSWORD=''' + @check_mssql_health_PASS + ''',' + @options
-  END
-
-PRINT 'create Nagios plugin user ' + @check_mssql_health_USER
-EXEC ('CREATE LOGIN ' + @check_mssql_health_USER + @source + @options)
-EXEC ('USE MASTER GRANT VIEW SERVER STATE TO ' + @check_mssql_health_USER)
-PRINT 'User ' + @check_mssql_health_USER + ' created.'
-PRINT ''
-
-declare dblist cursor for
-  select name from sysdatabases WHERE name NOT IN ('master', 'tempdb', 'msdb') open dblist
-    fetch next from dblist into @dbname
-    while @@fetch_status = 0 begin
-      EXEC ('USE ' + @dbname + ' print ''Grant permissions in the db '' + ''"'' + DB_NAME() + ''"''')
-      EXEC ('USE ' + @dbname + ' CREATE ROLE ' + @check_mssql_health_ROLE)
-      EXEC ('USE ' + @dbname + ' GRANT EXECUTE TO ' + @check_mssql_health_ROLE)
-      EXEC ('USE ' + @dbname + ' GRANT VIEW DATABASE STATE TO ' + @check_mssql_health_ROLE)
-      EXEC ('USE ' + @dbname + ' GRANT VIEW DEFINITION TO ' + @check_mssql_health_ROLE)
-      EXEC ('USE ' + @dbname + ' CREATE USER ' + @check_mssql_health_USER + ' FOR LOGIN ' + @check_mssql_health_USER)
-      EXEC ('USE ' + @dbname + ' EXEC sp_addrolemember ' + @check_mssql_health_ROLE + ' , ' + @check_mssql_health_USER)
-      EXEC ('USE ' + @dbname + ' print ''Permissions in the db '' + ''"'' + DB_NAME() + ''" granted.''')
-      fetch next from dblist into @dbname
-    end
-close dblist
-deallocate dblist
-

check_mssql_health/src/check_mssql_health-1.5.8.2/contrib/delete_user.sql

@@ -1,30 +0,0 @@
-declare @dbname varchar(255)
-declare @check_mssql_health_USER varchar(255)
-declare @check_mssql_health_ROLE varchar(255)
-
-SET @check_mssql_health_USER = '"[Servername|Domainname]\Username"'
-SET @check_mssql_health_ROLE = 'Rolename'
-
-declare dblist cursor for
-  select name from sysdatabases WHERE name NOT IN ('master', 'tempdb', 'msdb') open dblist
-    fetch next from dblist into @dbname
-    while @@fetch_status = 0 begin
-      EXEC ('USE ' + @dbname + ' print ''Revoke permissions in the db '' + ''"'' + DB_NAME() + ''"''')
-      EXEC ('USE ' + @dbname + ' EXEC sp_droprolemember ' + @check_mssql_health_ROLE + ' , ' + @check_mssql_health_USER)
-      EXEC ('USE ' + @dbname + ' DROP USER ' + @check_mssql_health_USER)               
-      EXEC ('USE ' + @dbname + ' REVOKE VIEW DEFINITION TO ' + @check_mssql_health_ROLE)
-      EXEC ('USE ' + @dbname + ' REVOKE VIEW DATABASE STATE TO ' + @check_mssql_health_ROLE)
-      EXEC ('USE ' + @dbname + ' REVOKE EXECUTE TO ' + @check_mssql_health_ROLE)
-      EXEC ('USE ' + @dbname + ' DROP ROLE ' + @check_mssql_health_ROLE)
-      EXEC ('USE ' + @dbname + ' print ''Permissions in the db '' + ''"'' + DB_NAME() + ''" revoked.''')
-      fetch next from dblist into @dbname
-    end
-close dblist
-deallocate dblist
-
-PRINT ''
-PRINT 'drop Nagios plugin user ' + @check_mssql_health_USER
-EXEC ('USE MASTER REVOKE VIEW SERVER STATE TO ' + @check_mssql_health_USER)
-EXEC ('DROP LOGIN ' + @check_mssql_health_USER)
-PRINT 'User ' + @check_mssql_health_USER + ' dropped.'
-

check_mssql_health/src/check_mssql_health-1.5.8.2/install-sh

@@ -1,295 +0,0 @@
-#!/bin/sh
-# install - install a program, script, or datafile
-
-scriptversion=2003-09-24.23
-
-# This originates from X11R5 (mit/util/scripts/install.sh), which was
-# later released in X11R6 (xc/config/util/install.sh) with the
-# following copyright and license.
-#
-# Copyright (C) 1994 X Consortium
-#
-# Permission is hereby granted, free of charge, to any person obtaining a copy
-# of this software and associated documentation files (the "Software"), to
-# deal in the Software without restriction, including without limitation the
-# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or
-# sell copies of the Software, and to permit persons to whom the Software is
-# furnished to do so, subject to the following conditions:
-#
-# The above copyright notice and this permission notice shall be included in
-# all copies or substantial portions of the Software.
-#
-# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
-# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
-# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
-# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
-# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC-
-# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
-#
-# Except as contained in this notice, the name of the X Consortium shall not
-# be used in advertising or otherwise to promote the sale, use or other deal-
-# ings in this Software without prior written authorization from the X Consor-
-# tium.
-#
-#
-# FSF changes to this file are in the public domain.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=
-transform_arg=
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=
-chgrpcmd=
-stripcmd=
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=
-dst=
-dir_arg=
-
-usage="Usage: $0 [OPTION]... SRCFILE DSTFILE
-   or: $0 -d DIR1 DIR2...
-
-In the first form, install SRCFILE to DSTFILE, removing SRCFILE by default.
-In the second, create the directory path DIR.
-
-Options:
--b=TRANSFORMBASENAME
--c         copy source (using $cpprog) instead of moving (using $mvprog).
--d         create directories instead of installing files.
--g GROUP   $chgrp installed files to GROUP.
--m MODE    $chmod installed files to MODE.
--o USER    $chown installed files to USER.
--s         strip installed files (using $stripprog).
--t=TRANSFORM
---help     display this help and exit.
---version  display version info and exit.
-
-Environment variables override the default commands:
-  CHGRPPROG CHMODPROG CHOWNPROG CPPROG MKDIRPROG MVPROG RMPROG STRIPPROG
-"
-
-while test -n "$1"; do
-  case $1 in
-    -b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-        shift
-        continue;;
-
-    -c) instcmd=$cpprog
-        shift
-        continue;;
-
-    -d) dir_arg=true
-        shift
-        continue;;
-
-    -g) chgrpcmd="$chgrpprog $2"
-        shift
-        shift
-        continue;;
-
-    --help) echo "$usage"; exit 0;;
-
-    -m) chmodcmd="$chmodprog $2"
-        shift
-        shift
-        continue;;
-
-    -o) chowncmd="$chownprog $2"
-        shift
-        shift
-        continue;;
-
-    -s) stripcmd=$stripprog
-        shift
-        continue;;
-
-    -t=*) transformarg=`echo $1 | sed 's/-t=//'`
-        shift
-        continue;;
-
-    --version) echo "$0 $scriptversion"; exit 0;;
-
-    *)  if test -z "$src"; then
-          src=$1
-        else
-          # this colon is to work around a 386BSD /bin/sh bug
-          :
-          dst=$1
-        fi
-        shift
-        continue;;
-  esac
-done
-
-if test -z "$src"; then
-  echo "$0: no input file specified." >&2
-  exit 1
-fi
-
-# Protect names starting with `-'.
-case $src in
-  -*) src=./$src ;;
-esac
-
-if test -n "$dir_arg"; then
-  dst=$src
-  src=
-
-  if test -d "$dst"; then
-    instcmd=:
-    chmodcmd=
-  else
-    instcmd=$mkdirprog
-  fi
-else
-  # Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-  # might cause directories to be created, which would be especially bad
-  # if $src (and thus $dsttmp) contains '*'.
-  if test ! -f "$src" && test ! -d "$src"; then
-    echo "$0: $src does not exist." >&2
-    exit 1
-  fi
-
-  if test -z "$dst"; then
-    echo "$0: no destination specified." >&2
-    exit 1
-  fi
-
-  # Protect names starting with `-'.
-  case $dst in
-    -*) dst=./$dst ;;
-  esac
-
-  # If destination is a directory, append the input filename; won't work
-  # if double slashes aren't ignored.
-  if test -d "$dst"; then
-    dst=$dst/`basename "$src"`
-  fi
-fi
-
-# This sed command emulates the dirname command.
-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-
-# Skip lots of stat calls in the usual case.
-if test ! -d "$dstdir"; then
-  defaultIFS='
-	'
-  IFS="${IFS-$defaultIFS}"
-
-  oIFS=$IFS
-  # Some sh's can't handle IFS=/ for some reason.
-  IFS='%'
-  set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-  IFS=$oIFS
-
-  pathcomp=
-
-  while test $# -ne 0 ; do
-    pathcomp=$pathcomp$1
-    shift
-    test -d "$pathcomp" || $mkdirprog "$pathcomp"
-    pathcomp=$pathcomp/
-  done
-fi
-
-if test -n "$dir_arg"; then
-  $doit $instcmd "$dst" \
-    && { test -z "$chowncmd" || $doit $chowncmd "$dst"; } \
-    && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } \
-    && { test -z "$stripcmd" || $doit $stripcmd "$dst"; } \
-    && { test -z "$chmodcmd" || $doit $chmodcmd "$dst"; }
-
-else
-  # If we're going to rename the final executable, determine the name now.
-  if test -z "$transformarg"; then
-    dstfile=`basename "$dst"`
-  else
-    dstfile=`basename "$dst" $transformbasename \
-             | sed $transformarg`$transformbasename
-  fi
-
-  # don't allow the sed command to completely eliminate the filename.
-  test -z "$dstfile" && dstfile=`basename "$dst"`
-
-  # Make a couple of temp file names in the proper directory.
-  dsttmp=$dstdir/_inst.$$_
-  rmtmp=$dstdir/_rm.$$_
-
-  # Trap to clean up those temp files at exit.
-  trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-  trap '(exit $?); exit' 1 2 13 15
-
-  # Move or copy the file name to the temp name
-  $doit $instcmd "$src" "$dsttmp" &&
-
-  # and set any options; do chmod last to preserve setuid bits.
-  #
-  # If any of these fail, we abort the whole thing.  If we want to
-  # ignore errors from any of these, just make sure not to ignore
-  # errors from the above "$doit $instcmd $src $dsttmp" command.
-  #
-  { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } \
-    && { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } \
-    && { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } \
-    && { test -z "$chmodcmd" || $doit $chmodcmd "$dsttmp"; } &&
-
-  # Now remove or move aside any old file at destination location.  We
-  # try this two ways since rm can't unlink itself on some systems and
-  # the destination file might be busy for other reasons.  In this case,
-  # the final cleanup might fail but the new file should still install
-  # successfully.
-  {
-    if test -f "$dstdir/$dstfile"; then
-      $doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null \
-      || $doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null \
-      || {
-	  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-	  (exit 1); exit
-      }
-    else
-      :
-    fi
-  } &&
-
-  # Now rename the file to the real destination.
-  $doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-fi &&
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-{
-  (exit 0); exit
-}
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:

check_mssql_health/src/check_mssql_health-1.5.8.2/missing

@@ -1,360 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-
-scriptversion=2003-09-02.23
-
-# Copyright (C) 1996, 1997, 1999, 2000, 2002, 2003 
-#   Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-msg="missing on your system"
-
-case "$1" in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  # Exit code 63 means version mismatch.  This often happens
-  # when the user try to use an ancient version of a tool on
-  # a file that requires a minimum version.  In this case we
-  # we should proceed has if the program had been absent, or
-  # if --run hadn't been passed.
-  if test $? = 63; then
-    run=:
-    msg="probably too old"
-  fi
-  ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]
-
-Send bug reports to <bug-automake@gnu.org>."
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing $scriptversion (GNU Automake)"
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-  aclocal*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is needed, but is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' $msg.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is $msg.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  tar)
-    shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case "$firstarg" in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case "$firstarg" in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and is $msg.
-         You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequisites for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0
-
-# Local variables:
-# eval: (add-hook 'write-file-hooks 'time-stamp)
-# time-stamp-start: "scriptversion="
-# time-stamp-format: "%:y-%02m-%02d.%02H"
-# time-stamp-end: "$"
-# End:

check_mssql_health/src/check_mssql_health-1.5.8.2/plugins-scripts/Makefile.am

@@ -1,51 +0,0 @@
-## Process this file with automake to produce Makefile.in
-
-SUFFIXES = .pl .pm .sh
-
-VPATH=$(top_srcdir) $(top_srcdir)/plugins-scripts $(top_srcdir)/plugins-scripts/t
-
-libexec_SCRIPTS=check_mssql_health
-MY_MODULES=
-EXTRA_MODULES=\
-  Nagios/DBD/MSSQL/Server/Memorypool.pm \
-  Nagios/DBD/MSSQL/Server/Database/Datafile.pm \
-  Nagios/DBD/MSSQL/Server/Database.pm \
-  Nagios/DBD/MSSQL/Server.pm \
-  Nagios/Extraopts.pm
-EXTRA_DIST=check_mssql_health.pl $(EXTRA_MODULES)
-
-CLEANFILES=$(libexec_SCRIPTS)
-
-AM_INSTALL_PROGRAM_FLAGS=@INSTALL_OPTS@
-
-.pm :
-	$(AWK) -f ./subst $< > $@
-	chmod +x $@
-
-.pl :
-	$(AWK) -f ./subst $< > $@
-	chmod +x $@
-
-.sh :
-	$(AWK) -f ./subst $< > $@
-	chmod +x $@
-
-$(libexec_SCRIPTS) : $(EXTRA_DIST)
-	$(ECHO) "#! #PERL# -w" | $(AWK) -f ./subst > $@
-#since 1.5.1	$(ECHO) "# nagios: -epn" >> $@
-	$(ECHO) >> $@
-	$(ECHO) "my %ERRORS=( OK => 0, WARNING => 1, CRITICAL => 2, UNKNOWN => 3 );" >> $@
-	$(ECHO) "my %ERRORCODES=( 0 => 'OK', 1 => 'WARNING', 2 => 'CRITICAL', 3 => 'UNKNOWN' );" >> $@
-	for m in ${EXTRA_MODULES}; do \
-		$(SED) -e 's/^1;//g' < $$m | $(AWK) -f ./subst | $(GREP) -v "my %ERROR" >> $@; \
-	done
-	if [ -d "${MYMODULES_DIR}" ]; then \
-		for m in ${MYMODULES_DIR}/CheckMSSQLHealthExt*.pm; do \
-			if [ -f $$m ]; then \
-				$(ECHO) found $$m; \
-				$(SED) -e 's/^1;//g' < $$m | $(AWK) -f ./subst | $(GREP) -v "my %ERROR" >> $@; \
-			fi \
-		done \
-	fi
-	$(CAT) check_mssql_health.pl | $(GREP) -v "^use Nagios" | $(GREP) -v "^my %ERROR" | $(AWK) -f ./subst >> $@
-	chmod +x $@

check_mssql_health/src/check_mssql_health-1.5.8.2/plugins-scripts/Makefile.in

@@ -1,358 +0,0 @@
-# Makefile.in generated by automake 1.9.6 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-top_builddir = ..
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-subdir = plugins-scripts
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(srcdir)/subst.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_CLEAN_FILES = subst
-am__installdirs = "$(DESTDIR)$(libexecdir)"
-libexecSCRIPT_INSTALL = $(INSTALL_SCRIPT)
-SCRIPTS = $(libexec_SCRIPTS)
-SOURCES =
-DIST_SOURCES =
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-VPATH = $(top_srcdir) $(top_srcdir)/plugins-scripts $(top_srcdir)/plugins-scripts/t
-INSTALL = @INSTALL@
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CAT = @CAT@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-GREP = @GREP@
-GZIP = @GZIP@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_OPTS = @INSTALL_OPTS@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MYMODULES_DIR = @MYMODULES_DIR@
-MYMODULES_DYN_DIR = @MYMODULES_DYN_DIR@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PERL = @PERL@
-RELEASE = @RELEASE@
-SED = @SED@
-SET_MAKE = @SET_MAKE@
-SH = @SH@
-SHELL = @SHELL@
-STATEFILES_DIR = @STATEFILES_DIR@
-STRIP = @STRIP@
-SUPPORT = @SUPPORT@
-VERSION = @VERSION@
-WARRANTY = @WARRANTY@
-ac_ct_STRIP = @ac_ct_STRIP@
-am__leading_dot = @am__leading_dot@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-datadir = @datadir@
-exec_prefix = @exec_prefix@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-with_nagios_group = @with_nagios_group@
-with_nagios_user = @with_nagios_user@
-SUFFIXES = .pl .pm .sh
-libexec_SCRIPTS = check_mssql_health
-MY_MODULES = 
-EXTRA_MODULES = \
-  Nagios/DBD/MSSQL/Server/Memorypool.pm \
-  Nagios/DBD/MSSQL/Server/Database/Datafile.pm \
-  Nagios/DBD/MSSQL/Server/Database.pm \
-  Nagios/DBD/MSSQL/Server.pm \
-  Nagios/Extraopts.pm
-
-EXTRA_DIST = check_mssql_health.pl $(EXTRA_MODULES)
-CLEANFILES = $(libexec_SCRIPTS)
-AM_INSTALL_PROGRAM_FLAGS = @INSTALL_OPTS@
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .pl .pm .sh
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  plugins-scripts/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  plugins-scripts/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-subst: $(top_builddir)/config.status $(srcdir)/subst.in
-	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
-install-libexecSCRIPTS: $(libexec_SCRIPTS)
-	@$(NORMAL_INSTALL)
-	test -z "$(libexecdir)" || $(mkdir_p) "$(DESTDIR)$(libexecdir)"
-	@list='$(libexec_SCRIPTS)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  if test -f $$d$$p; then \
-	    f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-	    echo " $(libexecSCRIPT_INSTALL) '$$d$$p' '$(DESTDIR)$(libexecdir)/$$f'"; \
-	    $(libexecSCRIPT_INSTALL) "$$d$$p" "$(DESTDIR)$(libexecdir)/$$f"; \
-	  else :; fi; \
-	done
-
-uninstall-libexecSCRIPTS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(libexec_SCRIPTS)'; for p in $$list; do \
-	  f=`echo "$$p" | sed 's|^.*/||;$(transform)'`; \
-	  echo " rm -f '$(DESTDIR)$(libexecdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(libexecdir)/$$f"; \
-	done
-uninstall-info-am:
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
-	$(mkdir_p) $(distdir)/Nagios $(distdir)/Nagios/DBD/MSSQL $(distdir)/Nagios/DBD/MSSQL/Server $(distdir)/Nagios/DBD/MSSQL/Server/Database
-	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
-	list='$(DISTFILES)'; for file in $$list; do \
-	  case $$file in \
-	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
-	    $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
-	  esac; \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
-	  if test "$$dir" != "$$file" && test "$$dir" != "."; then \
-	    dir="/$$dir"; \
-	    $(mkdir_p) "$(distdir)$$dir"; \
-	  else \
-	    dir=''; \
-	  fi; \
-	  if test -d $$d/$$file; then \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(SCRIPTS)
-installdirs:
-	for dir in "$(DESTDIR)$(libexecdir)"; do \
-	  test -z "$$dir" || $(mkdir_p) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-exec-am: install-libexecSCRIPTS
-
-install-info: install-info-am
-
-install-man:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-info-am uninstall-libexecSCRIPTS
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
-	distclean-generic distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-exec \
-	install-exec-am install-info install-info-am \
-	install-libexecSCRIPTS install-man install-strip installcheck \
-	installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am uninstall uninstall-am uninstall-info-am \
-	uninstall-libexecSCRIPTS
-
-
-.pm :
-	$(AWK) -f ./subst $< > $@
-	chmod +x $@
-
-.pl :
-	$(AWK) -f ./subst $< > $@
-	chmod +x $@
-
-.sh :
-	$(AWK) -f ./subst $< > $@
-	chmod +x $@
-
-$(libexec_SCRIPTS) : $(EXTRA_DIST)
-	$(ECHO) "#! #PERL# -w" | $(AWK) -f ./subst > $@
-#since 1.5.1	$(ECHO) "# nagios: -epn" >> $@
-	$(ECHO) >> $@
-	$(ECHO) "my %ERRORS=( OK => 0, WARNING => 1, CRITICAL => 2, UNKNOWN => 3 );" >> $@
-	$(ECHO) "my %ERRORCODES=( 0 => 'OK', 1 => 'WARNING', 2 => 'CRITICAL', 3 => 'UNKNOWN' );" >> $@
-	for m in ${EXTRA_MODULES}; do \
-		$(SED) -e 's/^1;//g' < $$m | $(AWK) -f ./subst | $(GREP) -v "my %ERROR" >> $@; \
-	done
-	if [ -d "${MYMODULES_DIR}" ]; then \
-		for m in ${MYMODULES_DIR}/CheckMSSQLHealthExt*.pm; do \
-			if [ -f $$m ]; then \
-				$(ECHO) found $$m; \
-				$(SED) -e 's/^1;//g' < $$m | $(AWK) -f ./subst | $(GREP) -v "my %ERROR" >> $@; \
-			fi \
-		done \
-	fi
-	$(CAT) check_mssql_health.pl | $(GREP) -v "^use Nagios" | $(GREP) -v "^my %ERROR" | $(AWK) -f ./subst >> $@
-	chmod +x $@
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

check_mssql_health/src/check_mssql_health-1.5.8.2/plugins-scripts/Nagios/DBD/MSSQL/Server/Database.pm

@@ -1,471 +0,0 @@
-package DBD::MSSQL::Server::Database;
-
-use strict;
-
-our @ISA = qw(DBD::MSSQL::Server);
-
-my %ERRORS=( OK => 0, WARNING => 1, CRITICAL => 2, UNKNOWN => 3 );
-my %ERRORCODES=( 0 => 'OK', 1 => 'WARNING', 2 => 'CRITICAL', 3 => 'UNKNOWN' );
-
-{
-  my @databases = ();
-  my $initerrors = undef;
-
-  sub add_database {
-    push(@databases, shift);
-  }
-
-  sub return_databases {
-    return reverse
-        sort { $a->{name} cmp $b->{name} } @databases;
-  }
-
-  sub init_databases {
-    my %params = @_;
-    my $num_databases = 0;
-    if (($params{mode} =~ /server::database::listdatabases/) ||
-        ($params{mode} =~ /server::database::databasefree/) ||
-        ($params{mode} =~ /server::database::lastbackup/) ||
-        ($params{mode} =~ /server::database::transactions/) ||
-        ($params{mode} =~ /server::database::datafile/)) {
-      my @databaseresult = ();
-      if (DBD::MSSQL::Server::return_first_server()->version_is_minimum("9.x")) {
-        @databaseresult = $params{handle}->fetchall_array(q{
-          SELECT name, database_id FROM master.sys.databases
-        });
-      } else {
-        #@databaseresult = map {
-        #  [ $_->[0], $_->[3] ] # only name, dbid
-        #} $params{handle}->fetchall_array(q{exec sp_helpdb});
-        @databaseresult = $params{handle}->fetchall_array(q{
-          SELECT name, dbid FROM master.dbo.sysdatabases
-        });
-      }
-      if ($params{mode} =~ /server::database::transactions/) {
-        push(@databaseresult, [ '_Total', 0 ]);
-      }
-      foreach (@databaseresult) {
-        my ($name, $id) = @{$_};
-        next if $params{database} && $name ne $params{database};
-        if ($params{regexp}) {
-          next if $params{selectname} && $name !~ /$params{selectname}/;
-        } else {
-          next if $params{selectname} && lc $params{selectname} ne lc $name;
-        }
-        my %thisparams = %params;
-        $thisparams{name} = $name;
-        $thisparams{id} = $id;
-        my $database = DBD::MSSQL::Server::Database->new(
-            %thisparams);
-        add_database($database);
-        $num_databases++;
-      }
-      if (! $num_databases) {
-        $initerrors = 1;
-        return undef;
-      }
-    } elsif ($params{mode} =~ /server::database::backupage/) {
-      my @databaseresult = ();
-      if (DBD::MSSQL::Server::return_first_server()->version_is_minimum("9.x")) {
-        @databaseresult = $params{handle}->fetchall_array(q{
-          SELECT
-            a.name, 
-            DATEDIFF(HH, MAX(b.backup_finish_date), GETDATE()),
-            DATEDIFF(MI, MAX(b.backup_start_date), MAX(b.backup_finish_date))
-          FROM sys.sysdatabases a LEFT OUTER JOIN msdb.dbo.backupset b
-          ON b.database_name = a.name
-          GROUP BY a.name 
-          ORDER BY a.name
-        });
-      } else {
-        @databaseresult = $params{handle}->fetchall_array(q{
-          SELECT
-            a.name, 
-            DATEDIFF(HH, MAX(b.backup_finish_date), GETDATE()),
-            DATEDIFF(MI, MAX(b.backup_start_date), MAX(b.backup_finish_date))
-          FROM master.dbo.sysdatabases a LEFT OUTER JOIN msdb.dbo.backupset b
-          ON b.database_name = a.name
-          GROUP BY a.name 
-          ORDER BY a.name 
-        }); 
-      }
-      foreach (sort {
-        if (! defined $b->[1]) {
-          return 1;
-        } elsif (! defined $a->[1]) {
-          return -1;
-        } else {
-          return $a->[1] <=> $b->[1];
-        }
-      } @databaseresult) { 
-        my ($name, $age, $duration) = @{$_};
-        next if $params{database} && $name ne $params{database};
-        if ($params{regexp}) { 
-          next if $params{selectname} && $name !~ /$params{selectname}/;
-        } else {
-          next if $params{selectname} && lc $params{selectname} ne lc $name;
-        }
-        my %thisparams = %params;
-        $thisparams{name} = $name;
-        $thisparams{backup_age} = $age;
-        $thisparams{backup_duration} = $duration;
-        my $database = DBD::MSSQL::Server::Database->new(
-            %thisparams);
-        add_database($database);
-        $num_databases++;
-      }
-    }
-
-  }
-
-}
-
-sub new {
-  my $class = shift;
-  my %params = @_;
-  my $self = {
-    handle => $params{handle},
-    warningrange => $params{warningrange},
-    criticalrange => $params{criticalrange},
-    name => $params{name},
-    id => $params{id},
-    datafiles => [],
-    backup_age => $params{backup_age},
-    backup_duration => $params{backup_duration},
-  };
-  bless $self, $class;
-  $self->init(%params);
-  return $self;
-}
-
-sub init {
-  my $self = shift;
-  my %params = @_;
-  $self->init_nagios();
-  $self->set_local_db_thresholds(%params);
-  if ($params{mode} =~ /server::database::datafile/) {
-    $params{database} = $self->{name};
-    DBD::MSSQL::Server::Database::Datafile::init_datafiles(%params);
-    if (my @datafiles = 
-        DBD::MSSQL::Server::Database::Datafile::return_datafiles()) {
-      $self->{datafiles} = \@datafiles;
-    } else {
-      $self->add_nagios_critical("unable to aquire datafile info");
-    }
-  } elsif ($params{mode} =~ /server::database::databasefree/) {
-    ###################################################################################
-    #                            fuer's museum
-    # 1> sp_spaceused
-    # 2> go
-    # database_name   database_size   unallocated space
-    # master  4.50 MB 1.32 MB
-    # reserved        data    index_size      unused
-    # 2744 KB 1056 KB 1064 KB 624 KB
-    # (return status = 0)
-    #my($database_name, $database_size, $unallocated_space,
-    #    $reserved, $data, $index_size, $unused) =
-    #     $params{handle}->fetchrow_array(
-    #    "USE ".$self->{name}."\nEXEC SP_SPACEUSED"
-    #);
-    # server mgmt studio           sp_spaceused
-    # Currently Allocated Space    database_size       641.94MB
-    # Available Free Space         unallocated space   457.09MB 
-    #$database_size =~ s/MB//g;
-    #$unallocated_space =~ s/MB//g;
-    #$self->{size} = $database_size * 1024 * 1024;
-    #$self->{free} = $unallocated_space * 1024 * 1024;
-    #$self->{percent_free} = $unallocated_space / $database_size * 100;
-    #$self->{used} = $self->{size} - $self->{free};
-    #$self->{maxsize} = "99999999999999999";
-    ###################################################################################
-    my $calc = {};
-    if ($params{method} eq 'sqlcmd' || $params{method} eq 'sqsh') {
-      foreach($self->{handle}->fetchall_array(q{
-        if object_id('tempdb..#FreeSpace') is null
-          create table #FreeSpace(
-            Drive varchar(10),
-            MB_Free bigint
-          )
-        go
-        DELETE FROM tempdb..#FreeSpace
-        INSERT INTO tempdb..#FreeSpace exec master.dbo.xp_fixeddrives
-        go
-        SELECT * FROM tempdb..#FreeSpace
-      })) {
-        $calc->{drive_mb}->{lc $_->[0]} = $_->[1];
-      }
-    } else {
-      $self->{handle}->execute(q{
-        if object_id('tempdb..#FreeSpace') is null 
-          create table #FreeSpace(  
-            Drive varchar(10),  
-            MB_Free bigint  
-          ) 
-      });
-      $self->{handle}->execute(q{
-        DELETE FROM #FreeSpace
-      });
-      $self->{handle}->execute(q{
-        INSERT INTO #FreeSpace exec master.dbo.xp_fixeddrives
-      });
-      foreach($self->{handle}->fetchall_array(q{
-        SELECT * FROM #FreeSpace
-      })) {
-        $calc->{drive_mb}->{lc $_->[0]} = $_->[1];
-      }
-    }
-    #$self->{handle}->execute(q{
-    #  DROP TABLE #FreeSpace
-    #});
-    # Page = 8KB
-    # sysfiles ist sv2000, noch als kompatibilitaetsview vorhanden
-    # dbo.sysfiles kann 2008 durch sys.database_files ersetzt werden?
-    # omeiomeiomei in 2005 ist ein sys.sysindexes compatibility view
-    #   fuer 2000.dbo.sysindexes
-    #   besser ist sys.allocation_units
-    if (DBD::MSSQL::Server::return_first_server()->version_is_minimum("9.x")) {
-      my $sql = q{
-          SELECT 
-              SUM(CAST(used AS BIGINT)) / 128
-          FROM 
-              [?].sys.sysindexes
-          WHERE
-              indid IN (0,1,255)
-      };
-      #$sql =~ s/\[\?\]/$self->{name}/g;
-      $sql =~ s/\?/$self->{name}/g;
-      $self->{used_mb} = $self->{handle}->fetchrow_array($sql);
-    } else {
-      my $sql = q{
-          SELECT 
-              SUM(CAST(used AS BIGINT)) / 128
-          FROM 
-              [?].dbo.sysindexes
-          WHERE
-              indid IN (0,1,255)
-      };
-      #$sql =~ s/\[\?\]/$self->{name}/g;
-      $sql =~ s/\?/$self->{name}/g;
-      $self->{used_mb} = $self->{handle}->fetchrow_array($sql);
-    }
-    my @fileresult = ();
-    if (DBD::MSSQL::Server::return_first_server()->version_is_minimum("9.x")) {
-      my $sql = q{
-          SELECT
-              RTRIM(a.name), RTRIM(a.filename), CAST(a.size AS BIGINT),
-              CAST(a.maxsize AS BIGINT), a.growth
-          FROM
-              [?].sys.sysfiles a
-          JOIN
-              [?].sys.sysfilegroups b
-          ON
-              a.groupid = b.groupid
-      };
-      #$sql =~ s/\[\?\]/$self->{name}/g;
-      $sql =~ s/\?/$self->{name}/g;
-      @fileresult = $self->{handle}->fetchall_array($sql);
-    } else {
-      my $sql = q{
-          SELECT
-              RTRIM(a.name), RTRIM(a.filename), CAST(a.size AS BIGINT),
-              CAST(a.maxsize AS BIGINT), a.growth
-          FROM
-              [?].dbo.sysfiles a
-          JOIN
-              [?].dbo.sysfilegroups b
-          ON
-              a.groupid = b.groupid
-      };
-      #$sql =~ s/\[\?\]/$self->{name}/g;
-      $sql =~ s/\?/$self->{name}/g;
-      @fileresult = $self->{handle}->fetchall_array($sql);
-    }
-    foreach(@fileresult) {
-      my($name, $filename, $size, $maxsize, $growth) = @{$_};
-      my $drive = lc substr($filename, 0, 1);
-      $calc->{datafile}->{$name}->{allocsize} = $size / 128;
-      if ($growth == 0) {
-        $calc->{datafile}->{$name}->{maxsize} = $size / 128;
-      } else {
-        if ($maxsize == -1) {
-          $calc->{datafile}->{$name}->{maxsize} =
-              exists $calc->{drive_mb}->{$drive} ?
-                  ($calc->{datafile}->{$name}->{allocsize} + 
-                   $calc->{drive_mb}->{$drive}) : 4 * 1024;
-          # falls die platte nicht gefunden wurde, dann nimm halt 4GB
-          if (exists $calc->{drive_mb}->{$drive}) {
-            # davon kann ausgegangen werden. wenn die drives nicht zur
-            # vefuegung stehen, stimmt sowieso hinten und vorne nichts.
-            $calc->{drive_mb}->{$drive} = 0;
-            # damit ist der platz dieses laufwerks verbraten und in
-            # max_mb eingeflossen. es darf nicht sein, dass der freie platz
-            # mehrfach gezaehlt wird, wenn es mehrere datafiles auf diesem
-            # laufwerk gibt.
-          }
-        } else {
-          $calc->{datafile}->{$name}->{maxsize} = $maxsize / 128;
-        }
-      }
-      $self->{allocated_mb} += $calc->{datafile}->{$name}->{allocsize};
-      $self->{max_mb} += $calc->{datafile}->{$name}->{maxsize};
-    }
-    $self->{allocated_mb} = $self->{allocated_mb};
-    if ($self->{used_mb} > $self->{allocated_mb}) {
-      # obige used-berechnung liefert manchmal (wenns knapp hergeht) mehr als
-      # den maximal verfuegbaren platz. vermutlich muessen dann
-      # zwecks ermittlung des tatsaechlichen platzverbrauchs 
-      # irgendwelche dbcc updateusage laufen.
-      # egal, wird schon irgendwie stimmen.
-      $self->{used_mb} = $self->{allocated_mb};
-      $self->{estimated} = 1;
-    } else {
-      $self->{estimated} = 0;
-    }
-    $self->{free_mb} = $self->{max_mb} - $self->{used_mb};
-    $self->{free_percent} = 100 * $self->{free_mb} / $self->{max_mb};
-    $self->{allocated_percent} = 100 * $self->{allocated_mb} / $self->{max_mb};
-  } elsif ($params{mode} =~ /^server::database::transactions/) {
-    $self->{transactions_s} = $self->{handle}->get_perf_counter_instance(
-        'SQLServer:Databases', 'Transactions/sec', $self->{name});
-    if (! defined $self->{transactions_s}) {
-      $self->add_nagios_unknown("unable to aquire counter data");
-    } else {
-      $self->valdiff(\%params, qw(transactions_s));
-      $self->{transactions_per_sec} = $self->{delta_transactions_s} / $self->{delta_timestamp};
-    }
-  }
-}
-
-sub nagios {
-  my $self = shift;
-  my %params = @_;
-  if (! $self->{nagios_level}) {
-    if ($params{mode} =~ /server::database::datafile::listdatafiles/) {
-      foreach (sort { $a->{logicalfilename} cmp $b->{logicalfilename}; }  @{$self->{datafiles}}) {
-	printf "%s\n", $_->{logicalfilename};
-      }
-      $self->add_nagios_ok("have fun");
-    } elsif ($params{mode} =~ /^server::database::transactions/) {
-      $self->add_nagios(
-          $self->check_thresholds($self->{transactions_per_sec}, 10000, 50000),
-          sprintf "%s has %.4f transactions / sec",
-          $self->{name}, $self->{transactions_per_sec});
-      $self->add_perfdata(sprintf "%s_transactions_per_sec=%.4f;%s;%s",
-          $self->{name}, $self->{transactions_per_sec},
-          $self->{warningrange}, $self->{criticalrange});
-    } elsif ($params{mode} =~ /server::database::databasefree/) {
-      # ->percent_free
-      # ->free
-      #
-      # ausgabe
-      #   perfdata db_<db>_free_pct
-      #   perfdata db_<db>_free        (real_bytes_max - bytes) + bytes_free  (with units)
-      #   perfdata db_<db>_alloc_free  bytes_free (with units)
-      #
-              # umrechnen der thresholds
-      # ()/%
-      # MB
-      # GB
-      # KB
-      if (($self->{warningrange} && $self->{warningrange} !~ /^\d+[\.\d]*:/) ||
-          ($self->{criticalrange} && $self->{criticalrange} !~ /^\d+[\.\d]*:/)) {
-        $self->add_nagios_unknown("you want an alert if free space is _above_ a threshold????");
-        return;
-      }
-      if (! $params{units}) {
-        $params{units} = "%";
-      }
-      $self->{warning_bytes} = 0;
-      $self->{critical_bytes} = 0;
-      if ($params{units} eq "%") {
-        $self->add_nagios(
-            $self->check_thresholds($self->{free_percent}, "5:", "2:"),
-                sprintf("database %s has %.2f%% free space left",
-                $self->{name}, $self->{free_percent},
-                ($self->{estimated} ? " (estim.)" : ""))
-        );
-        $self->{warningrange} =~ s/://g;
-        $self->{criticalrange} =~ s/://g;
-        $self->add_perfdata(sprintf "\'db_%s_free_pct\'=%.2f%%;%d:;%d:",
-            lc $self->{name},
-            $self->{free_percent},
-            $self->{warningrange}, $self->{criticalrange});
-        $self->add_perfdata(sprintf "\'db_%s_free\'=%dMB;%.2f:;%.2f:;0;%.2f",
-            lc $self->{name},
-            $self->{free_mb},
-            $self->{warningrange} * $self->{max_mb} / 100,
-            $self->{criticalrange} * $self->{max_mb} / 100,
-            $self->{max_mb});
-        $self->add_perfdata(sprintf "\'db_%s_allocated_pct\'=%.2f%%",
-            lc $self->{name},
-            $self->{allocated_percent});
-      } else {
-        my $factor = 1; # default MB
-        if ($params{units} eq "GB") {
-          $factor = 1024;
-        } elsif ($params{units} eq "MB") {
-          $factor = 1;
-        } elsif ($params{units} eq "KB") {
-          $factor = 1 / 1024;
-        }
-        $self->{warningrange} ||= "5:";
-        $self->{criticalrange} ||= "2:";
-        my $saved_warningrange = $self->{warningrange};
-        my $saved_criticalrange = $self->{criticalrange};
-        # : entfernen weil gerechnet werden muss
-        $self->{warningrange} =~ s/://g;
-        $self->{criticalrange} =~ s/://g;
-        $self->{warningrange} = $self->{warningrange} ?
-            $self->{warningrange} * $factor : 5 * $factor;
-        $self->{criticalrange} = $self->{criticalrange} ?
-            $self->{criticalrange} * $factor : 2 * $factor;
-        $self->{percent_warning} = 100 * $self->{warningrange} / $self->{max_mb};
-        $self->{percent_critical} = 100 * $self->{criticalrange} / $self->{max_mb};
-        $self->{warningrange} .= ':';
-        $self->{criticalrange} .= ':';
-        $self->add_nagios(
-            $self->check_thresholds($self->{free_mb}, "5242880:", "1048576:"),
-                sprintf("database %s has %.2f%s free space left", $self->{name},
-                    $self->{free_mb} / $factor, $params{units})
-        );
-        $self->{warningrange} = $saved_warningrange;
-        $self->{criticalrange} = $saved_criticalrange;
-        $self->{warningrange} =~ s/://g;
-        $self->{criticalrange} =~ s/://g;
-        $self->add_perfdata(sprintf "\'db_%s_free_pct\'=%.2f%%;%.2f:;%.2f:",
-            lc $self->{name},
-            $self->{free_percent}, $self->{percent_warning},
-            $self->{percent_critical});
-        $self->add_perfdata(sprintf "\'db_%s_free\'=%.2f%s;%.2f:;%.2f:;0;%.2f",
-            lc $self->{name},
-            $self->{free_mb} / $factor, $params{units},
-            $self->{warningrange},
-            $self->{criticalrange},
-            $self->{max_mb} / $factor);
-        $self->add_perfdata(sprintf "\'db_%s_allocated_pct\'=%.2f%%",
-            lc $self->{name},
-            $self->{allocated_percent});
-      }
-    } elsif ($params{mode} =~ /server::database::backupage/) {
-      if (! defined $self->{backup_age}) { 
-        $self->add_nagios_critical(sprintf "%s was never backupped",
-            $self->{name}); 
-        $self->{backup_age} = 0;
-        $self->{backup_duration} = 0;
-        $self->check_thresholds($self->{backup_age}, 48, 72); # init wg perfdata
-      } else { 
-        $self->add_nagios( 
-            $self->check_thresholds($self->{backup_age}, 48, 72), 
-            sprintf "%s backupped %dh ago", $self->{name}, $self->{backup_age});
-      } 
-      $self->add_perfdata(sprintf "'%s_bck_age'=%d;%s;%s", 
-          $self->{name}, $self->{backup_age}, 
-          $self->{warningrange}, $self->{criticalrange}); 
-      $self->add_perfdata(sprintf "'%s_bck_time'=%d", 
-          $self->{name}, $self->{backup_duration}); 
-    } 
-  }
-}
-
-
-1;

check_mssql_health/src/check_mssql_health-1.5.8.2/plugins-scripts/Nagios/DBD/MSSQL/Server/Database/Datafile.pm

@@ -1,202 +0,0 @@
-package DBD::MSSQL::Server::Database::Datafile;
-
-use strict;
-use File::Basename;
-
-our @ISA = qw(DBD::MSSQL::Server::Database);
-
-my %ERRORS=( OK => 0, WARNING => 1, CRITICAL => 2, UNKNOWN => 3 );
-my %ERRORCODES=( 0 => 'OK', 1 => 'WARNING', 2 => 'CRITICAL', 3 => 'UNKNOWN' );
-
-{
-  my @datafiles = ();
-  my $initerrors = undef;
-
-  sub add_datafile {
-    push(@datafiles, shift);
-  }
-
-  sub return_datafiles {
-    return reverse
-        sort { $a->{logicalfilename} cmp $b->{logicalfilename} } @datafiles;
-  }
-
-  sub clear_datafiles {
-    @datafiles = ();
-  }
-
-  sub init_datafiles {
-    my %params = @_;
-    my $num_datafiles = 0;
-    if ($params{mode} =~ /server::database::datafile::listdatafiles/) {
-      my @datafileresults = $params{handle}->fetchall_array(q{
-DECLARE @DBInfo TABLE
-( ServerName VARCHAR(100),
-DatabaseName VARCHAR(100),
-FileSizeMB INT,
-LogicalFileName sysname,
-PhysicalFileName NVARCHAR(520),
-Status sysname,
-Updateability sysname,
-RecoveryMode sysname,
-FreeSpaceMB INT,
-FreeSpacePct VARCHAR(7),
-FreeSpacePages INT,
-PollDate datetime)
-
-DECLARE @command VARCHAR(5000)
-
-SELECT @command = 'Use [' + '?' + '] SELECT
-@@servername as ServerName,
-' + '''' + '?' + '''' + ' AS DatabaseName,
-CAST(sysfiles.size/128.0 AS int) AS FileSize,
-sysfiles.name AS LogicalFileName, sysfiles.filename AS PhysicalFileName,
-CONVERT(sysname,DatabasePropertyEx(''?'',''Status'')) AS Status,
-CONVERT(sysname,DatabasePropertyEx(''?'',''Updateability'')) AS Updateability,
-CONVERT(sysname,DatabasePropertyEx(''?'',''Recovery'')) AS RecoveryMode,
-CAST(sysfiles.size/128.0 - CAST(FILEPROPERTY(sysfiles.name, ' + '''' +
-       'SpaceUsed' + '''' + ' ) AS int)/128.0 AS int) AS FreeSpaceMB,
-CAST(100 * (CAST (((sysfiles.size/128.0 -CAST(FILEPROPERTY(sysfiles.name,
-' + '''' + 'SpaceUsed' + '''' + ' ) AS int)/128.0)/(sysfiles.size/128.0))
-AS decimal(4,2))) AS varchar(8)) + ' + '''' + '%' + '''' + ' AS FreeSpacePct,
-GETDATE() as PollDate FROM dbo.sysfiles'
-INSERT INTO @DBInfo
-   (ServerName,
-   DatabaseName,
-   FileSizeMB,
-   LogicalFileName,
-   PhysicalFileName,
-   Status,
-   Updateability,
-   RecoveryMode,
-   FreeSpaceMB,
-   FreeSpacePct,
-   PollDate)
-EXEC sp_MSForEachDB @command
-
-SELECT
-   ServerName,
-   DatabaseName,
-   FileSizeMB,
-   LogicalFileName,
-   PhysicalFileName,
-   Status,
-   Updateability,
-   RecoveryMode,
-   FreeSpaceMB,
-   FreeSpacePct,
-   PollDate
-FROM @DBInfo
-ORDER BY
-   ServerName,
-   DatabaseName
-      });
-      if (DBD::MSSQL::Server::return_first_server()->windows_server()) {
-        fileparse_set_fstype("MSWin32");
-      }
-      foreach (@datafileresults) {
-        my ($servername, $databasename, $filesizemb, $logicalfilename,
-            $physicalfilename, $status, $updateability, $recoverymode,
-            $freespacemb, $freespacepct, $polldate) = @{$_};
-        next if $databasename ne $params{database};
-        if ($params{regexp}) {
-          #next if $params{selectname} &&
-          #    (($name !~ /$params{selectname}/) &&
-          #    (basename($name) !~ /$params{selectname}/));
-          next if $params{selectname} &&
-              ($logicalfilename !~ /$params{selectname}/);
-        } else {
-          #next if $params{selectname} &&
-          #    ((lc $params{selectname} ne lc $name) &&
-          #    (lc $params{selectname} ne lc basename($name)));
-          next if $params{selectname} &&
-              (lc $params{selectname} ne lc $logicalfilename);
-        }
-        my %thisparams = %params;
-        $thisparams{servername} = $servername;
-        $thisparams{databasename} = $databasename;
-        $thisparams{filesizemb} = $filesizemb;
-        $thisparams{logicalfilename} = $logicalfilename;
-        $thisparams{servername} = $servername;
-        $thisparams{status} = $status;
-        $thisparams{updateability} = $updateability;
-        $thisparams{recoverymode} = $recoverymode;
-        $thisparams{freespacemb} = $freespacemb;
-        $thisparams{freespacepct} = $freespacepct;
-        $thisparams{polldate} = $polldate;
-        my $datafile = 
-            DBD::MSSQL::Server::Database::Datafile->new(
-            %thisparams);
-        add_datafile($datafile);
-        $num_datafiles++;
-      }
-    }
-  }
-
-}
-
-sub new {
-  my $class = shift;
-  my %params = @_;
-  my $self = {
-    handle => $params{handle},
-    databasename => $params{databasename},
-    filesizemb => $params{filesizemb},
-    logicalfilename => $params{logicalfilename},
-    physicalfilename => $params{physicalfilename},
-    status => $params{status},
-    updateability => $params{updateability},
-    recoverymode => $params{recoverymode},
-    freespacemb => $params{freespacemb},
-    freespacepct => $params{freespacepct},
-    freespacepages => $params{freespacepages},
-    polldate => $params{polldate},
-    warningrange => $params{warningrange},
-    criticalrange => $params{criticalrange},
-  };
-  bless $self, $class;
-  $self->init(%params);
-  return $self;
-}
-
-sub init { 
-  my $self = shift;
-  my %params = @_;
-  $self->init_nagios();
-  if ($params{mode} =~ /server::database::iobalance/) {
-    if (! defined $self->{phyrds}) {
-      $self->add_nagios_critical(sprintf "unable to read datafile io %s", $@);
-    } else {
-      $params{differenciator} = $self->{path};
-      $self->valdiff(\%params, qw(phyrds phywrts));
-      $self->{io_total} = $self->{delta_phyrds} + $self->{delta_phywrts};
-    }
-  } elsif ($params{mode} =~ /server::database::datafile::iotraffic/) {
-    if (! defined $self->{phyrds}) {
-      $self->add_nagios_critical(sprintf "unable to read datafile io %s", $@);
-    } else {
-      $params{differenciator} = $self->{path};
-      $self->valdiff(\%params, qw(phyrds phywrts));
-      $self->{io_total_per_sec} = ($self->{delta_phyrds} + $self->{delta_phywrts}) /
-          $self->{delta_timestamp};
-    }
-  }
-}
-
-
-sub nagios {
-  my $self = shift;
-  my %params = @_;
-  if (! $self->{nagios_level}) {
-    if ($params{mode} =~ /server::database::datafile::iotraffic/) {
-      $self->add_nagios(
-          $self->check_thresholds($self->{io_total_per_sec}, "1000", "5000"),
-          sprintf ("%s: %.2f IO Operations per Second", 
-              $self->{name}, $self->{io_total_per_sec}));
-      $self->add_perfdata(sprintf "'dbf_%s_io_total_per_sec'=%.2f;%d;%d",
-          $self->{name}, $self->{io_total_per_sec},
-          $self->{warningrange}, $self->{criticalrange});
-    }
-  }
-}
-

check_mssql_health/src/check_mssql_health-1.5.8.2/plugins-scripts/Nagios/DBD/MSSQL/Server/Memorypool.pm

@@ -1,333 +0,0 @@
-package DBD::MSSQL::Server::Memorypool;
-
-use strict;
-
-our @ISA = qw(DBD::MSSQL::Server);
-
-my %ERRORS=( OK => 0, WARNING => 1, CRITICAL => 2, UNKNOWN => 3 );
-my %ERRORCODES=( 0 => 'OK', 1 => 'WARNING', 2 => 'CRITICAL', 3 => 'UNKNOWN' );
-
-sub new {
-  my $class = shift;
-  my %params = @_;
-  my $self = {
-    handle => $params{handle},
-    buffercache => undef,
-    procedurecache => undef,
-    locks => [],
-  };
-  bless $self, $class;
-  $self->init(%params);
-  return $self;
-}
-
-sub init {
-  my $self = shift;
-  my %params = @_;
-  $self->init_nagios();
-  if ($params{mode} =~ /server::memorypool::buffercache/) {
-    $self->{buffercache} = DBD::MSSQL::Server::Memorypool::BufferCache->new(
-        %params);
-  } elsif ($params{mode} =~ /server::memorypool::procedurecache/) {
-    $self->{procedurecache} = DBD::MSSQL::Server::Memorypool::ProcedureCache->new(
-        %params);
-  } elsif ($params{mode} =~ /server::memorypool::lock/) {
-    DBD::MSSQL::Server::Memorypool::Lock::init_locks(%params);
-    if (my @locks = DBD::MSSQL::Server::Memorypool::Lock::return_locks()) {
-      $self->{locks} = \@locks;
-    } else {
-      $self->add_nagios_critical("unable to aquire lock info");
-    }
-  }
-}
-
-sub nagios {
-  my $self = shift;
-  my %params = @_;
-  if ($params{mode} =~ /server::memorypool::buffercache/) {
-    $self->{buffercache}->nagios(%params);
-    $self->merge_nagios($self->{buffercache});
-  } elsif ($params{mode} =~ /^server::memorypool::lock::listlocks/) {
-    foreach (sort { $a->{name} cmp $b->{name}; }  @{$self->{locks}}) {
-      printf "%s\n", $_->{name};
-    }
-    $self->add_nagios_ok("have fun");
-  } elsif ($params{mode} =~ /^server::memorypool::lock/) {
-    foreach (@{$self->{locks}}) {
-      $_->nagios(%params);
-      $self->merge_nagios($_);
-    }
-  }
-}
-
-
-package DBD::MSSQL::Server::Memorypool::BufferCache;
-
-use strict;
-
-our @ISA = qw(DBD::MSSQL::Server::Memorypool);
-
-my %ERRORS=( OK => 0, WARNING => 1, CRITICAL => 2, UNKNOWN => 3 );
-my %ERRORCODES=( 0 => 'OK', 1 => 'WARNING', 2 => 'CRITICAL', 3 => 'UNKNOWN' );
-
-sub new {
-  my $class = shift;
-  my %params = @_;
-  my $self = {
-    handle => $params{handle},
-    hitratio => undef,
-    warningrange => $params{warningrange},
-    criticalrange => $params{criticalrange},
-  };
-  bless $self, $class;
-  $self->init(%params);
-  return $self;
-}
-
-sub init {
-  my $self = shift;
-  my %params = @_;
-  $self->init_nagios();
-  if ($params{mode} =~ /server::memorypool::buffercache::hitratio/) {
-    #        -- (a.cntr_value * 1.0 / b.cntr_value) * 100.0 [BufferCacheHitRatio]
-    $self->{cnt_hitratio} = $self->{handle}->get_perf_counter(
-        "SQLServer:Buffer Manager", "Buffer cache hit ratio");
-    $self->{cnt_hitratio_base} = $self->{handle}->get_perf_counter(
-        "SQLServer:Buffer Manager", "Buffer cache hit ratio base");
-    if (! defined $self->{cnt_hitratio}) {
-      $self->add_nagios_unknown("unable to aquire buffer cache data");
-    } else {
-      # das kracht weil teilweise negativ
-      #$self->valdiff(\%params, qw(cnt_hitratio cnt_hitratio_base));
-      $self->{hitratio} = ($self->{cnt_hitratio_base} == 0) ?
-          100 : $self->{cnt_hitratio} / $self->{cnt_hitratio_base} * 100.0;
-      # soll vorkommen.....
-      $self->{hitratio} = 100 if ($self->{hitratio} > 100);
-    }
-  } elsif ($params{mode} =~ /server::memorypool::buffercache::lazywrites/) {
-    $self->{lazy_writes_s} = $self->{handle}->get_perf_counter(
-        "SQLServer:Buffer Manager", "Lazy writes/sec");
-    if (! defined $self->{lazy_writes_s}) {
-      $self->add_nagios_unknown("unable to aquire buffer manager data");
-    } else {
-      $self->valdiff(\%params, qw(lazy_writes_s));
-      $self->{lazy_writes_per_sec} = $self->{delta_lazy_writes_s} / $self->{delta_timestamp};
-    }
-  } elsif ($params{mode} =~ /server::memorypool::buffercache::pagelifeexpectancy/) {
-    $self->{pagelifeexpectancy} = $self->{handle}->get_perf_counter(
-        "SQLServer:Buffer Manager", "Page life expectancy");
-    if (! defined $self->{pagelifeexpectancy}) {
-      $self->add_nagios_unknown("unable to aquire buffer manager data");
-    }
-  } elsif ($params{mode} =~ /server::memorypool::buffercache::freeliststalls/) {
-    $self->{freeliststalls_s} = $self->{handle}->get_perf_counter(
-        "SQLServer:Buffer Manager", "Free list stalls/sec");
-    if (! defined $self->{freeliststalls_s}) {
-      $self->add_nagios_unknown("unable to aquire buffer manager data");
-    } else {
-      $self->valdiff(\%params, qw(freeliststalls_s));
-      $self->{freeliststalls_per_sec} = $self->{delta_freeliststalls_s} / $self->{delta_timestamp};
-    }
-  } elsif ($params{mode} =~ /server::memorypool::buffercache::checkpointpages/) {
-    $self->{checkpointpages_s} = $self->{handle}->get_perf_counter(
-        "SQLServer:Buffer Manager", "Checkpoint pages/sec");
-    if (! defined $self->{checkpointpages_s}) {
-      $self->add_nagios_unknown("unable to aquire buffer manager data");
-    } else {
-      $self->valdiff(\%params, qw(checkpointpages_s));
-      $self->{checkpointpages_per_sec} = $self->{delta_checkpointpages_s} / $self->{delta_timestamp};
-    }
-  }
-}
-
-sub nagios {
-  my $self = shift;
-  my %params = @_;
-  if (! $self->{nagios_level}) {
-    if ($params{mode} =~ /server::memorypool::buffercache::hitratio/) {
-      $self->add_nagios(
-          $self->check_thresholds($self->{hitratio}, '90:', '80:'),
-          sprintf "buffer cache hit ratio is %.2f%%", $self->{hitratio});
-      $self->add_perfdata(sprintf "buffer_cache_hit_ratio=%.2f%%;%s;%s",
-          $self->{hitratio},
-          $self->{warningrange}, $self->{criticalrange});
-      #$self->add_perfdata(sprintf "buffer_cache_hit_ratio_now=%.2f%%",
-      #    $self->{hitratio_now});
-    } elsif ($params{mode} =~ /server::memorypool::buffercache::lazywrites/) {
-      $self->add_nagios(
-          $self->check_thresholds($self->{lazy_writes_per_sec}, '20', '40'),
-          sprintf "%.2f lazy writes per second", $self->{lazy_writes_per_sec});
-      $self->add_perfdata(sprintf "lazy_writes_per_sec=%.2f;%s;%s",
-          $self->{lazy_writes_per_sec},
-          $self->{warningrange}, $self->{criticalrange});
-    } elsif ($params{mode} =~ /server::memorypool::buffercache::pagelifeexpectancy/) {
-      $self->add_nagios(
-          $self->check_thresholds($self->{pagelifeexpectancy}, '300:', '180:'),
-          sprintf "page life expectancy is %d seconds", $self->{pagelifeexpectancy});
-      $self->add_perfdata(sprintf "page_life_expectancy=%d;%s;%s",
-          $self->{pagelifeexpectancy},
-          $self->{warningrange}, $self->{criticalrange});
-    } elsif ($params{mode} =~ /server::memorypool::buffercache::freeliststalls/) {
-      $self->add_nagios(
-          $self->check_thresholds($self->{freeliststalls_per_sec}, '4', '10'),
-          sprintf "%.2f free list stalls per second", $self->{freeliststalls_per_sec});
-      $self->add_perfdata(sprintf "free_list_stalls_per_sec=%.2f;%s;%s",
-          $self->{freeliststalls_per_sec},
-          $self->{warningrange}, $self->{criticalrange});
-    } elsif ($params{mode} =~ /server::memorypool::buffercache::checkpointpages/) {
-      $self->add_nagios(
-          $self->check_thresholds($self->{checkpointpages_per_sec}, '100', '500'),
-          sprintf "%.2f pages flushed per second", $self->{checkpointpages_per_sec});
-      $self->add_perfdata(sprintf "checkpoint_pages_per_sec=%.2f;%s;%s",
-          $self->{checkpointpages_per_sec},
-          $self->{warningrange}, $self->{criticalrange});
-    }
-  }
-}
-
-
-
-
-
-package DBD::MSSQL::Server::Memorypool::Lock;
-
-use strict;
-
-our @ISA = qw(DBD::MSSQL::Server::Memorypool);
-
-my %ERRORS=( OK => 0, WARNING => 1, CRITICAL => 2, UNKNOWN => 3 );
-my %ERRORCODES=( 0 => 'OK', 1 => 'WARNING', 2 => 'CRITICAL', 3 => 'UNKNOWN' );
-
-{
-  my @locks = ();
-  my $initerrors = undef;
-
-  sub add_lock {
-    push(@locks, shift);
-  }
-
-  sub return_locks {
-    return reverse
-        sort { $a->{name} cmp $b->{name} } @locks;
-  }
-
-  sub init_locks {
-    my %params = @_;
-    my $num_locks = 0;
-    if (($params{mode} =~ /server::memorypool::lock::listlocks/) ||
-        ($params{mode} =~ /server::memorypool::lock::waits/) ||
-        ($params{mode} =~ /server::memorypool::lock::deadlocks/) ||
-        ($params{mode} =~ /server::memorypool::lock::timeouts/)) {
-      my @lockresult = $params{handle}->get_instance_names(
-          'SQLServer:Locks');
-      foreach (@lockresult) {
-        my ($name) = @{$_};
-        $name =~ s/\s*$//;
-        if ($params{regexp}) {
-          next if $params{selectname} && $name !~ /$params{selectname}/;
-        } else {
-          next if $params{selectname} && lc $params{selectname} ne lc $name;
-        }
-        my %thisparams = %params;
-        $thisparams{name} = $name;
-        my $lock = DBD::MSSQL::Server::Memorypool::Lock->new(
-            %thisparams);
-        add_lock($lock);
-        $num_locks++;
-      }
-      if (! $num_locks) {
-        $initerrors = 1;
-        return undef;
-      }
-    }
-  }
-
-}
-
-sub new {
-  my $class = shift;
-  my %params = @_;
-  my $self = {
-    handle => $params{handle},
-    warningrange => $params{warningrange},
-    criticalrange => $params{criticalrange},
-    name => $params{name},
-  };
-  bless $self, $class;
-  $self->init(%params);
-  return $self;
-}
-
-sub init {
-  my $self = shift;
-  my %params = @_;
-  $self->init_nagios();
-  if ($params{mode} =~ /server::memorypool::lock::listlocks/) {
-    # name reicht
-  } elsif ($params{mode} =~ /server::memorypool::lock::waits/) {
-    $self->{lock_waits_s} = $self->{handle}->get_perf_counter_instance(
-        "SQLServer:Locks", "Lock Waits/sec", $self->{name});
-    if (! defined $self->{lock_waits_s}) {
-      $self->add_nagios_unknown("unable to aquire counter data");
-    } else {
-      $self->valdiff(\%params, qw(lock_waits_s));
-      $self->{lock_waits_per_sec} = $self->{delta_lock_waits_s} / $self->{delta_timestamp};
-    }
-  } elsif ($params{mode} =~ /^server::memorypool::lock::timeouts/) {
-    $self->{lock_timeouts_s} = $self->{handle}->get_perf_counter_instance(
-        "SQLServer:Locks", "Lock Timeouts/sec", $self->{name});
-    if (! defined $self->{lock_timeouts_s}) {
-      $self->add_nagios_unknown("unable to aquire counter data");
-    } else {
-      $self->valdiff(\%params, qw(lock_timeouts_s));
-      $self->{lock_timeouts_per_sec} = $self->{delta_lock_timeouts_s} / $self->{delta_timestamp};
-    }
-  } elsif ($params{mode} =~ /^server::memorypool::lock::deadlocks/) {
-    $self->{lock_deadlocks_s} = $self->{handle}->get_perf_counter_instance(
-        "SQLServer:Locks", "Number of Deadlocks/sec", $self->{name});
-    if (! defined $self->{lock_deadlocks_s}) {
-      $self->add_nagios_unknown("unable to aquire counter data");
-    } else {
-      $self->valdiff(\%params, qw(lock_deadlocks_s));
-      $self->{lock_deadlocks_per_sec} = $self->{delta_lock_deadlocks_s} / $self->{delta_timestamp};
-    }
-  }
-}
-
-sub nagios {
-  my $self = shift;
-  my %params = @_;
-  if (! $self->{nagios_level}) {
-    if ($params{mode} =~ /server::memorypool::lock::waits/) {
-      $self->add_nagios(
-          $self->check_thresholds($self->{lock_waits_per_sec}, 100, 500),
-          sprintf "%.4f lock waits / sec for %s",
-          $self->{lock_waits_per_sec}, $self->{name});
-      $self->add_perfdata(sprintf "%s_lock_waits_per_sec=%.4f;%s;%s",
-          $self->{name}, $self->{lock_waits_per_sec},
-          $self->{warningrange}, $self->{criticalrange});
-    } elsif ($params{mode} =~ /^server::memorypool::lock::timeouts/) {
-      $self->add_nagios(
-          $self->check_thresholds($self->{lock_timeouts_per_sec}, 1, 5),
-          sprintf "%.4f lock timeouts / sec for %s",
-          $self->{lock_timeouts_per_sec}, $self->{name});
-      $self->add_perfdata(sprintf "%s_lock_timeouts_per_sec=%.4f;%s;%s",
-          $self->{name}, $self->{lock_timeouts_per_sec},
-          $self->{warningrange}, $self->{criticalrange});
-    } elsif ($params{mode} =~ /^server::memorypool::lock::deadlocks/) {
-      $self->add_nagios(
-          $self->check_thresholds($self->{lock_deadlocks_per_sec}, 1, 5),
-          sprintf "%.4f deadlocks / sec for %s",
-          $self->{lock_deadlocks_per_sec}, $self->{name});
-      $self->add_perfdata(sprintf "%s_deadlocks_per_sec=%.4f;%s;%s",
-          $self->{name}, $self->{lock_deadlocks_per_sec},
-          $self->{warningrange}, $self->{criticalrange});
-    }
-  }
-}
-
-
-package DBD::MSSQL::Server::Memorypool::SystemLevelDataStructures::LockTable;
-package DBD::MSSQL::Server::Memorypool::ProcedureCache;
-package DBD::MSSQL::Server::Memorypool::LogCache;
-package DBD::MSSQL::Server::Memorypool::SystemLevelDataStructures;

check_mssql_health/src/check_mssql_health-1.5.8.2/plugins-scripts/Nagios/Extraopts.pm

@@ -1,103 +0,0 @@
-package Extraopts;
-
-use strict;
-use File::Basename;
-use Data::Dumper;
-
-sub new {
-  my $class = shift;
-  my %params = @_;
-  my $self = {
-    file => $params{file},
-    commandline => $params{commandline},
-    config => {},
-    section => 'default_no_section',
-  };
-  bless $self, $class;
-  $self->prepare_file_and_section();
-  $self->init();
-  return $self;
-}
-
-sub prepare_file_and_section {
-  my $self = shift;
-  if (! defined $self->{file}) {
-    # ./check_stuff --extra-opts
-    $self->{section} = basename($0);
-    $self->{file} = $self->get_default_file();
-  } elsif ($self->{file} =~ /^[^@]+$/) {
-    # ./check_stuff --extra-opts=special_opts
-    $self->{section} = $self->{file};
-    $self->{file} = $self->get_default_file();
-  } elsif ($self->{file} =~ /^@(.*)/) {
-    # ./check_stuff --extra-opts=@/etc/myconfig.ini
-    $self->{section} = basename($0);
-    $self->{file} = $1;
-  } elsif ($self->{file} =~ /^(.*?)@(.*)/) {
-    # ./check_stuff --extra-opts=special_opts@/etc/myconfig.ini
-    $self->{section} = $1;
-    $self->{file} = $2;
-  }
-}
-
-sub get_default_file {
-  my $self = shift;
-  foreach my $default (qw(/etc/nagios/plugins.ini
-      /usr/local/nagios/etc/plugins.ini
-      /usr/local/etc/nagios/plugins.ini
-      /etc/opt/nagios/plugins.ini
-      /etc/nagios-plugins.ini
-      /usr/local/etc/nagios-plugins.ini
-      /etc/opt/nagios-plugins.ini)) {
-    if (-f $default) {
-      return $default;
-    }
-  }
-  return undef;
-}
-
-sub init {
-  my $self = shift;
-  if (! defined $self->{file}) {
-    $self->{errors} = sprintf 'no extra-opts file specified and no default file found';
-  } elsif (! -f $self->{file}) {
-    $self->{errors} = sprintf 'could not open %s', $self->{file};
-  } else {
-    my $data = do { local (@ARGV, $/) = $self->{file}; <> };
-    my $in_section = 'default_no_section';
-    foreach my $line (split(/\n/, $data)) {
-      if ($line =~ /\[(.*)\]/) {
-        $in_section = $1;
-      } elsif ($line =~ /(.*)=(.*)/) {
-        $self->{config}->{$in_section}->{$1} = $2;
-      }
-    }
-  }
-}
-
-sub is_valid {
-  my $self = shift;
-  return ! exists $self->{errors};
-}
-
-sub overwrite {
-  my $self = shift;
-  my %commandline = ();
-  if (scalar(keys %{$self->{config}->{default_no_section}}) > 0) {
-    foreach (keys %{$self->{config}->{default_no_section}}) {
-      $commandline{$_} = $self->{config}->{default_no_section}->{$_};
-    }
-  }
-  if (exists $self->{config}->{$self->{section}}) {
-    foreach (keys %{$self->{config}->{$self->{section}}}) {
-      $commandline{$_} = $self->{config}->{$self->{section}}->{$_};
-    }
-  }
-  foreach (keys %commandline) {
-    if (! exists $self->{commandline}->{$_}) {
-      $self->{commandline}->{$_} = $commandline{$_};
-    }
-  }
-}
-
-

check_mssql_health/src/check_mssql_health-1.5.8.2/plugins-scripts/check_mssql_health.pl

@@ -1,551 +0,0 @@
-
-package main;
-
-use strict;
-use Getopt::Long qw(:config no_ignore_case);
-use File::Basename;
-use lib dirname($0);
-use Nagios::DBD::MSSQL::Server;
-use Nagios::DBD::MSSQL::Server::Instance;
-use Nagios::DBD::MSSQL::Server::Instance::SGA;
-use Nagios::DBD::MSSQL::Server::Instance::SGA::DataBuffer;
-use Nagios::DBD::MSSQL::Server::Instance::SGA::SharedPool;
-use Nagios::DBD::MSSQL::Server::Instance::SGA::SharedPool::LibraryCache;
-use Nagios::DBD::MSSQL::Server::Instance::SGA::SharedPool::DictionaryCache;
-use Nagios::DBD::MSSQL::Server::Instance::SGA::Latches;
-use Nagios::DBD::MSSQL::Server::Instance::PGA;
-use Nagios::DBD::MSSQL::Server::Instance::SGA::RedoLogBuffer;
-
-
-my %ERRORS=( OK => 0, WARNING => 1, CRITICAL => 2, UNKNOWN => 3 );
-my %ERRORCODES=( 0 => 'OK', 1 => 'WARNING', 2 => 'CRITICAL', 3 => 'UNKNOWN' );
-
-use vars qw ($PROGNAME $REVISION $CONTACT $TIMEOUT $STATEFILESDIR $needs_restart %commandline);
-
-$PROGNAME = "check_mssql_health";
-$REVISION = '$Revision: #PACKAGE_VERSION# $';
-$CONTACT = 'gerhard.lausser@consol.de';
-$TIMEOUT = 60;
-$STATEFILESDIR = '#STATEFILES_DIR#';
-$needs_restart = 0;
-
-my @modes = (
-  ['server::connectiontime',
-      'connection-time', undef,
-      'Time to connect to the server' ],
-  ['server::cpubusy',
-      'cpu-busy', undef,
-      'Cpu busy in percent' ],
-  ['server::iobusy',
-      'io-busy', undef,
-      'IO busy in percent' ],
-  ['server::fullscans',
-      'full-scans', undef,
-      'Full table scans per second' ],
-  ['server::connectedusers',
-      'connected-users', undef,
-      'Number of currently connected users' ],
-  ['server::database::transactions',
-      'transactions', undef,
-      'Transactions per second (per database)' ],
-  ['server::batchrequests',
-      'batch-requests', undef,
-      'Batch requests per second' ],
-  ['server::latch::waits',
-      'latches-waits', undef,
-      'Number of latch requests that could not be granted immediately' ],
-  ['server::latch::waittime',
-      'latches-wait-time', undef,
-      'Average time for a latch to wait before the request is met' ],
-  ['server::memorypool::lock::waits',
-      'locks-waits', undef,
-      'The number of locks per second that had to wait' ],
-  ['server::memorypool::lock::timeouts',
-      'locks-timeouts', undef,
-      'The number of locks per second that timed out' ],
-  ['server::memorypool::lock::deadlocks',
-      'locks-deadlocks', undef,
-      'The number of deadlocks per second' ],
-  ['server::sql::recompilations',
-      'sql-recompilations', undef,
-      'Re-Compilations per second' ],
-  ['server::sql::initcompilations',
-      'sql-initcompilations', undef,
-      'Initial compilations per second' ],
-  ['server::totalmemory',
-      'total-server-memory', undef,
-      'The amount of memory that SQL Server has allocated to it' ],
-  ['server::memorypool::buffercache::hitratio',
-      'mem-pool-data-buffer-hit-ratio', ['buffer-cache-hit-ratio'],
-      'Data Buffer Cache Hit Ratio' ],
-
-
-  ['server::memorypool::buffercache::lazywrites',
-      'lazy-writes', undef,
-      'Lazy writes per second' ],
-  ['server::memorypool::buffercache::pagelifeexpectancy',
-      'page-life-expectancy', undef,
-      'Seconds a page is kept in memory before being flushed' ],
-  ['server::memorypool::buffercache::freeliststalls',
-      'free-list-stalls', undef,
-      'Requests per second that had to wait for a free page' ],
-  ['server::memorypool::buffercache::checkpointpages',
-      'checkpoint-pages', undef,
-      'Dirty pages flushed to disk per second. (usually by a checkpoint)' ],
-
-
-  ['server::database::databasefree',
-      'database-free', undef,
-      'Free space in database' ],
-  ['server::database::backupage',
-      'database-backup-age', ['backup-age'],
-      'Elapsed time (in hours) since a database was last backupped' ],
-  ['server::sql',
-      'sql', undef,
-      'any sql command' ],
-  ['server::database::listdatabases',
-      'list-databases', undef,
-      'convenience function which lists all databases' ],
-  ['server::database::datafile::listdatafiles',
-      'list-datafiles', undef,
-      'convenience function which lists all datafiles' ],
-  ['server::memorypool::lock::listlocks',
-      'list-locks', undef,
-      'convenience function which lists all locks' ],
-);
-
-sub print_usage () {
-  print <<EOUS;
-  Usage:
-    $PROGNAME [-v] [-t <timeout>] --hostname=<db server hostname>
-        --username=<username> --password=<password> [--port <port>]
-        --mode=<mode>
-    $PROGNAME [-v] [-t <timeout>] --server=<db server>
-        --username=<username> --password=<password>
-        --mode=<mode>
-    $PROGNAME [-h | --help]
-    $PROGNAME [-V | --version]
-
-  Options:
-    --hostname
-       the database server
-    --port
-       the database server's port
-    --server
-       the name of a predefined connection
-    --currentdb
-       the name of a database which is used as the current database
-       for the connection. (don't use this parameter unless you
-       know what you're doing)
-    --username
-       the mssql user
-    --password
-       the mssql user's password
-    --warning
-       the warning range
-    --critical
-       the critical range
-    --mode
-       the mode of the plugin. select one of the following keywords:
-EOUS
-  my $longest = length ((reverse sort {length $a <=> length $b} map { $_->[1] } @modes)[0]);
-  my $format = "       %-".
-  (length ((reverse sort {length $a <=> length $b} map { $_->[1] } @modes)[0])).
-  "s\t(%s)\n";
-  foreach (@modes) {
-    printf $format, $_->[1], $_->[3];
-  }
-  printf "\n";
-  print <<EOUS;
-    --name
-       the name of the database etc depending on the mode.
-    --name2
-       if name is a sql statement, this statement would appear in
-       the output and the performance data. This can be ugly, so 
-       name2 can be used to appear instead.
-    --regexp
-       if this parameter is used, name will be interpreted as a 
-       regular expression.
-    --units
-       one of %, KB, MB, GB. This is used for a better output of mode=sql
-       and for specifying thresholds for mode=tablespace-free
-
-  Database-related modes check all databases in one run by default.
-  If only a single database should be checked, use the --name parameter.
-  The same applies to datafile-related modes.
-  
-  Options specific to 'server::sql' mode:
-
-    --sqleval
-       For results with multiple columns, this is the index (counting from
-       1) of the column to evaluate with --warning and/or --critical. If
-       this option is missing, the statement is assumed to return only a
-       single column.
-    --sqlname
-       For results with multiple columns, this is the index (counting from
-       1) of the column use as the output name (instead of --name2). If
-       this option is missing, only the first row will be parsed.
-    --sqlinfo
-       For results with multiple columns, this is the index (counting from
-       1) of a column to present as a detailed explanation.
-
-  In mode sql you can url-encode the statement so you will not have to mess
-  around with special characters in your Nagios service definitions.
-  Instead of 
-
-     --name="select count(*) from master..sysprocesses"
-
-  you can say 
-
-     --name=select%20count%28%2A%29%20from%20master%2E%2Esysprocesses
-
-  For your convenience you can call check_mssql_health with the --encode
-  option and it will encode the standard input.
-
-  You can find the full documentation for this plugin at:
-     http://www.consol.de/opensource/nagios/check-mssql-health
-  or http://www.consol.com/opensource/nagios/check-mssql-health
-
-EOUS
-#
-# --basis
-#  one of rate, delta, value
-  
-}
-
-sub print_help () {
-  print "Copyright (c) 2009 Gerhard Lausser\n\n";
-  print "\n";
-  print "  Check various parameters of MSSQL databases \n";
-  print "\n";
-  print_usage();
-  support();
-}
-
-
-sub print_revision ($$) {
-  my $commandName = shift;
-  my $pluginRevision = shift;
-  $pluginRevision =~ s/^\$Revision: //;
-  $pluginRevision =~ s/ \$\s*$//;
-  print "$commandName ($pluginRevision)\n";
-  print "This nagios plugin comes with ABSOLUTELY NO WARRANTY. You may redistribute\ncopies of this plugin under the terms of the GNU General Public License.\n";
-}
-
-sub support () {
-  my $support='Send email to gerhard.lausser@consol.de if you have questions\nregarding use of this software. \nPlease include version information with all correspondence (when possible,\nuse output from the --version option of the plugin itself).\n';
-  $support =~ s/@/\@/g;
-  $support =~ s/\\n/\n/g;
-  print $support;
-}
-
-sub contact_author ($$) {
-  my $item = shift;
-  my $strangepattern = shift;
-  if ($commandline{verbose}) {
-    printf STDERR
-        "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n".
-        "You found a line which is not recognized by %s\n".
-        "This means, certain components of your system cannot be checked.\n".
-        "Please contact the author %s and\nsend him the following output:\n\n".
-        "%s /%s/\n\nThank you!\n".
-        "++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++\n",
-            $PROGNAME, $CONTACT, $item, $strangepattern;
-  }
-}
-
-%commandline = ();
-my @params = (
-    "timeout|t=i",
-    "version|V",
-    "help|h",
-    "verbose|v",
-    "debug|d",
-    "hostname=s",
-    "username=s",
-    "password=s",
-    "port=i",
-    "server=s",
-    "currentdb=s",
-    "mode|m=s",
-    "tablespace=s",
-    "database=s",
-    "datafile=s",
-    "waitevent=s",
-    "name=s",
-    "name2=s",
-    "regexp",
-    "sqleval=i",
-    "sqlname=i",
-    "sqlinfo=i",
-    "perfdata",
-    "warning=s",
-    "critical=s",
-    "dbthresholds:s",
-    "absolute|a",
-    "basis",
-    "lookback|l=i",
-    "environment|e=s%",
-    "method=s",
-    "runas|r=s",
-    "scream",
-    "shell",
-    "eyecandy",
-    "encode",
-    "units=s",
-    "3",
-    "with-mymodules-dyn-dir=s",
-    "report=s",
-    "extra-opts:s");
-
-if (! GetOptions(\%commandline, @params)) {
-  print_help();
-  exit $ERRORS{UNKNOWN};
-}
-
-if (exists $commandline{'extra-opts'}) {
-  # read the extra file and overwrite other parameters
-  my $extras = Extraopts->new(file => $commandline{'extra-opts'}, commandline => \%commandline);
-  if (! $extras->is_valid()) {
-    printf "extra-opts are not valid: %s\n", $extras->{errors};
-    exit $ERRORS{UNKNOWN};
-  } else {
-    $extras->overwrite();
-  }
-}
-
-if (exists $commandline{version}) {
-  print_revision($PROGNAME, $REVISION);
-  exit $ERRORS{OK};
-}
-
-if (exists $commandline{help}) {
-  print_help();
-  exit $ERRORS{OK};
-} elsif (! exists $commandline{mode}) {
-  printf "Please select a mode\n";
-  print_help();
-  exit $ERRORS{OK};
-}
-
-if ($commandline{mode} eq "encode") {
-  my $input = <>;
-  chomp $input;
-  $input =~ s/([^A-Za-z0-9])/sprintf("%%%02X", ord($1))/seg;
-  printf "%s\n", $input;
-  exit $ERRORS{OK};
-}
-
-if (exists $commandline{3}) {
-  $ENV{NRPE_MULTILINESUPPORT} = 1;
-}
-
-if (exists $commandline{timeout}) {
-  $TIMEOUT = $commandline{timeout};
-}
-
-if (exists $commandline{verbose}) {
-  $DBD::MSSQL::Server::verbose = exists $commandline{verbose};
-}
-
-if (exists $commandline{scream}) {
-#  $DBD::MSSQL::Server::hysterical = exists $commandline{scream};
-}
-
-if (exists $commandline{report}) {
-  # short, long, html
-} else {
-  $commandline{report} = "long";
-}
-
-if (exists $commandline{'with-mymodules-dyn-dir'}) {
-  $DBD::MSSQL::Server::my_modules_dyn_dir = $commandline{'with-mymodules-dyn-dir'};
-} else {
-  $DBD::MSSQL::Server::my_modules_dyn_dir = '#MYMODULES_DYN_DIR#';
-}
-
-
-if (exists $commandline{environment}) {
-  # if the desired environment variable values are different from
-  # the environment of this running script, then a restart is necessary.
-  # because setting $ENV does _not_ change the environment of the running script.
-  foreach (keys %{$commandline{environment}}) {
-    if ((! $ENV{$_}) || ($ENV{$_} ne $commandline{environment}->{$_})) {
-      $needs_restart = 1;
-      $ENV{$_} = $commandline{environment}->{$_};
-      printf STDERR "new %s=%s forces restart\n", $_, $ENV{$_} 
-          if $DBD::MSSQL::Server::verbose;
-    }
-  }
-  # e.g. called with --runas dbnagio. shlib_path environment variable is stripped
-  # during the sudo.
-  # so the perl interpreter starts without a shlib_path. but --runas cares for
-  # a --environment shlib_path=...
-  # so setting the environment variable in the code above and restarting the 
-  # perl interpreter will help it find shared libs
-}
-
-if (exists $commandline{runas}) {
-  # remove the runas parameter
-  # exec sudo $0 ... the remaining parameters
-  $needs_restart = 1;
-  # if the calling script has a path for shared libs and there is no --environment
-  # parameter then the called script surely needs the variable too.
-  foreach my $important_env qw(LD_LIBRARY_PATH SHLIB_PATH 
-      MSSQL_HOME TNS_ADMIN ORA_NLS ORA_NLS33 ORA_NLS10) {
-    if ($ENV{$important_env} && ! scalar(grep { /^$important_env=/ } 
-        keys %{$commandline{environment}})) {
-      $commandline{environment}->{$important_env} = $ENV{$important_env};
-      printf STDERR "add important --environment %s=%s\n", 
-          $important_env, $ENV{$important_env} if $DBD::MSSQL::Server::verbose;
-    }
-  }
-}
-
-if ($needs_restart) {
-  my @newargv = ();
-  my $runas = undef;
-  if (exists $commandline{runas}) {
-    $runas = $commandline{runas};
-    delete $commandline{runas};
-  }
-  foreach my $option (keys %commandline) {
-    if (grep { /^$option/ && /=/ } @params) {
-      if (ref ($commandline{$option}) eq "HASH") {
-        foreach (keys %{$commandline{$option}}) {
-          push(@newargv, sprintf "--%s", $option);
-          push(@newargv, sprintf "%s=%s", $_, $commandline{$option}->{$_});
-        }
-      } else {
-        push(@newargv, sprintf "--%s", $option);
-        push(@newargv, sprintf "%s", $commandline{$option});
-      }
-    } else {
-      push(@newargv, sprintf "--%s", $option);
-    }
-  }
-  if ($runas && ($> == 0)) {
-    # this was not my idea. some people connect as root to their nagios clients.
-    exec "su", "-c", sprintf("%s %s", $0, join(" ", @newargv)), "-", $runas;
-  } elsif ($runas) {
-    exec "sudo", "-S", "-u", $runas, $0, @newargv;
-  } else {
-    exec $0, @newargv;  
-    # this makes sure that even a SHLIB or LD_LIBRARY_PATH are set correctly
-    # when the perl interpreter starts. Setting them during runtime does not
-    # help loading e.g. libclntsh.so
-  }
-  exit;
-}
-
-if (exists $commandline{shell}) {
-  # forget what you see here.
-  system("/bin/sh");
-}
-
-if (exists $commandline{name}) {
-  # objects can be encoded like an url
-  # with s/([^A-Za-z0-9])/sprintf("%%%02X", ord($1))/seg;
-  if (($commandline{mode} ne "sql") || 
-      (($commandline{mode} eq "sql") &&
-       ($commandline{name} =~ /select%20/i))) { # protect ... like '%cac%' ... from decoding
-    $commandline{name} =~ s/\%([A-Fa-f0-9]{2})/pack('C', hex($1))/seg;
-  }
-  if ($commandline{name} =~ /^0$/) {
-    # without this, $params{selectname} would be treated like undef
-    $commandline{name} = "00";
-  } 
-}
-
-$SIG{'ALRM'} = sub {
-  printf "UNKNOWN - %s timed out after %d seconds\n", $PROGNAME, $TIMEOUT;
-  exit $ERRORS{UNKNOWN};
-};
-alarm($TIMEOUT);
-
-my $nagios_level = $ERRORS{UNKNOWN};
-my $nagios_message = "";
-my $perfdata = "";
-my $racmode = 0;
-if ($commandline{mode} =~ /^rac-([^\-.]+)/) {
-  $racmode = 1;
-  $commandline{mode} =~ s/^rac\-//g;
-}
-if ($commandline{mode} =~ /^my-([^\-.]+)/) {
-  my $param = $commandline{mode};
-  $param =~ s/\-/::/g;
-  push(@modes, [$param, $commandline{mode}, undef, 'my extension']);
-} elsif ((! grep { $commandline{mode} eq $_ } map { $_->[1] } @modes) &&
-    (! grep { $commandline{mode} eq $_ } map { defined $_->[2] ? @{$_->[2]} : () } @modes)) {
-  printf "UNKNOWN - mode %s\n", $commandline{mode};
-  print_usage();
-  exit 3;
-}
-
-my %params = (
-    timeout => $TIMEOUT,
-    mode => (
-        map { $_->[0] } 
-        grep {
-           ($commandline{mode} eq $_->[1]) || 
-           ( defined $_->[2] && grep { $commandline{mode} eq $_ } @{$_->[2]}) 
-        } @modes
-    )[0],
-    cmdlinemode => $commandline{mode},
-    method => $commandline{method} ||
-        $ENV{NAGIOS__SERVICEMSSQL_METH} ||
-        $ENV{NAGIOS__HOSTMSSQL_METH} || 'dbi',
-    hostname => $commandline{hostname}  || 
-        $ENV{NAGIOS__SERVICEMSSQL_HOST} ||
-        $ENV{NAGIOS__HOSTMSSQL_HOST},
-    username => $commandline{username} || 
-        $ENV{NAGIOS__SERVICEMSSQL_USER} ||
-        $ENV{NAGIOS__HOSTMSSQL_USER},
-    password => $commandline{password} || 
-        $ENV{NAGIOS__SERVICEMSSQL_PASS} ||
-        $ENV{NAGIOS__HOSTMSSQL_PASS},
-    port => $commandline{port} || 
-        $ENV{NAGIOS__SERVICEMSSQL_PORT} ||
-        $ENV{NAGIOS__HOSTMSSQL_PORT},
-    server => $commandline{server}  || 
-        $ENV{NAGIOS__SERVICEMSSQL_SERVER} ||
-        $ENV{NAGIOS__HOSTMSSQL_SERVER},
-    currentdb => $commandline{currentdb}  || 
-        $ENV{NAGIOS__SERVICEMSSQL_CURRENTDB} ||
-        $ENV{NAGIOS__HOSTMSSQL_CURRENTDB},
-    warningrange => $commandline{warning},
-    criticalrange => $commandline{critical},
-    dbthresholds => $commandline{dbthresholds},
-    absolute => $commandline{absolute},
-    lookback => $commandline{lookback},
-    tablespace => $commandline{tablespace},
-    database => $commandline{database},
-    datafile => $commandline{datafile},
-    basis => $commandline{basis},
-    selectname => $commandline{name} || $commandline{tablespace} || $commandline{datafile},
-    regexp => $commandline{regexp},
-    name => $commandline{name},
-    name2 => $commandline{name2} || $commandline{name},
-    sqleval => $commandline{sqleval},
-    sqlname => $commandline{sqlname},
-    sqlinfo => $commandline{sqlinfo},
-    units => $commandline{units},
-    eyecandy => $commandline{eyecandy},
-    statefilesdir => $STATEFILESDIR,
-    verbose => $commandline{verbose},
-    report => $commandline{report},
-);
-
-my $server = undef;
-
-$server = DBD::MSSQL::Server->new(%params);
-$server->nagios(%params);
-$server->calculate_result();
-$nagios_message = $server->{nagios_message};
-$nagios_level = $server->{nagios_level};
-$perfdata = $server->{perfdata};
-
-printf "%s - %s", $ERRORCODES{$nagios_level}, $nagios_message;
-printf " | %s", $perfdata if $perfdata;
-printf "\n";
-exit $nagios_level;