diff --git a/check_emc_clariion/trunk/capacity.cli b/check_emc_clariion/trunk/capacity.cli
new file mode 100644
index 0000000..9c23adf
--- /dev/null
+++ b/check_emc_clariion/trunk/capacity.cli
@@ -0,0 +1,2 @@
+show pool capacity
+quit
diff --git a/check_emc_clariion/trunk/check_emc_centera.pl b/check_emc_clariion/trunk/check_emc_centera.pl
new file mode 100644
index 0000000..f7b284f
--- /dev/null
+++ b/check_emc_clariion/trunk/check_emc_centera.pl
@@ -0,0 +1,305 @@
+#!/usr/bin/perl -w
+
+# ------------------------------------------------------------------------------
+# check_emc_centera.pl - checks the EMC CENTERA storage devices
+# Copyright (C) 2008  NETWAYS GmbH, www.netways.de
+# Author: Michael Streb <michael.streb@netways.de>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+# $Id: check_emc.pl 1725 2007-07-31 13:11:06Z mstreb $
+# ------------------------------------------------------------------------------
+
+# basic requirements
+use strict;
+use Getopt::Long;
+use File::Basename;
+use Pod::Usage;
+use POSIX;
+
+# predeclared subs
+use subs qw/print_help check_value bool_state trim/;
+
+# predeclared vars
+use vars qw (
+  $PROGNAME
+  $VERSION
+  $JAVA
+  $CENTERA_VIEWER
+
+  %state_names
+  $state
+
+  $opt_host
+  $opt_user
+  $opt_pass
+  $opt_node
+  $opt_pool
+  $node_name
+  $opt_verbose
+  $opt_help
+  $opt_checktype
+  $opt_script
+  $opt_man
+
+  $output
+
+);
+
+my $dummy;
+
+# Main values
+$PROGNAME = basename($0);
+$VERSION  = '1.1';
+$JAVA = '/usr/bin/java';
+$CENTERA_VIEWER = "/usr/local/nagios/libexec/EMC/CenteraViewer\.jar";
+
+# Nagios exit states
+our %states = (
+	OK       => 0,
+	WARNING  => 1,
+	CRITICAL => 2,
+	UNKNOWN  => 3
+);
+
+# Nagios state names
+%state_names = (
+	0 => 'OK',
+	1 => 'WARNING',
+	2 => 'CRITICAL',
+	3 => 'UNKNOWN'
+);
+
+# Get the options from cl
+Getopt::Long::Configure('bundling');
+GetOptions(
+	'h'       => \$opt_help,
+	'H=s'     => \$opt_host,
+	'u=s'     => \$opt_user,
+	'p=s'     => \$opt_pass,
+	'node=s'     => \$opt_node,
+	'pool=s'     => \$opt_pool,
+	't=s',    => \$opt_checktype,
+	'script=s',    => \$opt_script,
+	'man',    => \$opt_man
+  )
+  || print_help( 1, 'Please check your options!' );
+
+# If somebody wants to the help ...
+if ($opt_help) {
+	print_help(1);
+}
+elsif ($opt_man) {
+        print_help(99);
+}
+
+# Check if all needed options present.
+if ( $opt_host && $opt_checktype && $opt_user && $opt_pass && $opt_script) {
+	# do the work
+	if ($opt_checktype eq "node_status" && $opt_node ne "") {
+		check_node_status();
+	}
+	if ($opt_checktype eq "capacity" && $opt_pool ne "") {
+		check_pool_capacity();
+	}
+	print_help(1, 'Wrong parameters specified!');
+}
+else {
+
+	print_help( 1, 'Too few options!' );
+}
+
+# -------------------------
+# THE SUBS:
+# -------------------------
+
+# check_node_status();
+# checks the node status of the centera devices
+sub check_node_status {
+	open (VIEWEROUT ,"$JAVA -cp $CENTERA_VIEWER com.filepool.remote.cli.CLI -u $opt_user -p $opt_pass -ip $opt_host -script $opt_script |");
+	my $node_line = 0;
+	my $error_count = 0;
+	my $access_node = 0;
+	while (<VIEWEROUT>) {
+		chomp $_;
+		if ($_ =~ m/Node\s+($opt_node)/ ) {
+			# got an DPE line
+			$node_line = 1;
+			$node_name = $1;
+			$access_node = 0;
+			next;
+		} 
+		if ($node_line == 1) {
+			my $status;
+			my $roles;
+			if ($_ =~ m/^\s+Status:\s+(\w+)$/) {
+				$status = $1;
+				if ($status =~ m/on/) {
+					$output = "$node_name: Status $status; ";
+				} else {
+					$output = "$node_name: Status $status; ";
+					$error_count++;
+				}
+			}	
+			if ($_ =~ m/Roles:\s+(.*)/) {
+				$roles = $1;
+				if ($roles =~ m/access/) {
+					$output .= "Roles $roles";
+					$access_node = 1;
+				} else {
+					$output .= "Roles $roles";
+					$node_line = 0;
+				}
+				if ($access_node) {;
+					$output .= "; ";
+				}
+			}	
+
+			if ($access_node) {
+				if ($_ =~ m/Hardware\sFailures\/Exceptions:\s+\w+:connected/) {
+					$output .= "access node connected";
+					$node_line = 0;
+				} elsif ($_ =~ m/Hardware\sFailures\/Exceptions:\s+\w+/) {
+					$output .= "access node NOT connected";
+					$node_line = 0;
+					$error_count++;
+				}
+			}
+		}
+	}
+	close (VIEWEROUT);
+
+	if ($error_count == 0 && $output ne "") {
+		$state = 'OK';
+	} elsif ($output eq "" ) {
+		$output = "UNKNOWN: node $opt_node not found";
+		$state = 'UNKNOWN';
+	} else {
+		$state = 'CRITICAL';
+	}
+	print $output."\n";
+	exit $states{$state};
+	
+}
+
+# check_pool_capacity();
+# checks the node status of the centera devices
+sub check_pool_capacity {
+	open (VIEWEROUT ,"$JAVA -cp $CENTERA_VIEWER com.filepool.remote.cli.CLI -u $opt_user -p $opt_pass -ip $opt_host -script $opt_script |");
+	my @values;
+	while (<VIEWEROUT>) {
+		chomp $_;
+		if ($_ =~ m/^$opt_pool/ ) {
+			@values = split(/\s+/, $_);
+		}
+	}
+	close (VIEWEROUT);
+
+	# strip out the seperator
+	$values[1] =~ s/,//g;
+	$values[3] =~ s/,//g;
+	$values[5] =~ s/,//g;
+	
+	$output = "Pool $opt_pool: Size: $values[1] $values[2], Used: $values[3] $values[4] , Free: $values[5] $values[6]";	
+	print $output."\n";
+	exit $states{'OK'};
+	
+}
+
+# print_help($level, $msg);
+# prints some message and the POD DOC
+sub print_help {
+	my ( $level, $msg ) = @_;
+	$level = 0 unless ($level);
+	pod2usage(
+		{
+			-message => $msg,
+			-verbose => $level
+		}
+	);
+
+	exit( $states{UNKNOWN} );
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+check_emc.pl - Checks EMC SAN devies for NAGIOS.
+
+=head1 SYNOPSIS
+
+check_emc.pl -h
+
+check_emc.pl --man
+
+check_emc.pl -H <host> -t <checktype>
+
+=head1 DESCRIPTION
+
+B<check_emc.pl> recieves the data from the emc devices via navicli.
+
+=head1 OPTIONS
+
+=over 8
+
+=item B<-h>
+
+Display this helpmessage.
+
+=item B<-H>
+
+The hostname or ipaddress of the emc centera device.
+
+=item B<-t>
+
+The check type to execute:
+
+the following checks are currently available
+
+node_status   - checks the status of the centera nodes
+
+capacity      - check the drive usage
+
+=item B<-u>
+
+administrative user used for the cli connection
+
+=item B<-p>
+
+administrative password used for the cli connection
+
+=item B<--node>
+
+the cluster node to check (ony used with check type node_status)
+
+=item B<--script>
+
+cli script with commands executed on the centera command line
+
+=cut
+
+=head1 VERSION
+
+$Id: check_emc.pl 1725 2008-04-16 13:11:06Z mstreb $
+
+=head1 AUTHOR
+
+NETWAYS GmbH, 2008, http://www.netways.de.
+
+Written by Michael Streb <michael.streb@netways.de>.
+
+Please report bugs through the contact of Nagios Exchange, http://www.nagiosexchange.org. 
diff --git a/check_emc_clariion/trunk/check_emc_clariion.pl b/check_emc_clariion/trunk/check_emc_clariion.pl
new file mode 100644
index 0000000..6a063e8
--- /dev/null
+++ b/check_emc_clariion/trunk/check_emc_clariion.pl
@@ -0,0 +1,679 @@
+#!/usr/bin/perl -w
+
+# nagios: -epn
+# ------------------------------------------------------------------------------
+# check_emc_clariion.pl - checks the EMC CLARIION SAN devices
+# Copyright (C) 2005  NETWAYS GmbH, www.netways.de
+# Author: Michael Streb <michael.streb@netways.de>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version 2
+# of the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+# $Id$
+# ------------------------------------------------------------------------------
+# 
+
+# basic requirements
+use strict;
+use Getopt::Long;
+use File::Basename;
+use Pod::Usage;
+
+# predeclared subs
+use subs qw/print_help check_sp check_disk check_portstate check_hbastate check_cache check_faults/;
+
+# predeclared vars
+use vars qw (
+  $PROGNAME
+  $VERSION
+  $NAVICLI
+  $NAVISECCLI
+
+  %state_names
+  $state
+
+  $opt_host
+  $opt_sp
+  $opt_verbose
+  $opt_help
+  $opt_checktype
+  $opt_pathcount
+  $opt_node
+  $opt_user
+  $opt_password
+
+  $output
+
+  $secure
+
+);
+
+my $output;
+
+### add some declaration in order to manage the --port option for check_portstate();
+my $opt_port;
+$opt_port=-1;
+
+# a variable in order to manage the secure mode of Navicli
+my $secure;
+$secure=0;
+
+# Main values
+$PROGNAME = basename($0);
+$VERSION  = '1.0';
+$NAVICLI = '/opt/Navisphere/bin/navicli';
+$NAVISECCLI = '/opt/Navisphere/bin/naviseccli';
+
+# Nagios exit states
+our %states = (
+	OK       => 0,
+	WARNING  => 1,
+	CRITICAL => 2,
+	UNKNOWN  => 3
+);
+
+# Nagios state names
+%state_names = (
+	0 => 'OK',
+	1 => 'WARNING',
+	2 => 'CRITICAL',
+	3 => 'UNKNOWN'
+);
+
+# Get the options from cl
+Getopt::Long::Configure('bundling');
+GetOptions(
+	'h'       => \$opt_help,
+	'help'    => \$opt_help,
+	'H=s'     => \$opt_host,
+	'node=s'  => \$opt_node,
+	'sp=s'    => \$opt_sp,
+	't=s'     => \$opt_checktype,
+	'u=s'     => \$opt_user,
+	'p=s'     => \$opt_password,
+	'port=s'  => \$opt_port,
+	'paths=s' => \$opt_pathcount
+  ) || print_help(2);
+
+# If somebody wants to the help ...
+if ($opt_help) {
+	print_help(2);
+}
+# check if user and password for Naviseccli is given
+# If it is providen, then it passes in secure mode for the command to the array.
+# else we are staying in navicli mode
+if ( $opt_user && $opt_password ) {
+	$secure = 1;
+}
+
+# Check if all needed options present.
+if ( $opt_host && $opt_checktype ) {
+	# do the work
+	if ($opt_checktype eq "sp" && $opt_sp ne "") {
+		check_sp();
+	}
+	if ($opt_checktype eq "disk") {
+		check_disk();
+	}
+	if ($opt_checktype eq "cache") {
+		check_cache();
+	}
+	if ($opt_checktype eq "faults") {
+		check_faults();
+	}
+	if ($opt_checktype eq "portstate" && $opt_sp ne "") {
+		check_portstate();
+	}
+	if ($opt_checktype eq "hbastate" && $opt_pathcount ne "" && $opt_node ne "") {
+		check_hbastate();
+	}
+	print_help(1, 'Wrong parameters specified!');
+}
+else {
+	print_help(2);
+}
+
+# -------------------------
+# THE SUBS:
+# -------------------------
+
+# check_sp();
+# check state of the storage processors
+sub check_sp {
+	if ($secure eq 0 ) {
+		open (NAVICLIOUT ,"$NAVICLI -h $opt_host getcrus |");
+	}
+	if ($secure eq 1 ) {
+		open (NAVICLIOUT ,"$NAVISECCLI -User $opt_user -Password $opt_password -Scope 0 -h $opt_host getcrus |");
+	}
+	my $sp_line = 0;
+	my $error_count = 0;
+	while (<NAVICLIOUT>) {
+		if ($_ =~ m/^DPE|^SPE|^DAE/ ) {
+			# got an DPE line
+			$sp_line=1;
+		}
+		if ($sp_line == 1) {
+			# check for SP lines
+			if( $_ =~ m/^SP\s$opt_sp\s\w+:\s+(\w+)/) {
+				if ($1 =~ m/(Present|Valid)/) {
+					$output .= "SP $opt_sp $1,";
+				} else {
+					$output .= "SP $opt_sp failed,";
+					$error_count++;
+				}	
+			}
+			# check for Enclosure lines
+			if( $_ =~ m/Enclosure\s(\d+|\w+)\s(\w+)\s$opt_sp\d?\s\w+:\s+(.*)/) {
+				my $check = $2;
+				if ($3 =~ m/Present|Valid|N\/A|255.255/) {
+					$output .= "$check ok,";
+				} else {
+					$output .= "$check failed,";
+					$error_count++;
+				}	
+			}
+			# check for Cabling lines
+			if( $_ =~ m/Enclosure\s(\d+|\w+)\s\w+\s$opt_sp\s(\w+)\s\w+:\s+(.*)/) {
+				my $check = $2;
+				if ($3 =~ m/Present|Valid|N\/A|255.255/) {
+					$output .= "$check ok,";
+				} else {
+					$output .= "$check failed,";
+					$error_count++;
+				}	
+			}
+			# end of section
+			if ( $_ =~ m/^\s*$/) {
+				$sp_line=0;
+			}
+		}
+	}
+	close (NAVICLIOUT);
+	if ($error_count == 0 && $output ne "") {
+		$state = 'OK';
+	} elsif ($output eq "") {
+		$output = "UNKNOWN: No output from $NAVICLI";
+		$state = 'UNKNOWN';
+	} else {
+		$state = 'CRITICAL';
+	}
+	print $output."\n";
+	exit $states{$state};
+	
+}
+
+# check_disk();
+# check state of the disks
+sub check_disk {
+	my $disk_line = 0;
+	my $crit_count = 0;
+	my $warn_count = 0;
+	my $hotspare_count = 0;
+	my $disk_ok_count = 0;
+	my ($bus,$enclosure,$disk) = 0;
+	$state = 'UNKNOWN';
+	if ($secure eq 0 ) {
+		open (NAVICLIOUT ,"$NAVICLI -h $opt_host getdisk -state |");
+	}
+	if ($secure eq 1 ) {
+		open (NAVICLIOUT ,"$NAVISECCLI -User $opt_user -Password $opt_password -Scope 0 -h $opt_host getdisk -state |");
+	}
+	while (<NAVICLIOUT>) {
+		# check for disk lines
+		if( $_ =~ m/^Bus\s(\d+)\s\w+\s(\d+)\s+\w+\s+(\d+)/) {
+			$bus = $1;
+			$enclosure = $2;
+			$disk = $3;
+			$disk_line=1;
+		}
+
+		if ($disk_line == 1) {
+			# check for States lines
+			if( $_ =~ m/^State:\s+(.*)$/) {
+				my $status = $1;
+				if ($status =~ m/Hot Spare Ready/) {
+					$hotspare_count++;
+					$disk_ok_count++;
+				} elsif ($status =~ m/Binding|Empty|Enabled|Expanding|Unbound|Powering Up|Ready|Transitioning/) {
+					$disk_ok_count++;
+				} elsif ($status =~ m/Equalizing|Rebuilding/) {
+					$warn_count++;
+					$output .= "Bus $bus, Enclosure $enclosure, Disk $disk is replaced or is being rebuilt, ";
+				} else {
+					$crit_count++;
+					$output .= "Bus $bus, Enclosure $enclosure, Disk $disk is critical, ";
+				}	
+			}
+		}
+
+		# end of section
+		if ( $_ =~ m/^\s*$/) {
+			$disk_line=0;
+		}
+	}
+	close (NAVICLIOUT);
+	if ($disk_ok_count eq 0) {
+		print "No disk were founded !\n";
+		$state = 'UNKNOWN';
+	} elsif ($crit_count > 0) {
+		$state='CRITICAL';
+	} elsif ($warn_count > 0 || $hotspare_count eq 0) {
+		$state='WARNING';
+	} else {
+		$state='OK';
+	}
+	$output .= $disk_ok_count." physical disks are OK. ".$hotspare_count." Hotspares are ready.";
+	print $output."\n";
+	exit $states{$state};
+}
+
+# check_cache();
+# check state of the read and write cache
+sub check_cache {
+	my $read_state = 0;
+	my $write_state = 0;
+	my $write_mirrored_state = 0;
+	my $crit_count = 0;
+	my $warn_count = 0;
+	$state = 'UNKNOWN';
+	if ($secure eq 0 ) {
+		open (NAVICLIOUT ,"$NAVICLI -h $opt_host getcache |");
+	}
+	if ($secure eq 1 ) {
+		open (NAVICLIOUT ,"$NAVISECCLI -User $opt_user -Password $opt_password -Scope 0 -h $opt_host getcache |");
+	}
+	while (<NAVICLIOUT>) {
+		# check for cache
+		if( $_ =~ m/^SP Read Cache State\s+(\w+)/) {
+			$read_state = $1;
+			if ($read_state =~ m/Enabled/) {
+				$output .= "Read cache is enable, ";
+			} else {
+				$output .= "Read cache is not enable ! ";
+				$warn_count++;
+			}
+		} elsif ( $_ =~ m/^SP Write Cache State\s+(\w+)/) {
+			$write_state = $1;
+			if ($write_state =~ m/Enabled/) {
+				$output .= "Write cache is enable, ";
+			} else {
+				$output .= "Write cache is not enable ! ";
+				$crit_count++;
+			}
+		} elsif ( $_ =~ m/^Write Cache Mirrored\:\s+(\w+)/) {
+			$write_mirrored_state = $1;
+			if ($write_mirrored_state =~ m/YES/) {
+				$output .= "Write cache mirroring is enable.";
+			} else {
+				$output .= "The Write cache mirroring is not enable !";
+				$crit_count++;
+			}
+		}
+	}
+	close (NAVICLIOUT);
+	if ( !defined($output) ) {
+		print "No output from the command getcache !\n";
+		$state = 'UNKNOWN';
+		exit $states{$state};
+	} elsif ($crit_count > 0) {
+		$state='CRITICAL';
+	} elsif ($warn_count > 0 ) {
+		$state='WARNING';
+	} else {
+		$state='OK';
+	}
+	print $output."\n";
+	exit $states{$state};
+}
+
+# check_faults();
+# check state of the different faults
+# only works with naviseccli
+sub check_faults {
+	$state = 'UNKNOWN';
+	if ($secure eq 0 ) {
+		print "The check of the faults only works with Naviseccli. Please provide user and password with -u and -p options !\n";
+		exit $states{$state};
+	}
+	if ($secure eq 1 ) {
+		open (NAVICLIOUT ,"$NAVISECCLI -User $opt_user -Password $opt_password -Scope 0 -h $opt_host Faults -list |");
+	}
+	while (<NAVICLIOUT>) {
+		# check for faults on the array
+		if( $_ =~ m/^The array is operating normally/) {
+			$state='OK';
+			$output .= $_ ;
+			close (NAVICLIOUT);
+			print $output."\n";			
+			exit $states{$state};
+		} else {
+			$state='CRITICAL';
+			$output .= $_ ;
+		}
+	}
+	close (NAVICLIOUT);
+	if ( !defined($output) ) {
+		print "No output from the command Faults -list !\n";
+		$state = 'UNKNOWN';
+		exit $states{$state};
+	}
+	print $output."\n";
+	exit $states{$state};
+}
+
+# check_portstate();
+# check port state of the sp`s
+sub check_portstate {
+	my $sp_section = 0;
+	my $sp_line = 0;
+	my $portstate_line = 0;
+	my $error_count = -1;
+	my ($port_id,$enclosure,$disk) = 0;
+	$state = 'UNKNOWN';
+	if ($secure eq 0 ) {
+		open (NAVICLIOUT ,"$NAVICLI -h $opt_host getall -hba |");
+	}
+	if ($secure eq 1 ) {
+		open (NAVICLIOUT ,"$NAVISECCLI -User $opt_user -Password $opt_password -Scope 0 -h $opt_host getall -hba |");
+	}
+	while (<NAVICLIOUT>) {
+		# check for port lines
+		if ($_ =~ m/SPPORT/ ) {
+			$sp_section = 1;
+		}
+		# check for requested SP
+		if( $_ =~ m/^SP\sName:\s+SP\s$opt_sp/ ) {
+			$sp_line = 1;
+		}
+		# check for requested port id
+		if ($opt_port >=0) {
+			if( $_ =~ m/^SP\sPort\sID:\s+($opt_port)$/) {
+				$port_id = $1;
+				$portstate_line = 1;
+				$error_count = 0;
+			} 
+		} else {
+
+			### if( $_ =~ m/^SP\sPort\sID:\s+($opt_port)$/) {
+			if( $_ =~ m/^SP\sPort\sID:\s+(\d+)$/) {
+				$port_id = $1;
+				$portstate_line = 1;
+				$error_count = 0;
+			} 
+		}
+
+		if ($sp_section == 1 && $sp_line == 1 && $portstate_line == 1) {
+			# check for Link line
+			if( $_ =~ m/^Link\sStatus:\s+(.*)$/) {
+				my $status = $1; 
+				if ($status =~ m/Up/) {
+					$output .= "SP $opt_sp Port: $port_id, Link: $status, ";
+				} else {
+					$output .= "SP $opt_sp Port: $port_id, Link: $status, ";
+					$error_count++;
+				}	
+			}
+			# check for Link line
+			### check for Port line
+			if( $_ =~ m/^Port\sStatus:\s+(.*)$/) {
+				my $status = $1;
+				if ($status =~ m/Online/) {
+					$output .= "State: $status, ";
+				} else {
+					$output .= "State: $status, ";
+					$error_count++;
+				}	
+			}
+			# check for Connection Type
+			if( $_ =~ m/^Connection\sType:\s+(.*)$/) {
+				my $type = $1;
+				$output .= "Connection Type: $type. ";
+			}
+			# end of section
+			if ( $_ =~ m/^\s*$/) {
+				$portstate_line = 0;
+				### $sp_section = 0;
+				if ($opt_port >=0 ) {
+					$sp_section = 0;
+				}
+				$sp_line = 0;
+			}
+		}
+	}
+	close (NAVICLIOUT);
+	if ($error_count == 0) {
+		$state='OK';
+	} elsif ($error_count == -1) {
+		$state='UNKNOWN';
+		$output = 'UNKNOWN: specified port not found '.$opt_port;
+	} else {
+		$state='CRITICAL';
+	}
+		
+	print $output."\n";
+	exit $states{$state};
+}
+
+# check_hbastate();
+# check hba and path states for specific client
+sub check_hbastate {
+	$state = 'UNKNOWN';
+	my $hba_node;
+	my $hba_node_line = 0;
+	my $hba_section = 0;
+	my $hba_port_section = 0;
+	my $hba_port_count = 0;
+	my $hba_uid = "";
+	my $error_count = 0;
+	my $output = "";
+	if ($secure eq 0 ) {
+		open (NAVICLIOUT ,"$NAVICLI -h $opt_host getall -hba |");
+	}
+	if ($secure eq 1 ) {
+		open (NAVICLIOUT ,"$NAVISECCLI -User $opt_user -Password $opt_password -Scope 0 -h $opt_host getall -hba |");
+	}
+	while (<NAVICLIOUT>) {
+		if ($_ =~ m/Information\sabout\seach\sHBA/) {
+			$hba_section = 1;
+			$hba_port_section = 0;
+			$hba_node_line = 0;
+		}
+		if ($hba_section == 1) {
+			if ($_ =~ m/^HBA\sUID:\s+((\w+:?)+)/i) {
+				$hba_uid=$1;
+			}
+			if ($_ =~ m/^Server\sName:\s+($opt_node)/i) {
+				$hba_node = $1;
+				$hba_node_line = 1;
+			}
+			if ($_ =~ m/Information\sabout\seach\sport\sof\sthis\sHBA/) {
+				$hba_section = 0;
+				$hba_port_section = 1;
+			}
+		}
+		
+
+		if ($hba_port_section && $hba_node_line) {
+			if ($_ =~ m/SP\sName:\s+(\w+\s+\w+)/) {
+				$output .= "$hba_uid connected to: $1, ";
+			}
+			if ($_ =~ m/SP\sPort\sID:\s+(\d+)/) {
+				$output .= "port: $1, ";
+			}
+			if ($_ =~ m/Logged\sIn:\s+(YES)/) {
+				$output .= "Logged in: $1; ";
+				$hba_port_count++;
+			} elsif ($_ =~ m/Logged\sIn:\s+(\w+)/) {
+				$output .= "Logged in: $1; <br>";
+				$error_count++;
+			}
+		}
+	}
+	close (NAVICLIOUT);
+	
+
+	if ($error_count == 0 && $hba_port_count == $opt_pathcount) {
+		$state='OK';
+	} elsif (lc($opt_node) ne lc($hba_node) ) {
+		$state='UNKNOWN';
+		$output = 'UNKNOWN: specified node not found '.$opt_node;
+	} elsif ($hba_port_count != $opt_pathcount) {
+		$output .= " error in pathcount from client to SAN: suggested $opt_pathcount detected $hba_port_count";
+		$state='CRITICAL';
+	} elsif ($error_count != 0 && $hba_port_count == $opt_pathcount) {
+		$output .= " Error in Configuration, one path not connected !";
+		$state='CRITICAL';
+	}
+		
+	print $opt_node."<br>".$output."\n";
+	exit $states{$state};
+}
+
+# print_help($level, $msg);
+# prints some message and the POD DOC
+sub print_help {
+	my ( $level, $msg ) = @_;
+	$level = 0 unless ($level);
+	pod2usage(
+		{
+			-message => $msg,
+			-verbose => $level,
+			-noperldoc => 1
+		}
+	);
+
+	exit( $states{UNKNOWN} );
+}
+
+1;
+
+__END__
+
+=head1 NAME
+
+check_emc_clariion.pl - Checks EMC SAN devices for NAGIOS.
+
+
+=head1 SYNOPSIS
+
+check_emc_clariion.pl -h | --help
+
+check_emc_clariion.pl -H <host> -t <checktype>
+
+check_emc_clariion.pl -H <host> -u <user> -p <password> -t <checktype>
+
+
+=head1 DESCRIPTION
+
+B<check_emc_clariion.pl> receives the data from the emc devices via Navicli or Naviseccli if user and password are provided.
+
+
+=head1 OPTIONS
+
+=over 8
+
+=item B<-h>
+
+Display this helpmessage.
+
+=item B<-H>
+
+The hostname or ipaddress of the emc storage processor device.
+
+=item B<-u>
+
+The user used to connect to the emc storage processor device with Naviseccli.
+You must use this option with -password !
+
+=item B<-p>
+
+The password of the user used to connect to the emc storage processor device with Naviseccli.
+
+=item B<-t>
+
+The check type to execute:
+
+=back
+
+=head2 TYPES 
+
+the following checks are currently available
+
+sp   - check the status of the storage processors
+
+disk - check the status of the physical disks attached in the DAE`s
+
+cache - check the status of the read and write cache
+
+faults - Report the different faults on the array
+
+portstate - check the status of the FC ports in the SP`s
+
+hbastate - check the connection state of the specified node
+
+=head3 TYPE OPTIONS
+
+=head4 sp
+
+=over 8
+
+=item B<--sp>
+
+The storageprocessor to check e.g. A or B 
+
+=back
+
+=head4 portstate
+
+=over 8
+
+=item B<--sp>
+
+The storageprocessor to check e.g. A or B 
+
+=item B<--port>
+ 
+The port ID to check e.g. 0 or 1 or 0, 1, 2 or 3 for Clariion CX3-80
+
+- if not specified, all ports are checked
+
+=back
+
+=head4 hbastate
+
+=over 8
+
+=item B<--node>
+
+The node name to check out of navisphere 
+
+=item B<--paths>
+
+The number of available FC Paths from the client to the SAN Infrastructure e.g. 2
+
+=cut
+
+=back
+
+=head1 VERSION
+
+$Id$
+
+=head1 AUTHOR
+
+NETWAYS GmbH, 2008, http://www.netways.de.
+
+Written by Michael Streb <michael.streb@netways.de>.
+
+Please report bugs through the contact of Nagios Exchange, http://www.nagiosexchange.org. 
diff --git a/check_emc_clariion/trunk/checkcommands.cfg b/check_emc_clariion/trunk/checkcommands.cfg
new file mode 100644
index 0000000..c021e54
--- /dev/null
+++ b/check_emc_clariion/trunk/checkcommands.cfg
@@ -0,0 +1,12 @@
+define command{
+        command_name    check_emc_sp
+        command_line    $USER1$/check_emc_clariion.pl -H $HOSTADDRESS$ -t sp --sp $ARG1$
+}
+define command{
+        command_name    check_emc_disk
+        command_line    $USER1$/check_emc_clariion.pl -H $HOSTADDRESS$ -t disk
+}
+define command{
+        command_name    check_emc_port
+        command_line    $USER1$/check_emc_clariion.pl -H $HOSTADDRESS$ -t portstate --port $ARG1$
+}
diff --git a/check_emc_clariion/trunk/status.cli b/check_emc_clariion/trunk/status.cli
new file mode 100644
index 0000000..d106552
--- /dev/null
+++ b/check_emc_clariion/trunk/status.cli
@@ -0,0 +1,4 @@
+show node detail all
+yes
+yes
+quit
diff --git a/check_snmp_interfaces/trunk/check_snmp_cisco_ifstatus b/check_snmp_interfaces/trunk/check_snmp_cisco_ifstatus
new file mode 100755
index 0000000..76428b1
--- /dev/null
+++ b/check_snmp_interfaces/trunk/check_snmp_cisco_ifstatus
@@ -0,0 +1,778 @@
+#!/usr/bin/perl
+#
+#
+# AUTHORS:
+#	Copyright (C) 2003-2010 Opsera Limited. All rights reserved
+#
+#    This file is part of Opsview
+#
+#    Opsview is free software; you can redistribute it and/or modify
+#    it under the terms of the GNU General Public License as published by
+#    the Free Software Foundation; either version 2 of the License, or
+#    (at your option) any later version.
+#
+#    Opsview is distributed in the hope that it will be useful,
+#    but WITHOUT ANY WARRANTY; without even the implied warranty of
+#    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#    GNU General Public License for more details.
+#
+#    You should have received a copy of the GNU General Public License
+#    along with Opsview; if not, write to the Free Software
+#    Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+#
+
+use lib qw ( /usr/local/nagios/perl/lib );
+use Net::SNMP;
+use Getopt::Std;
+
+$script         = "check_snmp_cisco_ifstatus";
+$script_version = "2.1.0";
+
+# SNMP options
+$version = "2c";
+$timeout = 2;
+
+$number_of_interfaces   = 0;
+$target_interface_index = 0;
+
+@list_interfaces=undef;				# List of inappropriate interfaces;
+
+$oid_base	   = ".1.3.6.1.2.1.2.2.1.1.";	
+$oid_sysdescr      = ".1.3.6.1.2.1.1.1.0";
+$oid_ifnumber      = ".1.3.6.1.2.1.2.1.0";        # number of interfaces on device
+$oid_ifdescr       = ".1.3.6.1.2.1.2.2.1.2.";     # need to append integer for specific interface
+$oid_iftype        = ".1.3.6.1.2.1.2.2.1.3.";     # need to append integer for specific interface
+$oid_ifmtu         = ".1.3.6.1.2.1.2.2.1.4.";     # need to append integer for specific interface
+$oid_ifspeed       = ".1.3.6.1.2.1.2.2.1.5.";     # need to append integer for specific interface
+$oid_ifphysaddress = ".1.3.6.1.2.1.2.2.1.6.";     # need to append integer for specific interface
+$oid_ifadminstatus = ".1.3.6.1.2.1.2.2.1.7.";     # need to append integer for specific interface
+$oid_ifoperstatus  = ".1.3.6.1.2.1.2.2.1.8.";     # need to append integer for specific interface
+$oid_iflastchange  = ".1.3.6.1.2.1.2.2.1.9.";     # need to append integer for specific interface
+$oid_ifinerrors    = ".1.3.6.1.2.1.2.2.1.14.";    # need to append integer for specific interface
+$oid_ifouterrors   = ".1.3.6.1.2.1.2.2.1.20.";    # need to append integer for specific interface
+$oid_ifoutqlen     = ".1.3.6.1.2.1.2.2.1.21.";    # need to append integer for specific interface
+my $realbitssec;                                  # Perf data is always in bps, save this data here
+
+# Cisco Specific
+
+$oid_locIfIntBitsSec = "1.3.6.1.4.1.9.2.2.1.1.6.";    # need to append integer for specific interface
+$oid_locIfOutBitsSec = "1.3.6.1.4.1.9.2.2.1.1.8.";    # need to append integer for specific interface
+
+$ifdescr       = "n/a";
+$iftype        = "n/a";
+$ifmtu         = "n/a";
+$ifspeed       = "n/a";
+$ifphysaddress = "n/a";
+$ifadminstatus = "n/a";
+$ifoperstatus  = "n/a";
+$iflastchange  = "n/a";
+$ifinerrors    = "n/a";
+$ifouterrors   = "n/a";
+$ifoutqlen     = "n/a";
+$ifoutbitssec  = "n/a";
+
+$warning  = 100000000;    # Warning threshold
+$critical = 100000000;    # Critical threshold
+
+$hostname = "192.168.10.21";
+
+#$hostname = "212.113.28.134";
+$returnstring = "";
+
+$community      = "public";                  # Default community string
+$configfilepath = "/usr/local/nagios/etc";
+
+# Do we have enough information?
+if ( @ARGV < 1 ) {
+    print "Too few arguments\n";
+    usage();
+}
+
+getopts("hH:C:i:w:c:");
+if ($opt_h) {
+    usage();
+    exit(0);
+}
+if ($opt_H) {
+    $hostname = $opt_H;
+
+    # print "Hostname $opt_H\n";
+}
+else {
+    print "No hostname specified\n";
+    usage();
+    exit(0);
+}
+if ($opt_C) {
+    $community = $opt_C;
+}
+if ($opt_i) {
+    $target_interface = $opt_i;
+}
+if ($opt_w) {
+    $warning = $opt_w;
+}
+if ($opt_c) {
+    $critical = $opt_c;
+}
+else {
+
+    # print "Using community $community\n";
+}
+
+# Create the SNMP session
+
+$oid_sysDescr = ".1.3.6.1.2.1.1.1.0";    # Used to check whether SNMP is actually responding
+
+$version = "1";
+( $s, $e ) = Net::SNMP->session(
+    -community => $community,
+    -hostname  => $hostname,
+    -version   => $version,
+    -timeout   => $timeout,
+);
+
+if ( !defined( $s->get_request($oid_sysDescr) ) ) {
+
+    # If we can't connect using SNMPv1 lets try as SNMPv2
+    $s->close();
+    sleep 0.5;
+    $version = "2c";
+    ( $s, $e ) = Net::SNMP->session(
+        -community => $community,
+        -hostname  => $hostname,
+        -version   => $version,
+        -timeout   => $timeout,
+    );
+    if ( !defined( $s->get_request($oid_sysDescr) ) ) {
+        print "Agent not responding, tried SNMP v1 and v2\n";
+        exit(1);
+    }
+}
+
+if ( find_match() == 0 ) {
+    probe_interface();
+}
+else {
+    $status = 2;
+    print "Interface $target_interface not found on device $hostname\n";
+    exit $status;
+}
+
+# Close the session
+$s->close();
+
+if ( $status == 0 ) {
+    print "Status is OK - $returnstring\n";
+    exit $status;
+}
+elsif ( $status == 1 ) {
+    print "Status is a Warning Level - $returnstring\n";
+    exit $status;
+}
+elsif ( $status == 2 ) {
+    print "Status is CRITICAL - $returnstring\n";
+    exit $status;
+}
+else {
+    print "Plugin error! SNMP status unknown\n";
+    exit $status;
+}
+
+exit 2;
+
+#################################################
+# Finds match for supplied interface name
+#################################################
+
+sub find_match {
+	
+my $resultat = $s->get_table($oid_base);
+
+if (!defined($resultat)) {
+   printf("ERROR: NHR table : %s.\n", $s->error);
+   $s->close;
+   exit 3;
+}
+
+my @keys=undef;
+my $oidindex=0;
+foreach my $key  ( keys %$resultat) {
+	#verb("OID : $key, Desc : $$resultat{$key}" );
+	#print $$resultat{$key} + "\n";
+	$key =~ s/$oid_base//;
+	push(@keys, $key);
+	#print "$key \n";
+}
+
+#print $resultat ;
+#exit 0;
+
+
+    if ( !defined( $s->get_request($oid_ifnumber) ) ) {
+        if ( !defined( $s->get_request($oid_sysdescr) ) ) {
+            print "Status is a Warning Level - SNMP agent not responding\n";
+            exit 1;
+        }
+        else {
+            print "Status is a Warning Level - SNMP OID does not exist\n";
+            exit 1;
+        }
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $number_of_interfaces = $s->var_bind_list()->{$_};
+            if ( $number_of_interfaces == 0 ) {
+                return 1;
+            }
+        }
+    }
+
+    #$index = 1;
+    #while ( $index <= $number_of_interfaces ) {
+    foreach $index ( @keys ) {
+	my $target_interface_index = $index;
+        $oid_temp = $oid_ifdescr . $index;
+        if ( !defined( $s->get_request($oid_temp) ) ) {
+        }
+        else {
+            foreach ( $s->var_bind_names() ) {
+                $temp_interface_descr = $s->var_bind_list()->{$_};
+            }
+            if ( lc($temp_interface_descr) eq lc($target_interface) ) {
+                $target_interface_index = $index;
+            }
+        }
+
+    ############################
+    $oid_temp = $oid_ifadminstatus . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $ifadminstatus = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+
+    $oid_temp = $oid_ifoperstatus . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $ifoperstatus = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+    if ( $ifoperstatus != $ifadminstatus ) {
+	push(@list_interfaces, $temp_interface_descr);
+	#print ": $temp_interface_descr: $ifoperstatus / $ifadminstatus \n";
+    }
+
+
+
+    #    $index++;
+    }
+    my $list_interfaces = @list_interfaces;
+    my $keys = @keys;
+    if ($list_interfaces > 0) {
+	print "$list_interfaces out of $keys in inappropriate state: @list_interfaces \n";
+	exit 1
+	}
+    else {
+	print "All $keys interfaces in appropriate state\n";
+	exit 0
+    }
+    print "@list_interfaces \n";
+    if ( $target_interface_index == 0 ) {
+        return 1;
+    }
+    else {
+        return 0;
+    }
+}
+
+####################################################################
+# Gathers data about target interface                              #
+####################################################################
+
+sub probe_interface {
+
+    $oid_temp = $oid_ifdescr . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $ifdescr = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+
+    $oid_temp = $oid_iftype . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $iftype = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+
+    $oid_temp = $oid_ifmtu . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $ifmtu = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+
+    $oid_temp = $oid_ifspeed . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $ifspeed = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+
+    $oid_temp = $oid_ifadminstatus . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $ifadminstatus = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+
+    $oid_temp = $oid_ifoperstatus . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $ifoperstatus = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+
+    $oid_temp = $oid_iflastchange . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $iflastchange = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+
+    $oid_temp = $oid_ifinerrors . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $ifinerrors = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+
+    $oid_temp = $oid_ifouterrors . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $ifouterrors = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+
+    $oid_temp = $oid_ifoutqlen . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $ifoutqlen = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+
+    $oid_temp = $oid_locIfOutBitsSec . $target_interface_index;
+    if ( !defined( $s->get_request($oid_temp) ) ) {
+        $ifoutbitssec = -1;
+    }
+    else {
+        foreach ( $s->var_bind_names() ) {
+            $ifoutbitssec = $s->var_bind_list()->{$_};
+        }
+    }
+    ############################
+
+    $errorstring = "";
+
+    # Sets warning / critical levels if interface down
+
+    if ( $ifadminstatus eq "1" ) {
+    }
+    else {
+        $status      = 1;
+        $errorstring = "INTERFACE ADMINISTRATIVELY DOWN:";
+    }
+
+    if ( $ifoperstatus eq "1" ) {
+    }
+    else {
+        $status      = 2;
+        $errorstring = "INTERFACE DOWN:";
+    }
+
+    # Sets warning / critical levels if ifoutbitssec exceeds threshold
+
+    if ( $status < 1 ) {
+
+        # Don't bother is status is down
+        if ( $ifoutbitssec > $critical ) {
+            $errorstring = "HIGH THROUGHPUT:";
+            $status      = 2;
+        }
+        elsif ( $ifoutbitssec > $warning ) {
+            $errorstring = "HIGH THROUGHPUT:";
+            $status      = 1;
+        }
+    }
+
+    # Mangles interface speed
+
+    my $mbps = $ifspeed / 1000000;
+    if ( $mbps < 1 ) {
+        $ifspeed = $ifspeed / 1000;
+        $ifspeed = "$ifspeed Kbps";
+    }
+    else {
+        $ifspeed = "$mbps Mbps";
+    }
+
+    $realbitssec = $ifoutbitssec;
+
+    # Mangles IfOutBitsSec stat to bits / kbits
+    if ( $ifoutbitssec > 0 ) {
+        my $mbps = $ifoutbitssec / 1000000;
+        if ( $mbps < 1 ) {
+            $ifoutbitssec = $ifoutbitssec / 1000;
+            $ifoutbitssec = "$ifoutbitssec Kbps";
+        }
+        else {
+            $ifoutbitssec = "$mbps Mbps";
+        }
+    }
+    elsif ( $ifoutbitssec < 0 ) {
+        $ifoutbitssec = "N/A";
+    }
+    else {
+        $ifoutbitssec = "0 bps";
+    }
+
+    # Returns string relating to interface media
+    my $iftype_string = return_interfacetype($iftype);
+
+    if ( $status == 0 ) {
+        $temp = sprintf "$ifdescr ($iftype_string) - Current: $ifoutbitssec, Limit: $ifspeed, MTU: $ifmtu, Last change: $iflastchange, STATS:(in errors: $ifinerrors, out errors: $ifouterrors, queue length: $ifoutqlen)";
+        append($temp);
+    }
+    else {
+        $temp = sprintf "$errorstring $ifdescr ($iftype_string) - Current: $ifoutbitssec, Limit: $ifspeed, MTU: $ifmtu, Last change: $iflastchange, STATS:(in errors: $ifinerrors, out errors: $ifouterrors, queue length: $ifoutqlen)";
+        append($temp);
+    }
+    $perfinfo = sprintf "|bits/sec=$realbitssec";
+    append($perfinfo);
+}
+
+####################################################################
+# help and usage information                                       #
+####################################################################
+
+sub usage {
+    print << "USAGE";
+--------------------------------------------------------------------
+$script v$script_version
+
+Monitors status of specific Ethernet interface. 
+
+Usage: $script -H <hostname> -c <community> [...]
+
+Options: -H 	Hostname or IP address
+         -C 	Community (default is public)
+	 -i 	Target interface name 
+		Eg: Serial0/0, FastEthernet0/12
+	 -w	Warning threshold - Out bits / sec
+	 -c	Critical threshold - Out bits / sec
+
+--------------------------------------------------------------------	 
+Copyright (C) 2003-2010 Opsera Limited. All rights reserved	 
+	 
+This program is free software; you can redistribute it or modify
+it under the terms of the GNU General Public License
+--------------------------------------------------------------------		
+		
+USAGE
+    exit 1;
+}
+
+####################################################################
+# Appends string to existing $returnstring                         #
+####################################################################
+
+sub append {
+    my $appendstring = @_[0];
+    $returnstring = "$returnstring$appendstring";
+}
+
+####################################################################
+# Returns the interface type for given IANA metric                 #
+####################################################################
+
+sub return_interfacetype {
+    my $iftype_int   = @_[0];
+    my @iana         = ();
+    my $returnstring = $iftype_int;
+
+    $iana[0]   = "";
+    $iana[1]   = "other";
+    $iana[2]   = "regular1822";
+    $iana[3]   = "hdh1822";
+    $iana[4]   = "ddnX25";
+    $iana[5]   = "rfc877x25";
+    $iana[6]   = "ethernet";
+    $iana[7]   = "";
+    $iana[8]   = "TokenBus";
+    $iana[9]   = "TokenRing";
+    $iana[10]  = "iso88026Man";
+    $iana[11]  = "starLan";
+    $iana[12]  = "proteon10Mbit";
+    $iana[13]  = "proteon80Mbit";
+    $iana[14]  = "hyperchannel";
+    $iana[15]  = "fddi";
+    $iana[16]  = "lapb";
+    $iana[17]  = "sdlc";
+    $iana[18]  = "DSL";
+    $iana[19]  = "E1";
+    $iana[20]  = "basicISDN";
+    $iana[21]  = "primaryISDN";
+    $iana[22]  = "propritory PointToPointSerial";
+    $iana[23]  = "PPP";
+    $iana[24]  = "softwareLoopback";
+    $iana[25]  = "CLNP over IP ";
+    $iana[26]  = "ethernet3Mbit";
+    $iana[27]  = "XNS over IP";
+    $iana[28]  = "SLIP";
+    $iana[29]  = "ultra";
+    $iana[30]  = "DS3";
+    $iana[31]  = "SMDS";
+    $iana[32]  = "frameRelay DTE";
+    $iana[33]  = "RS232";
+    $iana[34]  = "Parallel port";
+    $iana[35]  = "arcnet";
+    $iana[36]  = "arcnetPlus";
+    $iana[37]  = "ATM";
+    $iana[38]  = "miox25";
+    $iana[39]  = "SONET / SDH ";
+    $iana[40]  = "X25PLE";
+    $iana[41]  = "iso88022llc";
+    $iana[42]  = "localTalk";
+    $iana[43]  = "SMDSDxi";
+    $iana[44]  = "frameRelayService";
+    $iana[45]  = "v35";
+    $iana[46]  = "hssi";
+    $iana[47]  = "hippi";
+    $iana[48]  = "Generic MODEM";
+    $iana[49]  = "";
+    $iana[50]  = "sonetPath";
+    $iana[51]  = "sonetVT";
+    $iana[52]  = "SMDSIcip";
+    $iana[53]  = "propVirtual";
+    $iana[54]  = "propMultiplexor";
+    $iana[55]  = "ieee80212 100BaseVG";
+    $iana[56]  = "fibreChannel";
+    $iana[57]  = "HIPPI interface";
+    $iana[58]  = "";
+    $iana[59]  = "ATM Emulated LAN for 802.3";
+    $iana[60]  = "ATM Emulated LAN for 802.5";
+    $iana[61]  = "ATM Emulated circuit          ";
+    $iana[62]  = "";
+    $iana[63]  = "ISDN / X.25           ";
+    $iana[64]  = "CCITT V.11/X.21             ";
+    $iana[65]  = "CCITT V.36                  ";
+    $iana[66]  = "CCITT G703 at 64Kbps";
+    $iana[67]  = "G703 at 2Mb";
+    $iana[68]  = "SNA QLLC ";
+    $iana[69]  = "";
+    $iana[70]  = "channel  ";
+    $iana[71]  = "ieee80211 radio spread spectrum       ";
+    $iana[72]  = "IBM System 360/370 OEMI Channel";
+    $iana[73]  = "IBM Enterprise Systems Connection";
+    $iana[74]  = "Data Link Switching";
+    $iana[75]  = "ISDN S/T interface";
+    $iana[76]  = "ISDN U interface";
+    $iana[77]  = "Link Access Protocol D";
+    $iana[78]  = "IP Switching Objects";
+    $iana[79]  = "Remote Source Route Bridging";
+    $iana[80]  = "ATM Logical Port";
+    $iana[81]  = "Digital Signal Level 0";
+    $iana[82]  = "ds0 Bundle (group of ds0s on the same ds1)";
+    $iana[83]  = "Bisynchronous Protocol";
+    $iana[84]  = "Asynchronous Protocol";
+    $iana[85]  = "Combat Net Radio";
+    $iana[86]  = "ISO 802.5r DTR";
+    $iana[87]  = "Ext Pos Loc Report Sys";
+    $iana[88]  = "Appletalk Remote Access Protocol";
+    $iana[89]  = "Proprietary Connectionless Protocol";
+    $iana[90]  = "CCITT-ITU X.29 PAD Protocol";
+    $iana[91]  = "CCITT-ITU X.3 PAD Facility";
+    $iana[92]  = "frameRelay MPI";
+    $iana[93]  = "CCITT-ITU X213";
+    $iana[94]  = "ADSL";
+    $iana[95]  = "Rate-Adapt. DSL";
+    $iana[96]  = "SDSL";
+    $iana[97]  = "Very High-Speed DSL";
+    $iana[98]  = "ISO 802.5 CRFP";
+    $iana[99]  = "Myricom Myrinet";
+    $iana[100] = "voiceEM voice recEive and transMit";
+    $iana[101] = "voiceFXO voice Foreign Exchange Office";
+    $iana[102] = "voiceFXS voice Foreign Exchange Station";
+    $iana[103] = "voiceEncap voice encapsulation";
+    $iana[104] = "VoIP";
+    $iana[105] = "ATM DXI";
+    $iana[106] = "ATM FUNI";
+    $iana[107] = "ATM IMA";
+    $iana[108] = "PPP Multilink Bundle";
+    $iana[109] = "IBM ipOverCdlc";
+    $iana[110] = "IBM Common Link Access to Workstn";
+    $iana[111] = "IBM stackToStack";
+    $iana[112] = "IBM VIPA";
+    $iana[113] = "IBM multi-protocol channel support";
+    $iana[114] = "IBM IP over ATM";
+    $iana[115] = "ISO 802.5j Fiber Token Ring";
+    $iana[116] = "IBM twinaxial data link control";
+    $iana[117] = "";
+    $iana[118] = "HDLC";
+    $iana[119] = "LAP F";
+    $iana[120] = "V.37";
+    $iana[121] = "X25 Multi-Link Protocol";
+    $iana[122] = "X25 Hunt Group";
+    $iana[123] = "Transp HDLC";
+    $iana[124] = "Interleave channel";
+    $iana[125] = "Fast channel";
+    $iana[126] = "IP (for APPN HPR in IP networks)";
+    $iana[127] = "CATV Mac Layer";
+    $iana[128] = "CATV Downstream interface";
+    $iana[129] = "CATV Upstream interface";
+    $iana[130] = "Avalon Parallel Processor";
+    $iana[131] = "Encapsulation interface";
+    $iana[132] = "Coffee pot (no, really)";
+    $iana[133] = "Circuit Emulation Service";
+    $iana[134] = "ATM Sub Interface";
+    $iana[135] = "Layer 2 Virtual LAN using 802.1Q";
+    $iana[136] = "Layer 3 Virtual LAN using IP";
+    $iana[137] = "Layer 3 Virtual LAN using IPX";
+    $iana[138] = "IP over Power Lines";
+    $iana[139] = "Multimedia Mail over IP";
+    $iana[140] = "Dynamic Synchronous Transfer Mode";
+    $iana[141] = "Data Communications Network";
+    $iana[142] = "IP Forwarding Interface";
+    $iana[143] = "Multi-rate Symmetric DSL";
+    $iana[144] = "IEEE1394 High Performance Serial Bus";
+    $iana[145] = "HIPPI-6400 ";
+    $iana[146] = "DVB-RCC MAC Layer";
+    $iana[147] = "DVB-RCC Downstream Channel";
+    $iana[148] = "DVB-RCC Upstream Channel";
+    $iana[149] = "ATM Virtual Interface";
+    $iana[150] = "MPLS Tunnel Virtual Interface";
+    $iana[151] = "Spatial Reuse Protocol";
+    $iana[152] = "Voice Over ATM";
+    $iana[153] = "Voice Over Frame Relay ";
+    $iana[154] = "Digital Subscriber Loop over ISDN";
+    $iana[155] = "Avici Composite Link Interface";
+    $iana[156] = "SS7 Signaling Link ";
+    $iana[157] = "Prop. P2P wireless interface";
+    $iana[158] = "Frame Forward Interface";
+    $iana[159] = "Multiprotocol over ATM AAL5";
+    $iana[160] = "USB Interface";
+    $iana[161] = "IEEE 802.3ad Link Aggregate";
+    $iana[162] = "BGP Policy Accounting";
+    $iana[163] = "FRF .16 Multilink Frame Relay ";
+    $iana[164] = "H323 Gatekeeper";
+    $iana[165] = "H323 Voice and Video Proxy";
+    $iana[166] = "MPLS";
+    $iana[167] = "Multi-frequency signaling link";
+    $iana[168] = "High Bit-Rate DSL - 2nd generation";
+    $iana[169] = "Multirate HDSL2";
+    $iana[170] = "Facility Data Link 4Kbps on a DS1";
+    $iana[171] = "Packet over SONET/SDH Interface";
+    $iana[172] = "DVB-ASI Input";
+    $iana[173] = "DVB-ASI Output ";
+    $iana[174] = "Power Line Communtications";
+    $iana[175] = "Non Facility Associated Signaling";
+    $iana[176] = "TR008";
+    $iana[177] = "Remote Digital Terminal";
+    $iana[178] = "Integrated Digital Terminal";
+    $iana[179] = "ISUP";
+    $iana[180] = "Cisco proprietary MAC layer";
+    $iana[181] = "Cisco proprietary Downstream";
+    $iana[182] = "Cisco proprietary Upstream";
+    $iana[183] = "HIPERLAN Type 2 Radio Interface";
+    $iana[184] = "PropBroadbandWirelessAccesspt2multipt";
+    $iana[185] = "SONET Overhead Channel";
+    $iana[186] = "Digital Wrapper";
+    $iana[187] = "ATM adaptation layer 2";
+    $iana[188] = "MAC layer over radio links";
+    $iana[189] = "ATM over radio links   ";
+    $iana[190] = "Inter Machine Trunks";
+    $iana[191] = "Multiple Virtual Lines DSL";
+    $iana[192] = "Long Reach DSL";
+    $iana[193] = "Frame Relay DLCI End Point";
+    $iana[194] = "ATM VCI End Point";
+    $iana[195] = "Optical Channel";
+    $iana[196] = "Optical Transport";
+    $iana[197] = "Proprietary ATM       ";
+    $iana[198] = "Voice Over Cable Interface";
+    $iana[199] = "Infiniband";
+    $iana[200] = "TE Link";
+    $iana[201] = "Q.2931";
+    $iana[202] = "Virtual Trunk Group";
+    $iana[203] = "SIP Trunk Group";
+    $iana[204] = "SIP Signaling   ";
+    $iana[205] = "CATV Upstream Channel";
+    $iana[206] = "Acorn Econet";
+    $iana[207] = "FSAN 155Mb Symetrical PON interface";
+    $iana[208] = "FSAN622Mb Symetrical PON interface";
+    $iana[209] = "Transparent bridge interface";
+    $iana[210] = "Interface common to multiple lines";
+    $iana[211] = "voice E&M Feature Group D";
+    $iana[212] = "voice FGD Exchange Access North American";
+    $iana[213] = "voice Direct Inward Dialing";
+    $iana[214] = "MPEG transport interface";
+    $iana[215] = "6to4 interface";
+    $iana[216] = "GTP (GPRS Tunneling Protocol)";
+    $iana[217] = "Paradyne EtherLoop 1";
+    $iana[218] = "Paradyne EtherLoop 2";
+    $iana[219] = "Optical Channel Group";
+    $iana[220] = "HomePNA ITU-T G.989";
+    $iana[221] = "Generic Framing Procedure (GFP)";
+    $iana[222] = "Layer 2 Virtual LAN using Cisco ISL";
+    $iana[223] = "Acteleis proprietary MetaLOOP High Speed Link ";
+    $iana[224] = "FCIP Link ";
+    $iana[225] = "Resilient Packet Ring Interface Type";
+    $iana[226] = "RF Qam Interface";
+    $iana[227] = "Link Management Protocol";
+
+    if ( $iftype_int > 227 ) {
+        $returnstring = "$iftype_int";
+    }
+    else {
+        $returnstring = $iana[$iftype_int];
+    }
+
+    return ($returnstring);
+
+}